Slark Xiao <slark_xiao@xxxxxxx> writes: > There are 2 models for MV32 serials. MV32-W-A is designed > based on Qualcomm SDX62 chip, and MV32-W-B is designed based > on Qualcomm SDX65 chip. So we use 2 different PID to separate it. > > Test evidence as below: > T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1e2d ProdID=00f3 Rev=05.04 > S: Manufacturer=Cinterion > S: Product=Cinterion PID 0x00F3 USB Mobile Broadband > S: SerialNumber=d7b4be8d > C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan > I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > > T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 > D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=1e2d ProdID=00f4 Rev=05.04 > S: Manufacturer=Cinterion > S: Product=Cinterion PID 0x00F4 USB Mobile Broadband > S: SerialNumber=d095087d > C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA > I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan > I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option > I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option > > Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx> Thanks for answering all my questions so fast. This patch looks very good to me Acked-by: Bjørn Mork <bjorn@xxxxxxx>
