[PATCH v4 00/13] Add Mediatek MT6370 PMIC support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>

This patch series add Mediatek MT6370 PMIC support. The MT6370 is a
highly-integrated smart power management IC, which includes a single
cell Li-Ion/Li-Polymer switching battery charger, a USB
Type-C & Power Delivery (PD) controller, dual Flash LED current sources,
a RGB LED driver, a backlight WLED driver, a display bias driver and a
general LDO for portable devices.

In this series of patches, we based on Andy Shevchenko's mfd patch used to
adjust the Makefile order.
(https://lore.kernel.org/all/20220616182524.7956-2-andriy.shevchenko@xxxxxxxxxxxxxxx/)
Among with this, we took some changes for MT6370 and refined the MT6370 device
tree files to comply with DT specifications.

Thank you,
ChiaEn Wu

---
Changes in v4:
- In patch 02/13:
	- Add minItems of "io-channel-names"
	- Replace text "Mediatek" with "MediaTek"

- In patch 06/13:
	- Roll back all "$ref: " to v2 patch style (using
	  "/schemas/...")

- In patch 07/13:
	- Replace text "Mediatek" with "MediaTek" in Kconfig
	- Replace "first break and then return" with "return directly"
	  in
	  "mt6370_check_vendor_info()"
	- Add module name related description in Kconfig helptext
	- Add Copyright in the source code
	- Add header file "mt6370.h" for all "#define IRQ"
	- Adjust Makefile order of MT6370
	- Refine "bank_idx" and "bank_addr" in
	  "mt6375_regmap_read()" / "mt6375_regmap_write()"
	- Refine redundant "else if" in "mt6370_regmap_read()"

- In patch 08/13:
    - Replace text "Mediatek" with "MediaTek" in Kconfig
    - Replace "first ret=regulator_(dis/en)able and then return"
      with "return directly" in "mt6370_tcpc_set_vbus()"
    - Replace header file <linux/of.h> with <linux/mod_devicetable.h>
    - Add Copyright in the source code
    - Add module name related description in Kconfig helptext
    - Remove header file <linux/of.h>
    - Refine all probe error by using dev_err_probe()

- In patch 09/13:
	- Replace text "Mediatek" with "MediaTek"
	- Replace all "first dev_err() and then return" with "return
	  dev_err_probe()"
	- Add Copyright in the source code
	- Add module name related description in Kconfig
	- Add unit suffix of macro "ADC_CONV_POLLING_TIME"
	- Add new macro "ADC_CONV_TIME_MS"
	- Adjust the position of include file <mediatek,mt6370_adc.h>
	- Adjust the postions between <linux/module.h> and
	  <linux/mod_devicetable.h>
	- Fix some incorrect characters

- In patch 10/13:
	- Replace text "Mediatek" with "MediaTek" in Kconfig and
	  MODULE_DESCRIPTION()
	- Replace "mt6370_chg_val_to_reg" and "mt6370_chg_reg_to_val"
	  with
	  "linear_range" API
	- Replace "first break and then return" with "return directly"
	  in all
	  cases of get/set power_supply_property
	- Replace all "first dev_err() and then return" with "return
	  dev_err_probe()"
	- Replace all "return IS_ERR(priv->rdev) ? PTR_ERR(priv->rdev) :
	  0" with
	  "PTR_ERR_OR_ZERO()"
	- Replace "priv->dev->of_node" with "dev_of_node()"
	- Add Copyright in the source code
	- Add module name related description in Kconfig helptext
	- Add proper unit of "MT6370_MIVR_IBUS_TH"
	- Add error check in "mt6370_chg_get_status"
	- Remove including <mediatek,mt6370_adc.h> header file
	- Remove redundant comma of every enum terminator line
	- Remove unwanted blank lines
	- Remove the useless label (toggle_cfo_exit:)
	- Remove using atomic
	- Remove using of_match_ptr()
	- Fix some incorrect characters
	- Fix updating wrong bits when using ena_gpiod of OTG regulator
	- Adjust the probe order in probe()

- In patch 11/13:
	- Replace text "Mediatek" with "MediaTek" in Kconfig
	- Replace text "const" with "constant" in Kconfig
	- Add Copyright in the source code

- In patch 12/13:
	- Replace text "Mediatek" with "MediaTek" in Kconfig
	- Add Copyright in the source code

- In patch 13/13:
	- Replace text "Mediatek" with "MediaTek" in Kconfig
	- Add Copyright in the source code
	- Revise the comment of "PWM HYS STEPS"


Changes in v3:
- Remove ADC ABI file, which is added in v2 Patch 7
- In patch 02/14:
	- Add items and remove maxItems of io-channels
	- Add io-channel-names and describe each item
	- Add "unevaluatedProperties: false" in "usb-otg-vbus-regulator"
	- Rename "enable-gpio" to "enable-gpios" in "usb-otg-vbus-regulator"
- In patch 03/14:
	- Use leds-class-multicolor.yaml instead of common.yaml.
	- Split multi-led and led node.
	- Add subdevice "led" in "multi-led".
- In patch 04/14:
	- Remove the description of enum.
- In patch 05/14:
	- Rename "mediatek,bled-pwm-hys-input-threshold-steps" to
	  "mediatek,bled-pwm-hys-input-th-steps"
	- Refine "bled-pwm-hys-input-th-steps", "bled-ovp-microvolt",
	  "bled-ocp-microamp" enum values
- In patch 06/14:
	- Use " in entire patchset
	- Refine ADC description
	- Rename "enable-gpio" to "enable-gpios" in "regualtor"
- In patch 07/14:
	- Refine Kconfig help text
	- Refine error message of unknown vendor ID in
	  mt6370_check_vendor_info()
	- Refine return value handling of mt6370_regmap_read()
	- Refine all probe error by using dev_err_probe()
	- Refine "bank_idx" and "bank_addr" in mt6370_regmap_read() and
	  mt6370_regmap_write()
	- Add "#define VENID*" and drop the comments in
	  mt6370_check_vendor_info()
	- Drop "MFD" in MODULE_DESCRIPTION()
- In patch 09/14:
	- Refine Kconfig help text
- In patch 10/14:
	- Refine Kconfig help text
	- Refine all channel value in read_scale()
		a. current: uA --> mA
		b. voltage: uV --> mV
		c. temperature: degrees Celsius --> milli degrees Celsius
	- Add "default:" condition of switch statement in read_scale() and read_raw()
	- Add error message for reading ADC register failed
	- Add the comment for adc_lock
	- Add <linux/mod_devicetable.h> header file for struct of_device_id
	- Replace "adc" text with "ADC" in all of the error messages
- In patch 12/14:
	- Refine the grammer of the Kconfig.
	- Change reg mode to the const current mode.
- In patch 14/14:
	- Refine bool properties parsing (pwm-enable, ovp-shutdown, ocp-shutdown) in DT
	  parsing function
	- Refine u32 and u8 properties parsing (pwm-hys-input-th-steps, ovp-microvolt,
	  ocp-microamp), from using register value to using actual value
	- Refine error string of "channle-use" parsing failed
	- Refine Kconfig help text


Changes in v2:
- In patch 01/15:
	- Add "unevaluatedProperties: false".
	- Delete "DT bindings".
	- Refine the description to fit in 80 columns.
	- Skip the connector description.
- In patch 02/15:
	- Refine items description of interrupt-name
	- Rename "usb-otg-vbus" to "usb-otg-vbus-regulator"
	- Add constraint properties for ADC
- In patch 03/15:
	- Skip not useful description of "^(multi-)?led@[0-3]$"
	  and reg.
	- Due to the dependency, remove the mention of mfd
	  document directory.
	- Delete Soft-start property. In design aspect, we think
	  soft-restart should always be enabled, our new chip
	  has deleted the related setting register , also, we don’t
	  allow user adjust this parameter in this chip.
	- Refine the commit message.
- In patch 04/15:
	- Skip not useful description of "^led@[0-1]$" and reg.
	- Add apace after '#'.
	- Refine the commit message.
- In patch 05/15:
	- Remove "binding documentation" in subject title
	- Refine description of mt6370 backlight binding
	  document
	- Refine properties name(bled-pwm-hys-input-bit,
	  bled-ovp-microvolt, bled-ocp-microamp) and their
	  description
- In patch 06/15:
	- Refine ADC and Regulator descriptions
	- Refine include header usage in example
	- Refine node name to generic node name("pmic@34")
	- Refine led example indentation
	- Refine license of mediatek,mt6370_adc.h
	- Rename the dts example from IRQ define to number.
	- Remove mediatek,mt6370.h
- In patch 07/15:
	- Add ABI documentation for mt6370 non-standard ADC
	  sysfs interfaces.
- In patch 08/15:
	- Add all IRQ define into mt6370.c.
	- Refine include header usage
- In patch 09/15:
	- No changes.
- In patch 10/15:
	- Use 'gpiod_get_from_of_node' to replace
	  'fwnode_gpiod_get_index'.
- In patch 11/15:
	- Refine Kconfig mt6370 help text
	- Refine mask&shift to FIELD_PREP()
	- Refine mutex lock name ("lock" -> "adc_lock")
	- Refine mt6370_adc_read_scale()
	- Refine mt6370_adc_read_offset()
	- Refine mt6370_channel_labels[] by using enum to index
	  chan spec
	- Refine MT6370_ADC_CHAN()
	- Refine indio_dev->name
	- Remove useless include header files
- In patch 12/15:
	- Refine mt6370_chg_otg_rdesc.of_match
	  ("mt6370,otg-vbus" -> "usb-otg-vbus-regulator") to match
	  DT binding
- In patch 13/15:
	- Refine Kconfig description.
	- Remove include "linux/of.h" and use
	  "linux/mod_devicetable.h".
	- Place a comma for the last element of the const
	  unsigned int array.
	- Add a comment line for the mutex 'lock'.
	- In probe function, use 'dev_err_probe' in some
	  judgement to reduce the LOC.
	- Refine include header usage.
	  BIT/GENMASK -> linux/bits.h
	  FIELD_GET -> linux/bitfield.h
- In patch 14/15:
	- Add blank line.
	- Replace container_of() with to_mt6370_led() .
	- Refine description of ramping.
	- Refine the mt6370_init_common_properties function.
	- Refine the probe return.
- In patch 15/15:
	- Refine MT6370 help text in Kconfig
	- Refine DT Parse function
	- Remove useless enum
	- Add comment for 6372 backward compatible in
	  bl_update_status() and
	  check_vendor_info()
	- Using dev_err_probe(); insteads dev_err()&return; in
	  the probe()

Alice Chen (2):
  dt-bindings: leds: Add Mediatek MT6370 flashlight
  leds: flashlight: mt6370: Add Mediatek MT6370 flashlight support

ChiYuan Huang (7):
  dt-bindings: usb: Add Mediatek MT6370 TCPC
  dt-bindings: leds: mt6370: Add Mediatek mt6370 current sink type LED
    indicator
  dt-bindings: backlight: Add Mediatek MT6370 backlight
  dt-bindings: mfd: Add Mediatek MT6370
  mfd: mt6370: Add Mediatek MT6370 support
  usb: typec: tcpci_mt6370: Add Mediatek MT6370 tcpci driver
  leds: mt6370: Add Mediatek MT6370 current sink type LED Indicator
    support

ChiaEn Wu (4):
  dt-bindings: power: supply: Add Mediatek MT6370 Charger
  iio: adc: mt6370: Add Mediatek MT6370 support
  power: supply: mt6370: Add Mediatek MT6370 charger driver
  video: backlight: mt6370: Add Mediatek MT6370 support

 .../leds/backlight/mediatek,mt6370-backlight.yaml  |   92 ++
 .../bindings/leds/mediatek,mt6370-flashlight.yaml  |   41 +
 .../bindings/leds/mediatek,mt6370-indicator.yaml   |   77 ++
 .../devicetree/bindings/mfd/mediatek,mt6370.yaml   |  280 ++++++
 .../power/supply/mediatek,mt6370-charger.yaml      |   88 ++
 .../bindings/usb/mediatek,mt6370-tcpc.yaml         |   36 +
 drivers/iio/adc/Kconfig                            |   12 +
 drivers/iio/adc/Makefile                           |    1 +
 drivers/iio/adc/mt6370-adc.c                       |  274 +++++
 drivers/leds/Kconfig                               |   14 +
 drivers/leds/Makefile                              |    1 +
 drivers/leds/flash/Kconfig                         |   12 +
 drivers/leds/flash/Makefile                        |    1 +
 drivers/leds/flash/leds-mt6370-flash.c             |  662 ++++++++++++
 drivers/leds/leds-mt6370.c                         |  994 ++++++++++++++++++
 drivers/mfd/Kconfig                                |   16 +
 drivers/mfd/Makefile                               |    1 +
 drivers/mfd/mt6370.c                               |  289 ++++++
 drivers/mfd/mt6370.h                               |   88 ++
 drivers/power/supply/Kconfig                       |   14 +
 drivers/power/supply/Makefile                      |    1 +
 drivers/power/supply/mt6370-charger.c              | 1062 ++++++++++++++++++++
 drivers/usb/typec/tcpm/Kconfig                     |   11 +
 drivers/usb/typec/tcpm/Makefile                    |    1 +
 drivers/usb/typec/tcpm/tcpci_mt6370.c              |  207 ++++
 drivers/video/backlight/Kconfig                    |   12 +
 drivers/video/backlight/Makefile                   |    1 +
 drivers/video/backlight/mt6370-backlight.c         |  352 +++++++
 include/dt-bindings/iio/adc/mediatek,mt6370_adc.h  |   18 +
 29 files changed, 4658 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/mediatek,mt6370-backlight.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
 create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml
 create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mt6370-tcpc.yaml
 create mode 100644 drivers/iio/adc/mt6370-adc.c
 create mode 100644 drivers/leds/flash/leds-mt6370-flash.c
 create mode 100644 drivers/leds/leds-mt6370.c
 create mode 100644 drivers/mfd/mt6370.c
 create mode 100644 drivers/mfd/mt6370.h
 create mode 100644 drivers/power/supply/mt6370-charger.c
 create mode 100644 drivers/usb/typec/tcpm/tcpci_mt6370.c
 create mode 100644 drivers/video/backlight/mt6370-backlight.c
 create mode 100644 include/dt-bindings/iio/adc/mediatek,mt6370_adc.h

-- 
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux