On Wed, Jul 06, 2022 at 04:34:33PM +0800, Xin Ji wrote:
> Add driver for analogix ANX7411 USB Type-C DRP port controller.
>
> Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> ---
> V12 -> V13 :
> 1. Add driver description
> 2. Checking return value for each i2c operation
> V11 -> V12 : Remove all define in anx7411.h to anx7411.c
> V10 -> V11 : Fix Heikki's comment, code clean up
> V9 -> V10 : Rebase on the latest code
> V6 -> V7 : Fix Heikki's comment
> Rebase on Greg's latest usb-next branch
> Move tcpci.h to include/linux/usb/
> Remove double definition
> V5 -> V6 : Fix Heikki's comment
> V4 -> V5 : Fix Greg h-k comment, remove DEBUG define
> V3 -> V4 : Fix compiling waring
> V2 -> V3 : Add changelog history
> V1 -> V2 : Fix compiling warning issue
>
> Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> ---
> drivers/usb/typec/Kconfig | 11 +
> drivers/usb/typec/Makefile | 1 +
> drivers/usb/typec/anx7411.c | 1586 +++++++++++++++++++++++++++++++++++
> 3 files changed, 1598 insertions(+)
> create mode 100644 drivers/usb/typec/anx7411.c
>
> diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> index ba24847fb245..5defdfead653 100644
> --- a/drivers/usb/typec/Kconfig
> +++ b/drivers/usb/typec/Kconfig
> @@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"
>
> source "drivers/usb/typec/tipd/Kconfig"
>
> +config TYPEC_ANX7411
> + tristate "Analogix ANX7411 Type-C DRP Port controller driver"
> + depends on I2C
> + depends on USB_ROLE_SWITCH
> + help
> + Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
> + controller driver.
> +
> + If you choose to build this driver as a dynamically linked module, the
> + module will be called anx7411.ko.
> +
> config TYPEC_RT1719
> tristate "Richtek RT1719 Sink Only Type-C controller driver"
> depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
> diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> index 2f174cd3e5df..dac5c11a3234 100644
> --- a/drivers/usb/typec/Makefile
> +++ b/drivers/usb/typec/Makefile
> @@ -6,6 +6,7 @@ obj-$(CONFIG_TYPEC) += altmodes/
> obj-$(CONFIG_TYPEC_TCPM) += tcpm/
> obj-$(CONFIG_TYPEC_UCSI) += ucsi/
> obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
> +obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o
> obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
> obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
> obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
> diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
> new file mode 100644
> index 000000000000..a958822b8a66
> --- /dev/null
> +++ b/drivers/usb/typec/anx7411.c
> @@ -0,0 +1,1586 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/*
> + * Driver for Analogix ANX7411 USB Type-C and PD controller
> + *
> + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> + *
> + */
> +#include <linux/gpio/consumer.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regulator/consumer.h>
> +#include <linux/slab.h>
> +#include <linux/types.h>
> +#include <linux/usb/pd.h>
> +#include <linux/usb/role.h>
> +#include <linux/usb/tcpci.h>
> +#include <linux/usb/typec.h>
> +#include <linux/usb/typec_dp.h>
> +#include <linux/usb/typec_mux.h>
> +#include <linux/workqueue.h>
> +#include <linux/power_supply.h>
> +
> +#define TCPC_ADDRESS1 0x58
> +#define TCPC_ADDRESS2 0x56
> +#define TCPC_ADDRESS3 0x54
> +#define TCPC_ADDRESS4 0x52
> +#define SPI_ADDRESS1 0x7e
> +#define SPI_ADDRESS2 0x6e
> +#define SPI_ADDRESS3 0x64
> +#define SPI_ADDRESS4 0x62
> +
> +struct anx7411_i2c_select {
> + u8 tcpc_address;
> + u8 spi_address;
> +};
> +
> +#define VID_ANALOGIX 0x1F29
> +#define PID_ANALOGIX 0x7411
> +
> +/* TCPC register define */
> +
> +#define ANALOG_CTRL_10 0xAA
> +
> +#define STATUS_LEN 2
> +#define ALERT_0 0xCB
> +#define RECEIVED_MSG BIT(7)
> +#define SOFTWARE_INT BIT(6)
> +#define MSG_LEN 32
> +#define HEADER_LEN 2
> +#define MSG_HEADER 0x00
> +#define MSG_TYPE 0x01
> +#define MSG_RAWDATA 0x02
> +#define MSG_LEN_MASK 0x1F
> +
> +#define ALERT_1 0xCC
> +#define INTP_POW_ON BIT(7)
> +#define INTP_POW_OFF BIT(6)
> +
> +#define VBUS_THRESHOLD_H 0xDD
> +#define VBUS_THRESHOLD_L 0xDE
> +
> +#define FW_CTRL_0 0xF0
> +#define UNSTRUCT_VDM_EN BIT(0)
> +#define DELAY_200MS BIT(1)
> +#define VSAFE0 0
> +#define VSAFE1 BIT(2)
> +#define VSAFE2 BIT(3)
> +#define VSAFE3 (BIT(2) | BIT(3))
> +#define FRS_EN BIT(7)
> +
> +#define FW_PARAM 0xF1
> +#define DONGLE_IOP BIT(0)
> +
> +#define FW_CTRL_2 0xF7
> +#define SINK_CTRL_DIS_FLAG BIT(5)
> +
> +/* SPI register define */
> +#define OCM_CTRL_0 0x6E
> +#define OCM_RESET BIT(6)
> +
> +#define MAX_VOLTAGE 0xAC
> +#define MAX_POWER 0xAD
> +#define MIN_POWER 0xAE
> +
> +#define REQUEST_VOLTAGE 0xAF
> +#define VOLTAGE_UNIT 100 /* mV per unit */
> +
> +#define REQUEST_CURRENT 0xB1
> +#define CURRENT_UNIT 50 /* mA per unit */
> +
> +#define CMD_SEND_BUF 0xC0
> +#define CMD_RECV_BUF 0xE0
> +
> +#define REQ_VOL_20V_IN_100MV 0xC8
> +#define REQ_CUR_2_25A_IN_50MA 0x2D
> +#define REQ_CUR_3_25A_IN_50MA 0x41
> +
> +#define DEF_5V 5000
> +#define DEF_1_5A 1500
> +
> +#define LOBYTE(w) ((u8)(w) & 0xFF)
> +#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF))
> +
> +enum anx7411_typec_message_type {
> + TYPE_SRC_CAP = 0x00,
> + TYPE_SNK_CAP = 0x01,
> + TYPE_SNK_IDENTITY = 0x02,
> + TYPE_SVID = 0x03,
> + TYPE_SET_SNK_DP_CAP = 0x08,
> + TYPE_PSWAP_REQ = 0x10,
> + TYPE_DSWAP_REQ = 0x11,
> + TYPE_VDM = 0x14,
> + TYPE_OBJ_REQ = 0x16,
> + TYPE_DP_ALT_ENTER = 0x19,
> + TYPE_DP_DISCOVER_MODES_INFO = 0x27,
> + TYPE_GET_DP_CONFIG = 0x29,
> + TYPE_DP_CONFIGURE = 0x2A,
> + TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
> + TYPE_GET_DP_ALT_ENTER = 0x2F,
> +};
> +
> +#define FW_CTRL_1 0xB2
> +#define AUTO_PD_EN BIT(1)
> +#define TRYSRC_EN BIT(2)
> +#define TRYSNK_EN BIT(3)
> +#define FORCE_SEND_RDO BIT(6)
> +
> +#define FW_VER 0xB4
> +#define FW_SUBVER 0xB5
> +
> +#define INT_MASK 0xB6
> +#define INT_STS 0xB7
> +#define OCM_BOOT_UP BIT(0)
> +#define OC_OV_EVENT BIT(1)
> +#define VCONN_CHANGE BIT(2)
> +#define VBUS_CHANGE BIT(3)
> +#define CC_STATUS_CHANGE BIT(4)
> +#define DATA_ROLE_CHANGE BIT(5)
> +#define PR_CONSUMER_GOT_POWER BIT(6)
> +#define HPD_STATUS_CHANGE BIT(7)
> +
> +#define SYSTEM_STSTUS 0xB8
> +/* 0: SINK off; 1: SINK on */
> +#define SINK_STATUS BIT(1)
> +/* 0: VCONN off; 1: VCONN on*/
> +#define VCONN_STATUS BIT(2)
> +/* 0: vbus off; 1: vbus on*/
> +#define VBUS_STATUS BIT(3)
> +/* 1: host; 0:device*/
> +#define DATA_ROLE BIT(5)
> +/* 0: Chunking; 1: Unchunked*/
> +#define SUPPORT_UNCHUNKING BIT(6)
> +/* 0: HPD low; 1: HPD high*/
> +#define HPD_STATUS BIT(7)
> +
> +#define DATA_DFP 1
> +#define DATA_UFP 2
> +#define POWER_SOURCE 1
> +#define POWER_SINK 2
> +
> +#define CC_STATUS 0xB9
> +#define CC1_RD BIT(0)
> +#define CC2_RD BIT(4)
> +#define CC1_RA BIT(1)
> +#define CC2_RA BIT(5)
> +#define CC1_RD BIT(0)
> +#define CC1_RP(cc) (((cc) >> 2) & 0x03)
> +#define CC2_RP(cc) (((cc) >> 6) & 0x03)
> +
> +#define PD_REV_INIT 0xBA
> +
> +#define PD_EXT_MSG_CTRL 0xBB
> +#define SRC_CAP_EXT_REPLY BIT(0)
> +#define MANUFACTURER_INFO_REPLY BIT(1)
> +#define BATTERY_STS_REPLY BIT(2)
> +#define BATTERY_CAP_REPLY BIT(3)
> +#define ALERT_REPLY BIT(4)
> +#define STATUS_REPLY BIT(5)
> +#define PPS_STATUS_REPLY BIT(6)
> +#define SNK_CAP_EXT_REPLY BIT(7)
> +
> +#define NO_CONNECT 0x00
> +#define USB3_1_CONNECTED 0x01
> +#define DP_ALT_4LANES 0x02
> +#define USB3_1_DP_2LANES 0x03
> +#define CC1_CONNECTED 0x01
> +#define CC2_CONNECTED 0x02
> +#define SELECT_PIN_ASSIGMENT_C 0x04
> +#define SELECT_PIN_ASSIGMENT_D 0x08
> +#define SELECT_PIN_ASSIGMENT_E 0x10
> +#define SELECT_PIN_ASSIGMENT_U 0x00
> +#define REDRIVER_ADDRESS 0x20
> +#define REDRIVER_OFFSET 0x00
> +
> +#define DP_SVID 0xFF01
> +#define VDM_ACK 0x40
> +#define VDM_CMD_RES 0x00
> +#define VDM_CMD_DIS_ID 0x01
> +#define VDM_CMD_DIS_SVID 0x02
> +#define VDM_CMD_DIS_MOD 0x03
> +#define VDM_CMD_ENTER_MODE 0x04
> +#define VDM_CMD_EXIT_MODE 0x05
> +#define VDM_CMD_ATTENTION 0x06
> +#define VDM_CMD_GET_STS 0x10
> +#define VDM_CMD_AND_ACK_MASK 0x5F
> +
> +#define MAX_ALTMODE 2
> +
> +#define HAS_SOURCE_CAP BIT(0)
> +#define HAS_SINK_CAP BIT(1)
> +#define HAS_SINK_WATT BIT(2)
> +
> +enum anx7411_psy_state {
> + /* copy from drivers/usb/typec/tcpm */
> + ANX7411_PSY_OFFLINE = 0,
> + ANX7411_PSY_FIXED_ONLINE,
> +
> + /* private */
> + /* PD keep in, but disconnct power to bq25700,
> + * this state can be active when higher capacity adapter plug in,
> + * and change to ONLINE state when higher capacity adapter plug out
> + */
> + ANX7411_PSY_HANG = 0xff,
> +};
> +
> +struct typec_params {
> + int request_current; /* ma */
> + int request_voltage; /* mv */
> + int cc_connect;
> + int cc_orientation_valid;
> + int cc_status;
> + int data_role;
> + int power_role;
> + int vconn_role;
> + int dp_altmode_enter;
> + int cust_altmode_enter;
> + struct usb_role_switch *role_sw;
> + struct typec_port *port;
> + struct typec_partner *partner;
> + struct typec_mux_dev *typec_mux;
> + struct typec_switch_dev *typec_switch;
> + struct typec_altmode *amode[MAX_ALTMODE];
> + struct typec_altmode *port_amode[MAX_ALTMODE];
> + struct typec_displayport_data data;
> + int pin_assignment;
> + struct typec_capability caps;
> + u32 src_pdo[PDO_MAX_OBJECTS];
> + u32 sink_pdo[PDO_MAX_OBJECTS];
> + u8 caps_flags;
> + u8 src_pdo_nr;
> + u8 sink_pdo_nr;
> + u8 sink_watt;
> + u8 sink_voltage;
> +};
> +
> +#define MAX_BUF_LEN 30
> +struct fw_msg {
> + u8 msg_len;
> + u8 msg_type;
> + u8 buf[MAX_BUF_LEN];
> +} __packed;
> +
> +struct anx7411_data {
> + int fw_version;
> + int fw_subversion;
> + struct i2c_client *tcpc_client;
> + struct i2c_client *spi_client;
> + struct fw_msg send_msg;
> + struct fw_msg recv_msg;
> + struct gpio_desc *intp_gpiod;
> + struct fwnode_handle *connector_fwnode;
> + struct typec_params typec;
> + int intp_irq;
> + struct work_struct work;
> + struct workqueue_struct *workqueue;
> + /* Lock for interrupt work queue */
> + struct mutex lock;
> +
> + enum anx7411_psy_state psy_online;
> + enum power_supply_usb_type usb_type;
> + struct power_supply *psy;
> + struct power_supply_desc psy_desc;
> + struct device *dev;
> +};
> +
> +static u8 snk_identity[] = {
> + LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */
> + 0x00, 0x00, 0x00, 0x00, /* snk_cert */
> + 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */
> +};
> +
> +static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
> +
> +static int anx7411_reg_read(struct i2c_client *client,
> + u8 reg_addr)
> +{
> + return i2c_smbus_read_byte_data(client, reg_addr);
> +}
> +
> +static int anx7411_reg_block_read(struct i2c_client *client,
> + u8 reg_addr, u8 len, u8 *buf)
> +{
> + return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
> +}
> +
> +static int anx7411_reg_write(struct i2c_client *client,
> + u8 reg_addr, u8 reg_val)
> +{
> + return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
> +}
> +
> +static int anx7411_reg_block_write(struct i2c_client *client,
> + u8 reg_addr, u8 len, u8 *buf)
> +{
> + return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
> +}
> +
> +static struct anx7411_i2c_select anx7411_i2c_addr[] = {
> + {TCPC_ADDRESS1, SPI_ADDRESS1},
> + {TCPC_ADDRESS2, SPI_ADDRESS2},
> + {TCPC_ADDRESS3, SPI_ADDRESS3},
> + {TCPC_ADDRESS4, SPI_ADDRESS4},
> +};
> +
> +static int anx7411_detect_power_mode(struct anx7411_data *ctx)
> +{
> + int ret;
> + int mode;
> +
> + ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> + if (ret < 0)
> + return ret;
> +
> + ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
> +
> + ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> + if (ret < 0)
> + return ret;
> +
> + ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
> +
> + if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
> + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> + power_supply_changed(ctx->psy);
> + }
> +
> + if (!ctx->typec.cc_orientation_valid)
> + return 0;
> +
> + if (ctx->typec.cc_connect == CC1_CONNECTED)
> + mode = CC1_RP(ctx->typec.cc_status);
> + else
> + mode = CC2_RP(ctx->typec.cc_status);
> + if (mode) {
> + typec_set_pwr_opmode(ctx->typec.port, mode - 1);
> + return 0;
> + }
> +
> + typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
> +
> + return 0;
> +}
> +
> +static int anx7411_register_partner(struct anx7411_data *ctx,
> + int pd, int accessory)
> +{
> + struct typec_partner_desc desc;
> +
> + if (ctx->typec.partner)
> + return 0;
> +
> + desc.usb_pd = pd;
> + desc.accessory = accessory;
> + desc.identity = NULL;
> + ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
> + if (IS_ERR(ctx->typec.partner)) {
> + ctx->typec.partner = NULL;
> + return PTR_ERR(ctx->typec.partner);
> + }
> +
> + return 0;
This function can return an error, yet you never check it at all when
you call it. Why? Don't just throw away errors, they mean something.
thanks,
greg k-h
