Re: [PATCH v6 12/13] leds: flash: mt6370: Add MediaTek MT6370 flashlight support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andy,

>
> > +#define MT6370_ITORCH_MIN_UA           25000
> > +#define MT6370_ITORCH_STEP_UA          12500
> > +#define MT6370_ITORCH_MAX_UA           400000
> > +#define MT6370_ITORCH_DOUBLE_MAX_UA    800000
> > +#define MT6370_ISTRB_MIN_UA            50000
> > +#define MT6370_ISTRB_STEP_UA           12500
> > +#define MT6370_ISTRB_MAX_UA            1500000
> > +#define MT6370_ISTRB_DOUBLE_MAX_UA     3000000
>
> Perhaps _uA would be better and consistent across your series
> regarding current units.
>

Yes, _uA will be more consistent, but in general, using upper case in
the define macro is a convention, doesn't it?

>
> > +       /*
> > +        * For the flash to turn on/off, need to wait for HW ramping up/down time
>
> we need
>
> > +        * 5ms/500us to prevent the unexpected problem.
> > +        */
> > +       if (!prev && curr)
> > +               usleep_range(5000, 6000);
> > +       else if (prev && !curr)
> > +               udelay(500);
>
> This still remains unanswered, why in the first place we allow
> switching, and a busy loop in the other place?

If I refine the description to
"For the flash to turn on/off, need to wait for 5ms/500us analog settling time.
If any flash led is already used, then the analog is settled done, we
don't need to wait again."
is it answer the question?


Best regards,
Alice



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux