onboard_hub_power_off() currently has a delay after asserting the
reset of the hub. There is already a delay in onboard_hub_power_on()
before de-asserting the reset, which ensures that the reset is
asserted for the required time, so the delay in _power_off() is not
needed.
Skip the reset GPIO check before calling gpiod_set_value_cansleep(),
the function returns early when the GPIO descriptor is NULL.
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
drivers/usb/misc/onboard_usb_hub.c | 5 +----
1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
index d1df153e7f5a..d63c63942af1 100644
--- a/drivers/usb/misc/onboard_usb_hub.c
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -71,10 +71,7 @@ static int onboard_hub_power_off(struct onboard_hub *hub)
{
int err;
- if (hub->reset_gpio) {
- gpiod_set_value_cansleep(hub->reset_gpio, 1);
- fsleep(hub->pdata->reset_us);
- }
+ gpiod_set_value_cansleep(hub->reset_gpio, 1);
err = regulator_disable(hub->vdd);
if (err) {
--
2.37.1.559.g78731f0fdb-goog
