The TI TUSB320 seems like a better fit for USB TYPE-C subsystem,
which can expose details collected by the TUSB320 in a far more
precise way than extcon. Since there are existing users in the
kernel and in DT which depend on the extcon interface, keep it
for now.
Add TYPE-C interface and expose the supported supply current,
direction and connector polarity via the TYPE-C interface.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
Cc: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
To: linux-usb@xxxxxxxxxxxxxxx
---
drivers/extcon/Kconfig | 2 +-
drivers/extcon/extcon-usbc-tusb320.c | 159 +++++++++++++++++++++++++++
2 files changed, 160 insertions(+), 1 deletion(-)
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig
index c69d40ae5619a..7684b3afa6304 100644
--- a/drivers/extcon/Kconfig
+++ b/drivers/extcon/Kconfig
@@ -180,7 +180,7 @@ config EXTCON_USBC_CROS_EC
config EXTCON_USBC_TUSB320
tristate "TI TUSB320 USB-C extcon support"
- depends on I2C
+ depends on I2C && TYPEC
select REGMAP_I2C
help
Say Y here to enable support for USB Type C cable detection extcon
diff --git a/drivers/extcon/extcon-usbc-tusb320.c b/drivers/extcon/extcon-usbc-tusb320.c
index aced4bbb455dc..edb8c3f997c91 100644
--- a/drivers/extcon/extcon-usbc-tusb320.c
+++ b/drivers/extcon/extcon-usbc-tusb320.c
@@ -6,6 +6,7 @@
* Author: Michael Auchter <michael.auchter@xxxxxx>
*/
+#include <linux/bitfield.h>
#include <linux/extcon-provider.h>
#include <linux/i2c.h>
#include <linux/init.h>
@@ -13,6 +14,24 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/regmap.h>
+#include <linux/usb/typec.h>
+
+#define TUSB320_REG8 0x8
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE GENMASK(7, 6)
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB 0x0
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A 0x1
+#define TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A 0x2
+#define TUSB320_REG8_CURRENT_MODE_DETECT GENMASK(5, 4)
+#define TUSB320_REG8_CURRENT_MODE_DETECT_DEF 0x0
+#define TUSB320_REG8_CURRENT_MODE_DETECT_MED 0x1
+#define TUSB320_REG8_CURRENT_MODE_DETECT_ACC 0x2
+#define TUSB320_REG8_CURRENT_MODE_DETECT_HI 0x3
+#define TUSB320_REG8_ACCESSORY_CONNECTED GENMASK(3, 2)
+#define TUSB320_REG8_ACCESSORY_CONNECTED_NONE 0x0
+#define TUSB320_REG8_ACCESSORY_CONNECTED_AUDIO 0x4
+#define TUSB320_REG8_ACCESSORY_CONNECTED_ACC 0x5
+#define TUSB320_REG8_ACCESSORY_CONNECTED_DEBUG 0x6
+#define TUSB320_REG8_ACTIVE_CABLE_DETECTION BIT(0)
#define TUSB320_REG9 0x9
#define TUSB320_REG9_ATTACHED_STATE_SHIFT 6
@@ -55,6 +74,10 @@ struct tusb320_priv {
struct extcon_dev *edev;
struct tusb320_ops *ops;
enum tusb320_attached_state state;
+ struct typec_port *port;
+ struct typec_capability cap;
+ enum typec_port_type port_type;
+ enum typec_pwr_opmode pwr_opmode;
};
static const char * const tusb_attached_states[] = {
@@ -184,6 +207,44 @@ static struct tusb320_ops tusb320l_ops = {
.get_revision = tusb320l_get_revision,
};
+static int tusb320_set_adv_pwr_mode(struct tusb320_priv *priv)
+{
+ u8 mode;
+
+ if (priv->pwr_opmode == TYPEC_PWR_MODE_USB)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_USB;
+ else if (priv->pwr_opmode == TYPEC_PWR_MODE_1_5A)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_15A;
+ else if (priv->pwr_opmode == TYPEC_PWR_MODE_3_0A)
+ mode = TUSB320_REG8_CURRENT_MODE_ADVERTISE_30A;
+ else /* No other mode is supported. */
+ return -EINVAL;
+
+ return regmap_write_bits(priv->regmap, TUSB320_REG8,
+ TUSB320_REG8_CURRENT_MODE_ADVERTISE,
+ FIELD_PREP(TUSB320_REG8_CURRENT_MODE_ADVERTISE,
+ mode));
+}
+
+static int tusb320_port_type_set(struct typec_port *port,
+ enum typec_port_type type)
+{
+ struct tusb320_priv *priv = typec_get_drvdata(port);
+
+ if (type == TYPEC_PORT_SRC)
+ return priv->ops->set_mode(priv, TUSB320_MODE_DFP);
+ else if (type == TYPEC_PORT_SNK)
+ return priv->ops->set_mode(priv, TUSB320_MODE_UFP);
+ else if (type == TYPEC_PORT_DRP)
+ return priv->ops->set_mode(priv, TUSB320_MODE_DRP);
+ else
+ return priv->ops->set_mode(priv, TUSB320_MODE_PORT);
+}
+
+static const struct typec_operations tusb320_typec_ops = {
+ .port_type_set = tusb320_port_type_set,
+};
+
static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
{
int state, polarity;
@@ -211,6 +272,47 @@ static void tusb320_extcon_irq_handler(struct tusb320_priv *priv, u8 reg)
priv->state = state;
}
+static void tusb320_typec_irq_handler(struct tusb320_priv *priv, u8 reg9)
+{
+ struct typec_port *port = priv->port;
+ struct device *dev = priv->dev;
+ u8 mode, role, state;
+ int ret, reg8;
+ bool ori;
+
+ ori = reg9 & TUSB320_REG9_CABLE_DIRECTION;
+ typec_set_orientation(port, ori ? TYPEC_ORIENTATION_REVERSE :
+ TYPEC_ORIENTATION_NORMAL);
+
+ state = (reg9 >> TUSB320_REG9_ATTACHED_STATE_SHIFT) &
+ TUSB320_REG9_ATTACHED_STATE_MASK;
+ if (state == TUSB320_ATTACHED_STATE_DFP)
+ role = TYPEC_SOURCE;
+ else
+ role = TYPEC_SINK;
+
+ typec_set_vconn_role(port, role);
+ typec_set_pwr_role(port, role);
+ typec_set_data_role(port, role == TYPEC_SOURCE ?
+ TYPEC_HOST : TYPEC_DEVICE);
+
+ ret = regmap_read(priv->regmap, TUSB320_REG8, ®8);
+ if (ret) {
+ dev_err(dev, "error during reg8 i2c read, ret=%d!\n", ret);
+ return;
+ }
+
+ mode = FIELD_GET(TUSB320_REG8_CURRENT_MODE_DETECT, reg8);
+ if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_DEF)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
+ else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_MED)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_1_5A);
+ else if (mode == TUSB320_REG8_CURRENT_MODE_DETECT_HI)
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_3_0A);
+ else /* Charge through accessory */
+ typec_set_pwr_opmode(port, TYPEC_PWR_MODE_USB);
+}
+
static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
{
struct tusb320_priv *priv = dev_id;
@@ -225,6 +327,7 @@ static irqreturn_t tusb320_irq_handler(int irq, void *dev_id)
return IRQ_NONE;
tusb320_extcon_irq_handler(priv, reg);
+ tusb320_typec_irq_handler(priv, reg);
regmap_write(priv->regmap, TUSB320_REG9, reg);
@@ -260,6 +363,58 @@ static int tusb320_extcon_probe(struct tusb320_priv *priv)
return 0;
}
+static int tusb320_typec_probe(struct i2c_client *client,
+ struct tusb320_priv *priv)
+{
+ struct fwnode_handle *connector;
+ const char *cap_str;
+ int ret;
+
+ /* The Type-C connector is optional, for backward compatibility. */
+ connector = device_get_named_child_node(&client->dev, "connector");
+ if (!connector)
+ return 0;
+
+ /* Type-C connector found. */
+ ret = typec_get_fw_cap(&priv->cap, connector);
+ if (ret)
+ return ret;
+
+ priv->port_type = priv->cap.type;
+
+ /* This goes into register 0x8 field CURRENT_MODE_ADVERTISE */
+ ret = fwnode_property_read_string(connector, "typec-power-opmode", &cap_str);
+ if (ret)
+ return ret;
+
+ ret = typec_find_pwr_opmode(cap_str);
+ if (ret < 0)
+ return ret;
+ if (ret == TYPEC_PWR_MODE_PD)
+ return -EINVAL;
+
+ priv->pwr_opmode = ret;
+
+ /* Initialize the hardware with the devicetree settings. */
+ ret = tusb320_set_adv_pwr_mode(priv);
+ if (ret)
+ return ret;
+
+ priv->cap.revision = USB_TYPEC_REV_1_1;
+ priv->cap.accessory[0] = TYPEC_ACCESSORY_AUDIO;
+ priv->cap.accessory[1] = TYPEC_ACCESSORY_DEBUG;
+ priv->cap.orientation_aware = true;
+ priv->cap.driver_data = priv;
+ priv->cap.ops = &tusb320_typec_ops;
+ priv->cap.fwnode = connector;
+
+ priv->port = typec_register_port(&client->dev, &priv->cap);
+ if (IS_ERR(priv->port))
+ return PTR_ERR(priv->port);
+
+ return 0;
+}
+
static int tusb320_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
@@ -300,6 +455,10 @@ static int tusb320_probe(struct i2c_client *client,
if (ret)
return ret;
+ ret = tusb320_typec_probe(client, priv);
+ if (ret)
+ return ret;
+
/* update initial state */
tusb320_irq_handler(client->irq, priv);
--
2.35.1
