On Tue, Jun 14, 2022 at 12:16:51PM +0300, Heikki Krogerus wrote:
> On Mon, Jun 13, 2022 at 05:59:56PM +0800, Xin Ji wrote:
> > Add driver for analogix ANX7411 USB Type-C DRP port controller.
> >
> > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > ---
> > V9 -> V10 : Rebase on the latest code
>
> It looks like you did not check the comments I made in v9. Please go
> over those and resend.
Hi Heikki, sorry, I'll check it again.
Thanks,
Xin
>
> thanks,
>
> > V6 -> V7 : Fix Heikki's comment
> > Rebase on Greg's latest usb-next branch
> > Move tcpci.h to include/linux/usb/
> > Remove double definition
> > V5 -> V6 : Fix Heikki's comment
> > V4 -> V5 : Fix Greg h-k comment, remove DEBUG define
> > V3 -> V4 : Fix compiling waring
> > V2 -> V3 : Add changelog history
> > V1 -> V2 : Fix compiling warning issue
> > ---
> > drivers/usb/typec/Kconfig | 11 +
> > drivers/usb/typec/Makefile | 1 +
> > drivers/usb/typec/anx7411.c | 1327 +++++++++++++++++++++++++++++++++++
> > drivers/usb/typec/anx7411.h | 265 +++++++
> > 4 files changed, 1604 insertions(+)
> > create mode 100644 drivers/usb/typec/anx7411.c
> > create mode 100644 drivers/usb/typec/anx7411.h
> >
> > diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
> > index ba24847fb245..5defdfead653 100644
> > --- a/drivers/usb/typec/Kconfig
> > +++ b/drivers/usb/typec/Kconfig
> > @@ -52,6 +52,17 @@ source "drivers/usb/typec/ucsi/Kconfig"
> >
> > source "drivers/usb/typec/tipd/Kconfig"
> >
> > +config TYPEC_ANX7411
> > + tristate "Analogix ANX7411 Type-C DRP Port controller driver"
> > + depends on I2C
> > + depends on USB_ROLE_SWITCH
> > + help
> > + Say Y or M here if your system has Analogix ANX7411 Type-C DRP Port
> > + controller driver.
> > +
> > + If you choose to build this driver as a dynamically linked module, the
> > + module will be called anx7411.ko.
> > +
> > config TYPEC_RT1719
> > tristate "Richtek RT1719 Sink Only Type-C controller driver"
> > depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
> > diff --git a/drivers/usb/typec/Makefile b/drivers/usb/typec/Makefile
> > index 2f174cd3e5df..dac5c11a3234 100644
> > --- a/drivers/usb/typec/Makefile
> > +++ b/drivers/usb/typec/Makefile
> > @@ -6,6 +6,7 @@ obj-$(CONFIG_TYPEC) += altmodes/
> > obj-$(CONFIG_TYPEC_TCPM) += tcpm/
> > obj-$(CONFIG_TYPEC_UCSI) += ucsi/
> > obj-$(CONFIG_TYPEC_TPS6598X) += tipd/
> > +obj-$(CONFIG_TYPEC_ANX7411) += anx7411.o
> > obj-$(CONFIG_TYPEC_HD3SS3220) += hd3ss3220.o
> > obj-$(CONFIG_TYPEC_QCOM_PMIC) += qcom-pmic-typec.o
> > obj-$(CONFIG_TYPEC_STUSB160X) += stusb160x.o
> > diff --git a/drivers/usb/typec/anx7411.c b/drivers/usb/typec/anx7411.c
> > new file mode 100644
> > index 000000000000..cc208cdd8762
> > --- /dev/null
> > +++ b/drivers/usb/typec/anx7411.c
> > @@ -0,0 +1,1327 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +
> > +/*
> > + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> > + *
> > + */
> > +#include <linux/gpio/consumer.h>
> > +#include <linux/i2c.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/iopoll.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/of_graph.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> > +#include <linux/slab.h>
> > +#include <linux/types.h>
> > +#include <linux/usb/pd.h>
> > +#include <linux/usb/role.h>
> > +#include <linux/usb/tcpci.h>
> > +#include <linux/usb/typec.h>
> > +#include <linux/usb/typec_dp.h>
> > +#include <linux/usb/typec_mux.h>
> > +#include <linux/workqueue.h>
> > +#include <linux/power_supply.h>
> > +
> > +#include "anx7411.h"
> > +
> > +static u8 snk_identity[] = {
> > + LOBYTE(VID_ANALOGIX), HIBYTE(VID_ANALOGIX), 0x00, 0x82, /* snk_id_hdr */
> > + 0x00, 0x00, 0x00, 0x00, /* snk_cert */
> > + 0x00, 0x00, LOBYTE(PID_ANALOGIX), HIBYTE(PID_ANALOGIX), /* 5snk_ama */
> > +};
> > +
> > +static u8 dp_caps[4] = {0xC6, 0x00, 0x00, 0x00};
> > +
> > +static int anx7411_reg_read(struct i2c_client *client,
> > + u8 reg_addr)
> > +{
> > + return i2c_smbus_read_byte_data(client, reg_addr);
> > +}
> > +
> > +static int anx7411_reg_block_read(struct i2c_client *client,
> > + u8 reg_addr, u8 len, u8 *buf)
> > +{
> > + return i2c_smbus_read_i2c_block_data(client, reg_addr, len, buf);
> > +}
> > +
> > +static int anx7411_reg_write(struct i2c_client *client,
> > + u8 reg_addr, u8 reg_val)
> > +{
> > + return i2c_smbus_write_byte_data(client, reg_addr, reg_val);
> > +}
> > +
> > +static int anx7411_reg_block_write(struct i2c_client *client,
> > + u8 reg_addr, u8 len, u8 *buf)
> > +{
> > + return i2c_smbus_write_i2c_block_data(client, reg_addr, len, buf);
> > +}
> > +
> > +static struct anx7411_i2c_select anx7411_i2c_addr[] = {
> > + {TCPC_ADDRESS1, SPI_ADDRESS1},
> > + {TCPC_ADDRESS2, SPI_ADDRESS2},
> > + {TCPC_ADDRESS3, SPI_ADDRESS3},
> > + {TCPC_ADDRESS4, SPI_ADDRESS4},
> > +};
> > +
> > +static int anx7411_detect_power_mode(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > + int mode;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ctx->typec.request_current = ret * CURRENT_UNIT; /* 50ma per unit */
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ctx->typec.request_voltage = ret * VOLTAGE_UNIT; /* 100mv per unit */
> > +
> > + if (ctx->psy_online == ANX7411_PSY_OFFLINE) {
> > + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> > + power_supply_changed(ctx->psy);
> > + }
> > +
> > + if (!ctx->typec.cc_orientation_valid)
> > + return 0;
> > +
> > + if (ctx->typec.cc_connect == CC1_CONNECTED)
> > + mode = CC1_RP(ctx->typec.cc_status);
> > + else
> > + mode = CC2_RP(ctx->typec.cc_status);
> > + if (mode) {
> > + typec_set_pwr_opmode(ctx->typec.port, mode - 1);
> > + return 0;
> > + }
> > +
> > + typec_set_pwr_opmode(ctx->typec.port, TYPEC_PWR_MODE_PD);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_partner(struct anx7411_data *ctx,
> > + int pd, int accessory)
> > +{
> > + struct typec_partner_desc desc;
> > +
> > + if (ctx->typec.partner)
> > + return 0;
> > +
> > + desc.usb_pd = pd;
> > + desc.accessory = accessory;
> > + desc.identity = NULL;
> > + ctx->typec.partner = typec_register_partner(ctx->typec.port, &desc);
> > + if (IS_ERR(ctx->typec.partner)) {
> > + ctx->typec.partner = NULL;
> > + return PTR_ERR(ctx->typec.partner);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_detect_cc_orientation(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > + int cc1_rd, cc2_rd;
> > + int cc1_ra, cc2_ra;
> > + int cc1_rp, cc2_rp;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, CC_STATUS);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ctx->typec.cc_status = ret;
> > +
> > + cc1_rd = ret & CC1_RD ? 1 : 0;
> > + cc2_rd = ret & CC2_RD ? 1 : 0;
> > + cc1_ra = ret & CC1_RA ? 1 : 0;
> > + cc2_ra = ret & CC2_RA ? 1 : 0;
> > + cc1_rp = CC1_RP(ret);
> > + cc2_rp = CC2_RP(ret);
> > +
> > + /* Debug cable, nothing to do */
> > + if (cc1_rd && cc2_rd) {
> > + ctx->typec.cc_orientation_valid = 0;
> > + anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_DEBUG);
> > + return 0;
> > + }
> > +
> > + if (cc1_ra && cc2_ra) {
> > + ctx->typec.cc_orientation_valid = 0;
> > + anx7411_register_partner(ctx, 0, TYPEC_ACCESSORY_AUDIO);
> > + return 0;
> > + }
> > +
> > + ctx->typec.cc_orientation_valid = 1;
> > +
> > + anx7411_register_partner(ctx, 1, TYPEC_ACCESSORY_NONE);
> > +
> > + if (cc1_rd || cc1_rp) {
> > + typec_set_orientation(ctx->typec.port,
> > + TYPEC_ORIENTATION_NORMAL);
> > + ctx->typec.cc_connect = CC1_CONNECTED;
> > + }
> > +
> > + if (cc2_rd || cc2_rp) {
> > + typec_set_orientation(ctx->typec.port,
> > + TYPEC_ORIENTATION_REVERSE);
> > + ctx->typec.cc_connect = CC2_CONNECTED;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_set_mux(struct anx7411_data *ctx, int pin_assignment)
> > +{
> > + int mode = TYPEC_STATE_SAFE;
> > +
> > + switch (pin_assignment) {
> > + case SELECT_PIN_ASSIGMENT_U:
> > + /* default 4 line USB 3.1 */
> > + mode = TYPEC_STATE_MODAL;
> > + break;
> > + case SELECT_PIN_ASSIGMENT_C:
> > + case SELECT_PIN_ASSIGMENT_E:
> > + /* 4 line DP */
> > + mode = TYPEC_STATE_SAFE;
> > + break;
> > + case SELECT_PIN_ASSIGMENT_D:
> > + /* 2 line DP, 2 line USB */
> > + mode = TYPEC_MODE_USB3;
> > + break;
> > + default:
> > + mode = TYPEC_STATE_SAFE;
> > + break;
> > + }
> > +
> > + ctx->typec.pin_assignment = pin_assignment;
> > +
> > + return typec_set_mode(ctx->typec.port, mode);
> > +}
> > +
> > +static void anx7411_set_usb_role(struct anx7411_data *ctx, enum usb_role role)
> > +{
> > + if (!ctx->typec.role_sw)
> > + return;
> > +
> > + usb_role_switch_set_role(ctx->typec.role_sw, role);
> > +}
> > +
> > +static int anx7411_data_role_detect(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ctx->typec.data_role = (ret & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
> > + ctx->typec.vconn_role = (ret & VCONN_STATUS) ? TYPEC_SOURCE : TYPEC_SINK;
> > +
> > + typec_set_data_role(ctx->typec.port, ctx->typec.data_role);
> > + typec_set_vconn_role(ctx->typec.port, ctx->typec.vconn_role);
> > +
> > + if (ctx->typec.data_role == TYPEC_HOST)
> > + anx7411_set_usb_role(ctx, USB_ROLE_HOST);
> > + else
> > + anx7411_set_usb_role(ctx, USB_ROLE_DEVICE);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_power_role_detect(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, SYSTEM_STSTUS);
> > + if (ret < 0)
> > + return ret;
> > +
> > + ctx->typec.power_role = (ret & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
> > +
> > + if (ctx->typec.power_role == TYPEC_SOURCE) {
> > + ctx->typec.request_current = DEF_1_5A;
> > + ctx->typec.request_voltage = DEF_5V;
> > + }
> > +
> > + typec_set_pwr_role(ctx->typec.port, ctx->typec.power_role);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_cc_status_detect(struct anx7411_data *ctx)
> > +{
> > + anx7411_detect_cc_orientation(ctx);
> > + anx7411_detect_power_mode(ctx);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_partner_unregister_altmode(struct anx7411_data *ctx)
> > +{
> > + int i;
> > +
> > + ctx->typec.dp_altmode_enter = 0;
> > + ctx->typec.cust_altmode_enter = 0;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++)
> > + if (ctx->typec.amode[i]) {
> > + typec_unregister_altmode(ctx->typec.amode[i]);
> > + ctx->typec.amode[i] = NULL;
> > + }
> > +
> > + ctx->typec.pin_assignment = 0;
> > + return 0;
> > +}
> > +
> > +static int anx7411_typec_register_altmode(struct anx7411_data *ctx,
> > + int svid, int vdo)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct typec_altmode_desc desc;
> > + int i;
> > +
> > + desc.svid = svid;
> > + desc.vdo = vdo;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++)
> > + if (!ctx->typec.amode[i])
> > + break;
> > +
> > + desc.mode = i + 1; /* start with 1 */
> > +
> > + if (i >= MAX_ALTMODE) {
> > + dev_err(dev, "no altmode space for registering\n");
> > + return -ENOMEM;
> > + }
> > +
> > + ctx->typec.amode[i] = typec_partner_register_altmode(ctx->typec.partner,
> > + &desc);
> > + if (IS_ERR(ctx->typec.amode[i])) {
> > + dev_err(dev, "failed to register altmode\n");
> > + ctx->typec.amode[i] = NULL;
> > + return PTR_ERR(ctx->typec.amode);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_unregister_partner(struct anx7411_data *ctx)
> > +{
> > + if (ctx->typec.partner) {
> > + typec_unregister_partner(ctx->typec.partner);
> > + ctx->typec.partner = NULL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_update_altmode(struct anx7411_data *ctx, int svid)
> > +{
> > + int i;
> > +
> > + if (svid == DP_SVID)
> > + ctx->typec.dp_altmode_enter = 1;
> > + else
> > + ctx->typec.cust_altmode_enter = 1;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++) {
> > + if (!ctx->typec.amode[i])
> > + continue;
> > +
> > + if (ctx->typec.amode[i]->svid == svid) {
> > + typec_altmode_update_active(ctx->typec.amode[i], true);
> > + typec_altmode_notify(ctx->typec.amode[i],
> > + ctx->typec.pin_assignment,
> > + &ctx->typec.data);
> > + break;
> > + }
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_altmode(struct anx7411_data *ctx,
> > + bool dp_altmode, u8 *buf)
> > +{
> > + int ret;
> > + int svid;
> > + int mid;
> > +
> > + if (!ctx->typec.partner)
> > + return 0;
> > +
> > + svid = DP_SVID;
> > + if (dp_altmode) {
> > + mid = buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
> > +
> > + return anx7411_typec_register_altmode(ctx, svid, mid);
> > + }
> > +
> > + svid = (buf[3] << 8) | buf[2];
> > + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_ENTER_MODE))
> > + return anx7411_update_altmode(ctx, svid);
> > +
> > + if ((buf[0] & VDM_CMD_AND_ACK_MASK) != (VDM_ACK | VDM_CMD_DIS_MOD))
> > + return 0;
> > +
> > + mid = buf[4] | (buf[5] << 8) | (buf[6] << 16) | (buf[7] << 24);
> > +
> > + ret = anx7411_typec_register_altmode(ctx, svid, mid);
> > + if (ctx->typec.cust_altmode_enter)
> > + ret |= anx7411_update_altmode(ctx, svid);
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_parse_cmd(struct anx7411_data *ctx, u8 type, u8 *buf, u8 len)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + u8 cur_50ma, vol_100mv;
> > +
> > + dev_info(dev, "received message: type:0x%.02x, len:%d, buf[0]:%d\n",
> > + type, len, buf[0]);
> > +
> > + switch (type) {
> > + case TYPE_SRC_CAP:
> > + cur_50ma = anx7411_reg_read(ctx->spi_client, REQUEST_CURRENT);
> > + vol_100mv = anx7411_reg_read(ctx->spi_client, REQUEST_VOLTAGE);
> > + dev_info(dev, "get current(%dma), voltage(%dmv), power(%dmw)\n",
> > + cur_50ma * CURRENT_UNIT, vol_100mv * VOLTAGE_UNIT,
> > + cur_50ma * vol_100mv * 5);
> > +
> > + ctx->typec.request_voltage = vol_100mv * VOLTAGE_UNIT;
> > + ctx->typec.request_current = cur_50ma * CURRENT_UNIT;
> > +
> > + ctx->psy_online = ANX7411_PSY_FIXED_ONLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_PD;
> > + power_supply_changed(ctx->psy);
> > + break;
> > + case TYPE_SNK_CAP:
> > + break;
> > + case TYPE_SVID:
> > + break;
> > + case TYPE_SNK_IDENTITY:
> > + break;
> > + case TYPE_GET_DP_ALT_ENTER:
> > + /* DP alt mode enter success */
> > + if (buf[0])
> > + anx7411_update_altmode(ctx, DP_SVID);
> > + break;
> > + case TYPE_DP_ALT_ENTER:
> > + /* Update DP altmode */
> > + anx7411_update_altmode(ctx, DP_SVID);
> > + break;
> > + case TYPE_OBJ_REQ:
> > + anx7411_detect_power_mode(ctx);
> > + break;
> > + case TYPE_DP_CONFIGURE:
> > + anx7411_set_mux(ctx, buf[1]);
> > + break;
> > + case TYPE_DP_DISCOVER_MODES_INFO:
> > + /* Make sure discover modes valid */
> > + if (buf[0] | buf[1])
> > + /* Register DP Altmode */
> > + anx7411_register_altmode(ctx, 1, buf);
> > + break;
> > + case TYPE_VDM:
> > + /* Register other altmode */
> > + anx7411_register_altmode(ctx, 0, buf);
> > + break;
> > + default:
> > + dev_err(dev, "ignore message(0x%.02x).\n", type);
> > + break;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static u8 checksum(struct device *dev, u8 *buf, u8 len)
> > +{
> > + u8 ret = 0;
> > + u8 i;
> > +
> > + for (i = 0; i < len; i++)
> > + ret += buf[i];
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_read_msg_ctrl_status(struct i2c_client *client)
> > +{
> > + return anx7411_reg_read(client, CMD_SEND_BUF);
> > +}
> > +
> > +static int anx7411_wait_msg_empty(struct i2c_client *client)
> > +{
> > + int val;
> > +
> > + return readx_poll_timeout(anx7411_read_msg_ctrl_status,
> > + client, val, (val < 0) || (val == 0),
> > + 2000, 2000 * 150);
> > +}
> > +
> > +static int anx7411_send_msg(struct anx7411_data *ctx, u8 type, u8 *buf, u8 size)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + u8 msg[MSG_LEN];
> > + u8 crc;
> > + int ret;
> > +
> > + if (size)
> > + memcpy(&msg[MSG_RAWDATA], buf, size);
> > + msg[MSG_TYPE] = type;
> > + msg[MSG_HEADER] = size + 1;
> > +
> > + crc = checksum(dev, msg, size + HEADER_LEN);
> > + msg[size + HEADER_LEN] = 0 - crc;
> > +
> > + ret = anx7411_wait_msg_empty(ctx->spi_client);
> > + if (ret)
> > + return ret;
> > +
> > + anx7411_reg_block_write(ctx->spi_client,
> > + CMD_SEND_BUF + 1, size + HEADER_LEN,
> > + &msg[MSG_TYPE]);
> > + return anx7411_reg_write(ctx->spi_client, CMD_SEND_BUF,
> > + msg[MSG_HEADER]);
> > +}
> > +
> > +static int anx7411_process_cmd(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + u8 msg[MSG_LEN];
> > + u8 len;
> > + u8 crc;
> > +
> > + /* Read message from firmware */
> > + anx7411_reg_block_read(ctx->spi_client, CMD_RECV_BUF, MSG_LEN, msg);
> > + anx7411_reg_write(ctx->spi_client, CMD_RECV_BUF, 0);
> > +
> > + if (!msg[MSG_HEADER])
> > + return 0;
> > +
> > + len = msg[MSG_HEADER] & MSG_LEN_MASK;
> > + crc = checksum(dev, msg, len + HEADER_LEN);
> > + if (crc) {
> > + dev_err(dev, "message error crc(0x%.02x)\n", crc);
> > + return -ERANGE;
> > + }
> > +
> > + return anx7411_parse_cmd(ctx, msg[MSG_TYPE],
> > + &msg[MSG_RAWDATA], len - 1);
> > +}
> > +
> > +static void anx7411_translate_payload(struct device *dev, __le32 *payload,
> > + u32 *pdo, int nr, const char *type)
> > +{
> > + int i;
> > +
> > + if (nr > PDO_MAX_OBJECTS) {
> > + dev_err(dev, "nr(%d) exceed PDO_MAX_OBJECTS(%d)\n",
> > + nr, PDO_MAX_OBJECTS);
> > +
> > + return;
> > + }
> > +
> > + for (i = 0; i < nr; i++)
> > + payload[i] = cpu_to_le32(pdo[i]);
> > +}
> > +
> > +static void anx7411_config(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->spi_client->dev;
> > + struct typec_params *typecp = &ctx->typec;
> > + __le32 payload[PDO_MAX_OBJECTS];
> > +
> > + /* Config PD FW work under PD 2.0 */
> > + anx7411_reg_write(ctx->spi_client, PD_REV_INIT, PD_REV20);
> > + anx7411_reg_write(ctx->tcpc_client, FW_CTRL_0,
> > + UNSTRUCT_VDM_EN | DELAY_200MS |
> > + VSAFE1 | FRS_EN);
> > + anx7411_reg_write(ctx->spi_client, FW_CTRL_1,
> > + AUTO_PD_EN | FORCE_SEND_RDO);
> > +
> > + /* Set VBUS current threshold */
> > + anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_H, 0xff);
> > + anx7411_reg_write(ctx->tcpc_client, VBUS_THRESHOLD_L, 0x03);
> > +
> > + /* Fix dongle compatible issue */
> > + anx7411_reg_write(ctx->tcpc_client, FW_PARAM,
> > + anx7411_reg_read(ctx->tcpc_client, FW_PARAM) |
> > + DONGLE_IOP);
> > + anx7411_reg_write(ctx->spi_client, INT_MASK, 0);
> > +
> > + anx7411_reg_write(ctx->spi_client, PD_EXT_MSG_CTRL, 0xFF);
> > +
> > + if (typecp->caps_flags & HAS_SOURCE_CAP) {
> > + anx7411_translate_payload(dev, payload, typecp->src_pdo,
> > + typecp->src_pdo_nr, "source");
> > + anx7411_send_msg(ctx, TYPE_SRC_CAP, (u8 *)&payload,
> > + typecp->src_pdo_nr * 4);
> > + anx7411_send_msg(ctx, TYPE_SNK_IDENTITY, snk_identity,
> > + sizeof(snk_identity));
> > + anx7411_send_msg(ctx, TYPE_SET_SNK_DP_CAP, dp_caps,
> > + sizeof(dp_caps));
> > + }
> > +
> > + if (typecp->caps_flags & HAS_SINK_CAP) {
> > + anx7411_translate_payload(dev, payload, typecp->sink_pdo,
> > + typecp->sink_pdo_nr, "sink");
> > + anx7411_send_msg(ctx, TYPE_SNK_CAP, (u8 *)&payload,
> > + typecp->sink_pdo_nr * 4);
> > + }
> > +
> > + if (typecp->caps_flags & HAS_SINK_WATT) {
> > + if (typecp->sink_watt) {
> > + anx7411_reg_write(ctx->spi_client, MAX_POWER,
> > + typecp->sink_watt);
> > + /* Set min power to 1W */
> > + anx7411_reg_write(ctx->spi_client, MIN_POWER, 2);
> > + }
> > +
> > + if (typecp->sink_voltage)
> > + anx7411_reg_write(ctx->spi_client, MAX_VOLTAGE,
> > + typecp->sink_voltage);
> > + }
> > +
> > + if (!typecp->caps_flags)
> > + usleep_range(5000, 6000);
> > +
> > + ctx->fw_version = anx7411_reg_read(ctx->spi_client, FW_VER);
> > + ctx->fw_subversion = anx7411_reg_read(ctx->spi_client,
> > + FW_SUBVER);
> > +}
> > +
> > +static void anx7411_chip_standby(struct anx7411_data *ctx)
> > +{
> > + anx7411_reg_write(ctx->spi_client, OCM_CTRL_0,
> > + anx7411_reg_read(ctx->spi_client, OCM_CTRL_0) |
> > + OCM_RESET);
> > + anx7411_reg_write(ctx->tcpc_client, ANALOG_CTRL_10, 0x80);
> > + /* Set TCPC to RD and DRP enable */
> > + anx7411_reg_write(ctx->tcpc_client,
> > + TCPC_ROLE_CTRL,
> > + TCPC_ROLE_CTRL_DRP |
> > + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC1_SHIFT) |
> > + (TCPC_ROLE_CTRL_CC_RD << TCPC_ROLE_CTRL_CC2_SHIFT));
> > +
> > + /* Send DRP toggle command */
> > + anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND,
> > + TCPC_CMD_LOOK4CONNECTION);
> > +
> > + /* Send TCPC enter standby command */
> > + anx7411_reg_write(ctx->tcpc_client, TCPC_COMMAND, TCPC_CMD_I2C_IDLE);
> > +}
> > +
> > +static void anx7411_work_func(struct work_struct *work)
> > +{
> > + int ret;
> > + u8 buf[STATUS_LEN];
> > + u8 int_change; /* Interrupt change */
> > + u8 int_status; /* Firmware status update */
> > + u8 alert0, alert1; /* Interrupt alert source */
> > + struct anx7411_data *ctx = container_of(work, struct anx7411_data, work);
> > +
> > + mutex_lock(&ctx->lock);
> > +
> > + /* Read interrupt change status */
> > + ret = anx7411_reg_block_read(ctx->spi_client, INT_STS, STATUS_LEN, buf);
> > + if (ret < 0) {
> > + /* Power standby mode, just return */
> > + goto unlock;
> > + }
> > + int_change = buf[0];
> > + int_status = buf[1];
> > +
> > + /* Read alert register */
> > + ret = anx7411_reg_block_read(ctx->tcpc_client, ALERT_0, STATUS_LEN, buf);
> > + if (ret < 0)
> > + goto unlock;
> > +
> > + alert0 = buf[0];
> > + alert1 = buf[1];
> > +
> > + /* Clear interrupt and alert status */
> > + anx7411_reg_write(ctx->spi_client, INT_STS, 0);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_0, alert0);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_1, alert1);
> > +
> > + if (alert1 & INTP_POW_OFF) {
> > + anx7411_partner_unregister_altmode(ctx);
> > + anx7411_set_usb_role(ctx, USB_ROLE_NONE);
> > + anx7411_unregister_partner(ctx);
> > + ctx->psy_online = ANX7411_PSY_OFFLINE;
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
> > + ctx->typec.request_voltage = 0;
> > + ctx->typec.request_current = 0;
> > + power_supply_changed(ctx->psy);
> > + anx7411_chip_standby(ctx);
> > + goto unlock;
> > + }
> > +
> > + if ((alert0 & SOFTWARE_INT) && (int_change & OCM_BOOT_UP)) {
> > + anx7411_config(ctx);
> > + anx7411_data_role_detect(ctx);
> > + anx7411_power_role_detect(ctx);
> > + anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
> > + }
> > +
> > + if (alert0 & RECEIVED_MSG)
> > + anx7411_process_cmd(ctx);
> > +
> > + ret = (int_status & DATA_ROLE) ? TYPEC_HOST : TYPEC_DEVICE;
> > + if (ctx->typec.data_role != ret)
> > + anx7411_data_role_detect(ctx);
> > +
> > + ret = (int_status & SINK_STATUS) ? TYPEC_SINK : TYPEC_SOURCE;
> > + if (ctx->typec.power_role != ret)
> > + anx7411_power_role_detect(ctx);
> > +
> > + if ((alert0 & SOFTWARE_INT) && (int_change & CC_STATUS_CHANGE))
> > + anx7411_cc_status_detect(ctx);
> > +
> > +unlock:
> > + mutex_unlock(&ctx->lock);
> > +}
> > +
> > +static irqreturn_t anx7411_intr_isr(int irq, void *data)
> > +{
> > + struct anx7411_data *ctx = (struct anx7411_data *)data;
> > +
> > + queue_work(ctx->workqueue, &ctx->work);
> > +
> > + return IRQ_HANDLED;
> > +}
> > +
> > +static int anx7411_register_i2c_dummy_clients(struct anx7411_data *ctx,
> > + struct i2c_client *client)
> > +{
> > + int i;
> > + u8 spi_addr;
> > +
> > + for (i = 0; i < sizeof(anx7411_i2c_addr); i++) {
> > + if (client->addr == (anx7411_i2c_addr[i].tcpc_address >> 1)) {
> > + spi_addr = anx7411_i2c_addr[i].spi_address >> 1;
> > + ctx->spi_client = i2c_new_dummy_device(client->adapter,
> > + spi_addr);
> > + if (ctx->spi_client)
> > + return 0;
> > + }
> > + }
> > +
> > + dev_err(&client->dev, "unable to get SPI slave\n");
> > + return -ENOMEM;
> > +}
> > +
> > +static void anx7411_port_unregister_altmodes(struct typec_altmode **adev)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < MAX_ALTMODE; i++)
> > + if (adev[i]) {
> > + typec_unregister_altmode(adev[i]);
> > + adev[i] = NULL;
> > + }
> > +}
> > +
> > +static int anx7411_usb_mux_set(struct typec_mux_dev *mux,
> > + struct typec_mux_state *state)
> > +{
> > + struct anx7411_data *ctx = typec_mux_get_drvdata(mux);
> > + struct device *dev = &ctx->spi_client->dev;
> > + int has_dp;
> > +
> > + has_dp = (state->alt && state->alt->svid == USB_TYPEC_DP_SID &&
> > + state->alt->mode == USB_TYPEC_DP_MODE);
> > + if (!has_dp)
> > + dev_err(dev, "dp altmode not register\n");
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_usb_set_orientation(struct typec_switch_dev *sw,
> > + enum typec_orientation orientation)
> > +{
> > + /* No need set */
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_switch(struct anx7411_data *ctx,
> > + struct device *dev,
> > + struct fwnode_handle *fwnode)
> > +{
> > + struct typec_switch_desc sw_desc = { };
> > +
> > + sw_desc.fwnode = fwnode;
> > + sw_desc.drvdata = ctx;
> > + sw_desc.name = fwnode_get_name(fwnode);
> > + sw_desc.set = anx7411_usb_set_orientation;
> > +
> > + ctx->typec.typec_switch = typec_switch_register(dev, &sw_desc);
> > + if (IS_ERR(ctx->typec.typec_switch)) {
> > + dev_err(dev, "switch register failed\n");
> > + return PTR_ERR(ctx->typec.typec_switch);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_register_mux(struct anx7411_data *ctx,
> > + struct device *dev,
> > + struct fwnode_handle *fwnode)
> > +{
> > + struct typec_mux_desc mux_desc = { };
> > +
> > + mux_desc.fwnode = fwnode;
> > + mux_desc.drvdata = ctx;
> > + mux_desc.name = fwnode_get_name(fwnode);
> > + mux_desc.set = anx7411_usb_mux_set;
> > +
> > + ctx->typec.typec_mux = typec_mux_register(dev, &mux_desc);
> > + if (IS_ERR(ctx->typec.typec_mux)) {
> > + dev_err(dev, "mux register failed\n");
> > + return PTR_ERR(ctx->typec.typec_mux);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static void anx7411_unregister_mux(struct anx7411_data *ctx)
> > +{
> > + if (ctx->typec.typec_mux) {
> > + typec_mux_unregister(ctx->typec.typec_mux);
> > + ctx->typec.typec_mux = NULL;
> > + }
> > +}
> > +
> > +static void anx7411_unregister_switch(struct anx7411_data *ctx)
> > +{
> > + if (ctx->typec.typec_switch) {
> > + typec_switch_unregister(ctx->typec.typec_switch);
> > + ctx->typec.typec_switch = NULL;
> > + }
> > +}
> > +
> > +static int anx7411_typec_switch_probe(struct anx7411_data *ctx,
> > + struct device *dev)
> > +{
> > + int ret;
> > + struct device_node *node;
> > +
> > + node = of_find_node_by_name(dev->of_node, "orientation_switch");
> > + if (!node) {
> > + dev_info(dev, "no typec switch exist\n");
> > + return 0;
> > + }
> > +
> > + ret = anx7411_register_switch(ctx, dev, &node->fwnode);
> > + if (ret) {
> > + dev_err(dev, "failed register switch");
> > + return ret;
> > + }
> > +
> > + node = of_find_node_by_name(dev->of_node, "mode_switch");
> > + if (!node) {
> > + dev_err(dev, "no typec mux exist");
> > + ret = -ENODEV;
> > + goto unregister_switch;
> > + }
> > +
> > + ret = anx7411_register_mux(ctx, dev, &node->fwnode);
> > + if (ret) {
> > + dev_err(dev, "failed register mode switch");
> > + ret = -ENODEV;
> > + goto unregister_switch;
> > + }
> > +
> > + return 0;
> > +
> > +unregister_switch:
> > + anx7411_unregister_switch(ctx);
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_typec_port_probe(struct anx7411_data *ctx,
> > + struct device *dev)
> > +{
> > + struct typec_capability *cap = &ctx->typec.caps;
> > + struct typec_params *typecp = &ctx->typec;
> > + struct fwnode_handle *fwnode;
> > + const char *buf;
> > + int ret, i;
> > +
> > + fwnode = device_get_named_child_node(dev, "connector");
> > + if (!fwnode)
> > + return -EINVAL;
> > +
> > + ret = fwnode_property_read_string(fwnode, "power-role", &buf);
> > + if (ret) {
> > + dev_err(dev, "power-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_port_power_role(buf);
> > + if (ret < 0)
> > + return ret;
> > + cap->type = ret;
> > +
> > + ret = fwnode_property_read_string(fwnode, "data-role", &buf);
> > + if (ret) {
> > + dev_err(dev, "data-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_port_data_role(buf);
> > + if (ret < 0)
> > + return ret;
> > + cap->data = ret;
> > +
> > + ret = fwnode_property_read_string(fwnode, "try-power-role", &buf);
> > + if (ret) {
> > + dev_err(dev, "try-power-role not found: %d\n", ret);
> > + return ret;
> > + }
> > +
> > + ret = typec_find_power_role(buf);
> > + if (ret < 0)
> > + return ret;
> > + cap->prefer_role = ret;
> > +
> > + /* Get source pdos */
> > + ret = fwnode_property_count_u32(fwnode, "source-pdos");
> > + if (ret > 0) {
> > + dev_info(dev, "%d source-pdos found\n", ret);
> > + typecp->src_pdo_nr = min(ret, PDO_MAX_OBJECTS);
> > + ret = fwnode_property_read_u32_array(fwnode, "source-pdos",
> > + typecp->src_pdo,
> > + typecp->src_pdo_nr);
> > + if (ret < 0) {
> > + dev_err(dev, "source cap validate failed: %d\n", ret);
> > + return -EINVAL;
> > + }
> > +
> > + typecp->caps_flags |= HAS_SOURCE_CAP;
> > + }
> > +
> > + ret = fwnode_property_count_u32(fwnode, "sink-pdos");
> > + if (ret > 0) {
> > + dev_info(dev, "%d sink-pdos found\n", ret);
> > + typecp->sink_pdo_nr = min(ret, PDO_MAX_OBJECTS);
> > + ret = fwnode_property_read_u32_array(fwnode, "sink-pdos",
> > + typecp->sink_pdo,
> > + typecp->sink_pdo_nr);
> > + if (ret < 0) {
> > + dev_err(dev, "sink cap validate failed: %d\n", ret);
> > + return -EINVAL;
> > + }
> > +
> > + for (i = 0; i < typecp->sink_pdo_nr; i++) {
> > + ret = 0;
> > + switch (pdo_type(typecp->sink_pdo[i])) {
> > + case PDO_TYPE_FIXED:
> > + ret = pdo_fixed_voltage(typecp->sink_pdo[i]);
> > + break;
> > + case PDO_TYPE_BATT:
> > + case PDO_TYPE_VAR:
> > + ret = pdo_max_voltage(typecp->sink_pdo[i]);
> > + break;
> > + case PDO_TYPE_APDO:
> > + default:
> > + ret = 0;
> > + break;
> > + }
> > +
> > + /* 100mv per unit */
> > + typecp->sink_voltage = max(5000, ret) / 100;
> > + }
> > +
> > + typecp->caps_flags |= HAS_SINK_CAP;
> > + }
> > +
> > + if (!fwnode_property_read_u32(fwnode, "op-sink-microwatt", &ret)) {
> > + dev_info(dev, "%d sink-microwat found\n", ret);
> > + typecp->sink_watt = ret / 500000; /* 500mw per unit */
> > + typecp->caps_flags |= HAS_SINK_WATT;
> > + }
> > +
> > + cap->fwnode = fwnode;
> > +
> > + ctx->typec.role_sw = usb_role_switch_get(dev);
> > + if (IS_ERR(ctx->typec.role_sw)) {
> > + dev_err(dev, "USB role switch not found.\n");
> > + ctx->typec.role_sw = NULL;
> > + }
> > +
> > + ctx->typec.port = typec_register_port(dev, cap);
> > + if (IS_ERR(ctx->typec.port)) {
> > + ret = PTR_ERR(ctx->typec.port);
> > + ctx->typec.port = NULL;
> > + dev_err(dev, "Failed to register type c port %d\n", ret);
> > + return ret;
> > + }
> > +
> > + typec_port_register_altmodes(ctx->typec.port, NULL, ctx,
> > + ctx->typec.port_amode,
> > + MAX_ALTMODE);
> > +
> > + return 0;
> > +}
> > +
> > +static int anx7411_typec_check_connection(struct anx7411_data *ctx)
> > +{
> > + int ret;
> > +
> > + ret = anx7411_reg_read(ctx->spi_client, FW_VER);
> > + if (ret < 0)
> > + return 0; /* No device attached in typec port */
> > +
> > + /* Clear interrupt and alert status */
> > + anx7411_reg_write(ctx->spi_client, INT_STS, 0);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_0, 0xFF);
> > + anx7411_reg_write(ctx->tcpc_client, ALERT_1, 0xFF);
> > +
> > + anx7411_cc_status_detect(ctx);
> > + anx7411_power_role_detect(ctx);
> > + anx7411_data_role_detect(ctx);
> > + anx7411_set_mux(ctx, SELECT_PIN_ASSIGMENT_C);
> > +
> > + anx7411_send_msg(ctx, TYPE_GET_DP_ALT_ENTER, NULL, 0);
> > + anx7411_send_msg(ctx, TYPE_GET_DP_DISCOVER_MODES_INFO, NULL, 0);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused anx7411_runtime_pm_suspend(struct device *dev)
> > +{
> > + struct anx7411_data *ctx = dev_get_drvdata(dev);
> > +
> > + mutex_lock(&ctx->lock);
> > +
> > + anx7411_partner_unregister_altmode(ctx);
> > +
> > + if (ctx->typec.partner)
> > + anx7411_unregister_partner(ctx);
> > +
> > + mutex_unlock(&ctx->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static int __maybe_unused anx7411_runtime_pm_resume(struct device *dev)
> > +{
> > + struct anx7411_data *ctx = dev_get_drvdata(dev);
> > +
> > + mutex_lock(&ctx->lock);
> > + /* Detect PD connection */
> > + anx7411_typec_check_connection(ctx);
> > +
> > + mutex_unlock(&ctx->lock);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct dev_pm_ops anx7411_pm_ops = {
> > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> > + pm_runtime_force_resume)
> > + SET_RUNTIME_PM_OPS(anx7411_runtime_pm_suspend,
> > + anx7411_runtime_pm_resume, NULL)
> > +};
> > +
> > +static void anx7411_get_gpio_irq(struct anx7411_data *ctx)
> > +{
> > + struct device *dev = &ctx->tcpc_client->dev;
> > +
> > + ctx->intp_gpiod = devm_gpiod_get_optional(dev, "interrupt", GPIOD_IN);
> > + if (!ctx->intp_gpiod) {
> > + dev_err(dev, "no interrupt gpio property\n");
> > + return;
> > + }
> > +
> > + ctx->intp_irq = gpiod_to_irq(ctx->intp_gpiod);
> > + dev_info(dev, "request gpio(%d) irq(%d)\n",
> > + desc_to_gpio(ctx->intp_gpiod), ctx->intp_irq);
> > +
> > + if (!ctx->intp_irq)
> > + dev_err(dev, "failed to get GPIO IRQ\n");
> > +}
> > +
> > +static const char *anx7411_psy_name_prefix = "anx7411-source-psy-";
> > +
> > +static enum power_supply_usb_type anx7411_psy_usb_types[] = {
> > + POWER_SUPPLY_USB_TYPE_C,
> > + POWER_SUPPLY_USB_TYPE_PD,
> > + POWER_SUPPLY_USB_TYPE_PD_PPS,
> > +};
> > +
> > +static enum power_supply_property anx7411_psy_props[] = {
> > + POWER_SUPPLY_PROP_USB_TYPE,
> > + POWER_SUPPLY_PROP_ONLINE,
> > + POWER_SUPPLY_PROP_VOLTAGE_MIN,
> > + POWER_SUPPLY_PROP_VOLTAGE_MAX,
> > + POWER_SUPPLY_PROP_VOLTAGE_NOW,
> > + POWER_SUPPLY_PROP_CURRENT_MAX,
> > + POWER_SUPPLY_PROP_CURRENT_NOW,
> > +};
> > +
> > +static int anx7411_psy_set_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + const union power_supply_propval *val)
> > +{
> > + struct anx7411_data *ctx = power_supply_get_drvdata(psy);
> > + int ret = 0;
> > +
> > + if (psp == POWER_SUPPLY_PROP_ONLINE)
> > + ctx->psy_online = val->intval;
> > + else
> > + ret = -EINVAL;
> > +
> > + power_supply_changed(ctx->psy);
> > + return ret;
> > +}
> > +
> > +static int anx7411_psy_prop_writeable(struct power_supply *psy,
> > + enum power_supply_property psp)
> > +{
> > + return psp == POWER_SUPPLY_PROP_ONLINE;
> > +}
> > +
> > +static int anx7411_psy_get_prop(struct power_supply *psy,
> > + enum power_supply_property psp,
> > + union power_supply_propval *val)
> > +{
> > + struct anx7411_data *ctx = power_supply_get_drvdata(psy);
> > + int ret = 0;
> > +
> > + switch (psp) {
> > + case POWER_SUPPLY_PROP_USB_TYPE:
> > + val->intval = ctx->usb_type;
> > + break;
> > + case POWER_SUPPLY_PROP_ONLINE:
> > + val->intval = ctx->psy_online;
> > + break;
> > + case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> > + case POWER_SUPPLY_PROP_VOLTAGE_MIN:
> > + case POWER_SUPPLY_PROP_VOLTAGE_MAX:
> > + val->intval = (ctx->psy_online) ?
> > + ctx->typec.request_voltage * 1000 : 0;
> > + break;
> > + case POWER_SUPPLY_PROP_CURRENT_NOW:
> > + case POWER_SUPPLY_PROP_CURRENT_MAX:
> > + val->intval = (ctx->psy_online) ?
> > + ctx->typec.request_current * 1000 : 0;
> > + break;
> > + default:
> > + ret = -EINVAL;
> > + break;
> > + }
> > + return ret;
> > +}
> > +
> > +static int anx7411_psy_register(struct anx7411_data *ctx)
> > +{
> > + struct power_supply_config psy_cfg = {};
> > + const char *port_dev_name = dev_name(ctx->dev);
> > + size_t psy_name_len = strlen(anx7411_psy_name_prefix) +
> > + strlen(port_dev_name) + 1;
> > + char *psy_name;
> > + struct power_supply_desc *psy_desc = &ctx->psy_desc;
> > +
> > + psy_cfg.drv_data = ctx;
> > + psy_cfg.fwnode = dev_fwnode(ctx->dev);
> > + psy_name = devm_kzalloc(ctx->dev, psy_name_len, GFP_KERNEL);
> > + if (!psy_name) {
> > + dev_warn(ctx->dev, "unable to alloc psy memory\n");
> > + return -ENOMEM;
> > + }
> > +
> > + snprintf(psy_name, psy_name_len, "%s%s", anx7411_psy_name_prefix,
> > + port_dev_name);
> > +
> > + psy_desc->name = psy_name;
> > + psy_desc->type = POWER_SUPPLY_TYPE_USB;
> > + psy_desc->usb_types = anx7411_psy_usb_types;
> > + psy_desc->num_usb_types = ARRAY_SIZE(anx7411_psy_usb_types);
> > + psy_desc->properties = anx7411_psy_props,
> > + psy_desc->num_properties = ARRAY_SIZE(anx7411_psy_props),
> > +
> > + psy_desc->get_property = anx7411_psy_get_prop,
> > + psy_desc->set_property = anx7411_psy_set_prop,
> > + psy_desc->property_is_writeable = anx7411_psy_prop_writeable,
> > +
> > + ctx->usb_type = POWER_SUPPLY_USB_TYPE_C;
> > + ctx->psy = devm_power_supply_register(ctx->dev, psy_desc, &psy_cfg);
> > +
> > + if (IS_ERR(ctx->psy))
> > + dev_warn(ctx->dev, "unable to register psy\n");
> > +
> > + return PTR_ERR_OR_ZERO(ctx->psy);
> > +}
> > +
> > +static int anx7411_i2c_probe(struct i2c_client *client,
> > + const struct i2c_device_id *id)
> > +{
> > + struct anx7411_data *plat;
> > + struct device *dev = &client->dev;
> > + int ret;
> > +
> > + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
> > + return -ENODEV;
> > +
> > + plat = devm_kzalloc(dev, sizeof(*plat), GFP_KERNEL);
> > + if (!plat)
> > + return -ENOMEM;
> > +
> > + plat->tcpc_client = client;
> > + i2c_set_clientdata(client, plat);
> > +
> > + mutex_init(&plat->lock);
> > +
> > + ret = anx7411_register_i2c_dummy_clients(plat, client);
> > + if (ret) {
> > + dev_err(dev, "fail to reserve I2C bus\n");
> > + return ret;
> > + }
> > +
> > + ret = anx7411_typec_switch_probe(plat, dev);
> > + if (ret) {
> > + dev_err(dev, "fail to probe typec switch\n");
> > + goto free_i2c_dummy;
> > + }
> > +
> > + ret = anx7411_typec_port_probe(plat, dev);
> > + if (ret) {
> > + dev_err(dev, "fail to probe typec property.\n");
> > + ret = -ENODEV;
> > + goto free_typec_switch;
> > + }
> > +
> > + plat->intp_irq = client->irq;
> > + if (!client->irq) {
> > + dev_warn(dev, "no default interrupt IRQ, probe GPIO interrupt");
> > + anx7411_get_gpio_irq(plat);
> > + }
> > +
> > + if (!plat->intp_irq) {
> > + dev_err(dev, "fail to get interrupt IRQ\n");
> > + goto free_typec_port;
> > + }
> > +
> > + plat->dev = dev;
> > + plat->psy_online = ANX7411_PSY_OFFLINE;
> > + anx7411_psy_register(plat);
> > +
> > + if (plat->intp_irq) {
> > + INIT_WORK(&plat->work, anx7411_work_func);
> > + plat->workqueue = alloc_workqueue("anx7411_work",
> > + WQ_FREEZABLE |
> > + WQ_MEM_RECLAIM,
> > + 1);
> > + if (!plat->workqueue) {
> > + dev_err(dev, "fail to create work queue\n");
> > + ret = -ENOMEM;
> > + goto free_typec_port;
> > + }
> > +
> > + ret = devm_request_threaded_irq(dev, plat->intp_irq,
> > + NULL, anx7411_intr_isr,
> > + IRQF_TRIGGER_FALLING |
> > + IRQF_ONESHOT,
> > + "anx7411-intp", plat);
> > + if (ret) {
> > + dev_err(dev, "fail to request irq\n");
> > + goto free_wq;
> > + }
> > + }
> > +
> > + anx7411_typec_check_connection(plat);
> > +
> > + pm_runtime_enable(dev);
> > +
> > + return 0;
> > +
> > +free_wq:
> > + destroy_workqueue(plat->workqueue);
> > +
> > +free_typec_port:
> > + typec_unregister_port(plat->typec.port);
> > + anx7411_port_unregister_altmodes(plat->typec.port_amode);
> > +
> > +free_typec_switch:
> > + anx7411_unregister_switch(plat);
> > + anx7411_unregister_mux(plat);
> > +
> > +free_i2c_dummy:
> > + i2c_unregister_device(plat->spi_client);
> > +
> > + return ret;
> > +}
> > +
> > +static int anx7411_i2c_remove(struct i2c_client *client)
> > +{
> > + struct anx7411_data *plat = i2c_get_clientdata(client);
> > +
> > + anx7411_partner_unregister_altmode(plat);
> > + anx7411_unregister_partner(plat);
> > +
> > + if (plat->workqueue)
> > + destroy_workqueue(plat->workqueue);
> > +
> > + if (plat->spi_client)
> > + i2c_unregister_device(plat->spi_client);
> > +
> > + if (plat->typec.role_sw)
> > + usb_role_switch_put(plat->typec.role_sw);
> > +
> > + anx7411_unregister_mux(plat);
> > +
> > + anx7411_unregister_switch(plat);
> > +
> > + if (plat->typec.port)
> > + typec_unregister_port(plat->typec.port);
> > +
> > + anx7411_port_unregister_altmodes(plat->typec.port_amode);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct i2c_device_id anx7411_id[] = {
> > + {"anx7411", 0},
> > + {}
> > +};
> > +
> > +MODULE_DEVICE_TABLE(i2c, anx7411_id);
> > +
> > +static const struct of_device_id anx_match_table[] = {
> > + {.compatible = "analogix,anx7411",},
> > + {},
> > +};
> > +
> > +static struct i2c_driver anx7411_driver = {
> > + .driver = {
> > + .name = "anx7411",
> > + .of_match_table = anx_match_table,
> > + .pm = &anx7411_pm_ops,
> > + },
> > + .probe = anx7411_i2c_probe,
> > + .remove = anx7411_i2c_remove,
> > +
> > + .id_table = anx7411_id,
> > +};
> > +
> > +module_i2c_driver(anx7411_driver);
> > +
> > +MODULE_DESCRIPTION("Anx7411 USB Type-C PD driver");
> > +MODULE_AUTHOR("Xin Ji <xji@xxxxxxxxxxxxxxxx>");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_VERSION("0.1.5");
> > diff --git a/drivers/usb/typec/anx7411.h b/drivers/usb/typec/anx7411.h
> > new file mode 100644
> > index 000000000000..09ff80517a5c
> > --- /dev/null
> > +++ b/drivers/usb/typec/anx7411.h
> > @@ -0,0 +1,265 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +
> > +/*
> > + * Copyright(c) 2022, Analogix Semiconductor. All rights reserved.
> > + *
> > + */
> > +
> > +#ifndef __ANX7411_H__
> > +#define __ANX7411_H__
> > +
> > +#define TCPC_ADDRESS1 0x58
> > +#define TCPC_ADDRESS2 0x56
> > +#define TCPC_ADDRESS3 0x54
> > +#define TCPC_ADDRESS4 0x52
> > +#define SPI_ADDRESS1 0x7e
> > +#define SPI_ADDRESS2 0x6e
> > +#define SPI_ADDRESS3 0x64
> > +#define SPI_ADDRESS4 0x62
> > +
> > +struct anx7411_i2c_select {
> > + u8 tcpc_address;
> > + u8 spi_address;
> > +};
> > +
> > +#define VID_ANALOGIX 0x1F29
> > +#define PID_ANALOGIX 0x7411
> > +
> > +/* TCPC register define */
> > +
> > +#define ANALOG_CTRL_10 0xAA
> > +
> > +#define STATUS_LEN 2
> > +#define ALERT_0 0xCB
> > +#define RECEIVED_MSG BIT(7)
> > +#define SOFTWARE_INT BIT(6)
> > +#define MSG_LEN 32
> > +#define HEADER_LEN 2
> > +#define MSG_HEADER 0x00
> > +#define MSG_TYPE 0x01
> > +#define MSG_RAWDATA 0x02
> > +#define MSG_LEN_MASK 0x1F
> > +
> > +#define ALERT_1 0xCC
> > +#define INTP_POW_ON BIT(7)
> > +#define INTP_POW_OFF BIT(6)
> > +
> > +#define VBUS_THRESHOLD_H 0xDD
> > +#define VBUS_THRESHOLD_L 0xDE
> > +
> > +#define FW_CTRL_0 0xF0
> > +#define UNSTRUCT_VDM_EN BIT(0)
> > +#define DELAY_200MS BIT(1)
> > +#define VSAFE0 0
> > +#define VSAFE1 BIT(2)
> > +#define VSAFE2 BIT(3)
> > +#define VSAFE3 (BIT(2) | BIT(3))
> > +#define FRS_EN BIT(7)
> > +
> > +#define FW_PARAM 0xF1
> > +#define DONGLE_IOP BIT(0)
> > +
> > +#define FW_CTRL_2 0xF7
> > +#define SINK_CTRL_DIS_FLAG BIT(5)
> > +
> > +/* SPI register define */
> > +#define OCM_CTRL_0 0x6E
> > +#define OCM_RESET BIT(6)
> > +
> > +#define MAX_VOLTAGE 0xAC
> > +#define MAX_POWER 0xAD
> > +#define MIN_POWER 0xAE
> > +
> > +#define REQUEST_VOLTAGE 0xAF
> > +#define VOLTAGE_UNIT 100 /* mV per unit */
> > +
> > +#define REQUEST_CURRENT 0xB1
> > +#define CURRENT_UNIT 50 /* mA per unit */
> > +
> > +#define CMD_SEND_BUF 0xC0
> > +#define CMD_RECV_BUF 0xE0
> > +
> > +#define REQ_VOL_20V_IN_100MV 0xC8
> > +#define REQ_CUR_2_25A_IN_50MA 0x2D
> > +#define REQ_CUR_3_25A_IN_50MA 0x41
> > +
> > +#define DEF_5V 5000
> > +#define DEF_1_5A 1500
> > +
> > +#define LOBYTE(w) ((u8)(w) & 0xFF)
> > +#define HIBYTE(w) ((u8)(((u16)(w) >> 8) & 0xFF))
> > +
> > +enum anx7411_typec_message_type {
> > + TYPE_SRC_CAP = 0x00,
> > + TYPE_SNK_CAP = 0x01,
> > + TYPE_SNK_IDENTITY = 0x02,
> > + TYPE_SVID = 0x03,
> > + TYPE_SET_SNK_DP_CAP = 0x08,
> > + TYPE_PSWAP_REQ = 0x10,
> > + TYPE_DSWAP_REQ = 0x11,
> > + TYPE_VDM = 0x14,
> > + TYPE_OBJ_REQ = 0x16,
> > + TYPE_DP_ALT_ENTER = 0x19,
> > + TYPE_DP_DISCOVER_MODES_INFO = 0x27,
> > + TYPE_GET_DP_CONFIG = 0x29,
> > + TYPE_DP_CONFIGURE = 0x2A,
> > + TYPE_GET_DP_DISCOVER_MODES_INFO = 0x2E,
> > + TYPE_GET_DP_ALT_ENTER = 0x2F,
> > +};
> > +
> > +#define FW_CTRL_1 0xB2
> > +#define AUTO_PD_EN BIT(1)
> > +#define TRYSRC_EN BIT(2)
> > +#define TRYSNK_EN BIT(3)
> > +#define FORCE_SEND_RDO BIT(6)
> > +
> > +#define FW_VER 0xB4
> > +#define FW_SUBVER 0xB5
> > +
> > +#define INT_MASK 0xB6
> > +#define INT_STS 0xB7
> > +#define OCM_BOOT_UP BIT(0)
> > +#define OC_OV_EVENT BIT(1)
> > +#define VCONN_CHANGE BIT(2)
> > +#define VBUS_CHANGE BIT(3)
> > +#define CC_STATUS_CHANGE BIT(4)
> > +#define DATA_ROLE_CHANGE BIT(5)
> > +#define PR_CONSUMER_GOT_POWER BIT(6)
> > +#define HPD_STATUS_CHANGE BIT(7)
> > +
> > +#define SYSTEM_STSTUS 0xB8
> > +/* 0: SINK off; 1: SINK on */
> > +#define SINK_STATUS BIT(1)
> > +/* 0: VCONN off; 1: VCONN on*/
> > +#define VCONN_STATUS BIT(2)
> > +/* 0: vbus off; 1: vbus on*/
> > +#define VBUS_STATUS BIT(3)
> > +/* 1: host; 0:device*/
> > +#define DATA_ROLE BIT(5)
> > +/* 0: Chunking; 1: Unchunked*/
> > +#define SUPPORT_UNCHUNKING BIT(6)
> > +/* 0: HPD low; 1: HPD high*/
> > +#define HPD_STATUS BIT(7)
> > +
> > +#define DATA_DFP 1
> > +#define DATA_UFP 2
> > +#define POWER_SOURCE 1
> > +#define POWER_SINK 2
> > +
> > +#define CC_STATUS 0xB9
> > +#define CC1_RD BIT(0)
> > +#define CC2_RD BIT(4)
> > +#define CC1_RA BIT(1)
> > +#define CC2_RA BIT(5)
> > +#define CC1_RD BIT(0)
> > +#define CC1_RP(cc) (((cc) >> 2) & 0x03)
> > +#define CC2_RP(cc) (((cc) >> 6) & 0x03)
> > +
> > +#define PD_REV_INIT 0xBA
> > +
> > +#define PD_EXT_MSG_CTRL 0xBB
> > +#define SRC_CAP_EXT_REPLY BIT(0)
> > +#define MANUFACTURER_INFO_REPLY BIT(1)
> > +#define BATTERY_STS_REPLY BIT(2)
> > +#define BATTERY_CAP_REPLY BIT(3)
> > +#define ALERT_REPLY BIT(4)
> > +#define STATUS_REPLY BIT(5)
> > +#define PPS_STATUS_REPLY BIT(6)
> > +#define SNK_CAP_EXT_REPLY BIT(7)
> > +
> > +#define NO_CONNECT 0x00
> > +#define USB3_1_CONNECTED 0x01
> > +#define DP_ALT_4LANES 0x02
> > +#define USB3_1_DP_2LANES 0x03
> > +#define CC1_CONNECTED 0x01
> > +#define CC2_CONNECTED 0x02
> > +#define SELECT_PIN_ASSIGMENT_C 0x04
> > +#define SELECT_PIN_ASSIGMENT_D 0x08
> > +#define SELECT_PIN_ASSIGMENT_E 0x10
> > +#define SELECT_PIN_ASSIGMENT_U 0x00
> > +#define REDRIVER_ADDRESS 0x20
> > +#define REDRIVER_OFFSET 0x00
> > +
> > +#define DP_SVID 0xFF01
> > +#define VDM_ACK 0x40
> > +#define VDM_CMD_RES 0x00
> > +#define VDM_CMD_DIS_ID 0x01
> > +#define VDM_CMD_DIS_SVID 0x02
> > +#define VDM_CMD_DIS_MOD 0x03
> > +#define VDM_CMD_ENTER_MODE 0x04
> > +#define VDM_CMD_EXIT_MODE 0x05
> > +#define VDM_CMD_ATTENTION 0x06
> > +#define VDM_CMD_GET_STS 0x10
> > +#define VDM_CMD_AND_ACK_MASK 0x5F
> > +
> > +#define MAX_ALTMODE 2
> > +
> > +#define HAS_SOURCE_CAP BIT(0)
> > +#define HAS_SINK_CAP BIT(1)
> > +#define HAS_SINK_WATT BIT(2)
> > +
> > +enum anx7411_psy_state {
> > + /* copy from drivers/usb/typec/tcpm */
> > + ANX7411_PSY_OFFLINE = 0,
> > + ANX7411_PSY_FIXED_ONLINE,
> > +
> > + /* private */
> > + /* PD keep in, but disconnct power to bq25700,
> > + * this state can be active when higher capacity adapter plug in,
> > + * and change to ONLINE state when higher capacity adapter plug out
> > + */
> > + ANX7411_PSY_HANG = 0xff,
> > +};
> > +
> > +struct typec_params {
> > + int request_current; /* ma */
> > + int request_voltage; /* mv */
> > + int cc_connect;
> > + int cc_orientation_valid;
> > + int cc_status;
> > + int data_role;
> > + int power_role;
> > + int vconn_role;
> > + int dp_altmode_enter;
> > + int cust_altmode_enter;
> > + struct usb_role_switch *role_sw;
> > + struct typec_port *port;
> > + struct typec_partner *partner;
> > + struct typec_mux_dev *typec_mux;
> > + struct typec_switch_dev *typec_switch;
> > + struct typec_altmode *amode[MAX_ALTMODE];
> > + struct typec_altmode *port_amode[MAX_ALTMODE];
> > + struct typec_displayport_data data;
> > + int pin_assignment;
> > + struct typec_capability caps;
> > + u32 src_pdo[PDO_MAX_OBJECTS];
> > + u32 sink_pdo[PDO_MAX_OBJECTS];
> > + u8 caps_flags;
> > + u8 src_pdo_nr;
> > + u8 sink_pdo_nr;
> > + u8 sink_watt;
> > + u8 sink_voltage;
> > +};
> > +
> > +struct anx7411_data {
> > + int fw_version;
> > + int fw_subversion;
> > + struct i2c_client *tcpc_client;
> > + struct i2c_client *spi_client;
> > + struct gpio_desc *intp_gpiod;
> > + struct fwnode_handle *connector_fwnode;
> > + struct typec_params typec;
> > + int intp_irq;
> > + struct work_struct work;
> > + struct workqueue_struct *workqueue;
> > + /* Lock for interrupt work queue */
> > + struct mutex lock;
> > +
> > + enum anx7411_psy_state psy_online;
> > + enum power_supply_usb_type usb_type;
> > + struct power_supply *psy;
> > + struct power_supply_desc psy_desc;
> > + struct device *dev;
> > +};
> > +
> > +#endif /* __ANX7411_H__ */
> > --
> > 2.25.1
>
> --
> heikki
