Am Freitag, 15. Juli 2022, 21:50:41 CEST schrieb Matthias Kaehlcke:
> On Fri, Jul 15, 2022 at 09:33:00AM +0200, Alexander Stein wrote:
> > This is a 4-port 3.0 USB hub.
> >
> > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
> > ---
> > Changes in v2:
> > * Add devtype data containing waiting times
> >
> > drivers/usb/misc/onboard_usb_hub.c | 3 +++
> > drivers/usb/misc/onboard_usb_hub.h | 7 +++++++
> > 2 files changed, 10 insertions(+)
> >
> > diff --git a/drivers/usb/misc/onboard_usb_hub.c
> > b/drivers/usb/misc/onboard_usb_hub.c index 1dd7f4767def..319b4b1748fb
> > 100644
> > --- a/drivers/usb/misc/onboard_usb_hub.c
> > +++ b/drivers/usb/misc/onboard_usb_hub.c
> > @@ -339,6 +339,7 @@ static struct platform_driver onboard_hub_driver = {
> >
> > /************************** USB driver **************************/
> >
> > #define VENDOR_ID_REALTEK 0x0bda
> >
> > +#define VENDOR_ID_TI 0x0451
> >
> > /*
> >
> > * Returns the onboard_hub platform device that is associated with the
> > USB
> >
> > @@ -416,6 +417,8 @@ static const struct usb_device_id
> > onboard_hub_id_table[] = {>
> > { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
> > { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
> > { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
> >
> > + { USB_DEVICE(VENDOR_ID_TI, 0x8140) }, /* TI USB8041 3.0 */
> > + { USB_DEVICE(VENDOR_ID_TI, 0x8142) }, /* TI USB8041 2.0 */
> >
> > {}
> >
> > };
> > MODULE_DEVICE_TABLE(usb, onboard_hub_id_table);
> >
> > diff --git a/drivers/usb/misc/onboard_usb_hub.h
> > b/drivers/usb/misc/onboard_usb_hub.h index 7e743f4c8aaa..fcb6a9024bbd
> > 100644
> > --- a/drivers/usb/misc/onboard_usb_hub.h
> > +++ b/drivers/usb/misc/onboard_usb_hub.h
> > @@ -11,7 +11,14 @@ struct onboard_hub_devtype_data {
> >
> > unsigned long reset_duration; /* reset pulse width in
us */
> >
> > };
> >
> > +static const struct onboard_hub_devtype_data ti_tusb8041_data = {
> > + .power_stable_time = 3000,
> > + .reset_duration = 3000,
>
> Aren't these two values actually the same thing, i.e. the minimum
> duration of the reset?
>
> From the data sheet:
>
> A minimum reset duration of 3 ms is required
>
> td2: VDD and VDD33 stable before de-assertion of GRSTz (>= 3ms)
>
> My understanding is that td2 is just another expression of the first
> requirement.
They may have the same values, but IMHO they are applied differently.
'power_stable_time' (or power_stable_us now) applies after supplying power,
while 'reset_duration' (or reset_us now) applies when you deassert the reset
line.
For that reason I would like to keep them separated.
Thanks and best regards,
Alexander
