[PATCH] arm64: dts: verdin-imx8mm: add otg2 pd to usbphy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

The Verdin iMX8M Mini System on Module does not have VBUS signal
connected on Verdin USB_2 (usbotg2). On Verdin Development board this is
no problem, as we have connected a USB-Hub that is always connected.

However, if Verdin USB_2 is desired to be used as a single USB-Host port
the chipidea driver does not detect if a USB device is plugged into this
port, due to runtime pm shutting down the PHY.

Add the power-domain &pgc_otg2 to &usbphynop2 in order to detect
plugging events and enumerate the usb device.

Fixes: 6a57f224f734 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>

---

 arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
index eafa88d980b3..197da74837ca 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-verdin.dtsi
@@ -737,6 +737,7 @@ &usbphynop1 {
 };
 
 &usbphynop2 {
+	power-domains = <&pgc_otg2>;
 	vcc-supply = <&reg_vdd_3v3>;
 };
 
-- 
2.37.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux