Re: [PATCH v22 2/3] usb: misc: Add onboard_usb_hub driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Jun 27, 2022 at 12:06:21PM -0700, Matthias Kaehlcke wrote:
> On Mon, Jun 27, 2022 at 02:54:03PM -0400, Alan Stern wrote:
> > On Mon, Jun 27, 2022 at 11:14:47AM -0700, Matthias Kaehlcke wrote:
> > > 
> > >   Further there must be only one platform device for onboard hubs with a
> > >   companion hub (the hub is a single physical device). To achieve this two
> > 
> > What do you mean by "companion hub"?  I think you are using the wrong 
> > word here.  If you're talking about the relation between the two logical 
> > hubs (one attached to the SuperSpeed bus and one attached to the 
> > Low/Full/High-speed bus) within a physical USB-3 hub, the correct term 
> > for this is "peer".  See the existing usages in hub.h, hub.c, and 
> > port.c.
> > 
> > "Companion" refers to something completely different (i.e., the UHCI or 
> > OHCI controllers that handle Low/Full-speed connections on behalf of a 
> > High-speed EHCI controller).
> 
> Yes it's the relation between the two logical hub. The term 'companion-hub'
> stems from the binding and has been around since v6 of this series. I guess
> we should update the binding if the terminology isn't correct.

That sounds like a good idea.

Alan Stern



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux