From: Frans Klaver <frans.klaver@xxxxxxxxxxx>
Support for QDL mode is already present for EM9191 modules, but the
non-QDL mode appears to be missing. Add it now.
T: Bus=03 Lev=03 Prnt=04 Port=01 Cnt=02 Dev#= 17 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1199 ProdID=90d3 Rev=00.06
S: Manufacturer=Sierra Wireless, Incorporated
S: Product=Sierra Wireless EM9191
S: SerialNumber=8W0463003002A114
C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=qcserial
I: If#=0x4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=qcserial
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Frans Klaver <frans.klaver@xxxxxxxxxxx>
---
I noticed an e-mail address discrepancy that git-send-email didn't
magically fix for me. No change otherwise.
drivers/usb/serial/qcserial.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index 586ef5551e76e..73f6d3a37c0c4 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -166,6 +166,7 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x1199, 0x9090)}, /* Sierra Wireless EM7565 QDL */
{DEVICE_SWI(0x1199, 0x9091)}, /* Sierra Wireless EM7565 */
{DEVICE_SWI(0x1199, 0x90d2)}, /* Sierra Wireless EM9191 QDL */
+ {DEVICE_SWI(0x1199, 0x90d3)}, /* Sierra Wireless EM9191 */
{DEVICE_SWI(0x1199, 0xc080)}, /* Sierra Wireless EM7590 QDL */
{DEVICE_SWI(0x1199, 0xc081)}, /* Sierra Wireless EM7590 */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
--
2.37.1
