This patch adds DT schema documentation for the STM32G0 Type-C controller. STM32G0 provides an integrated USB Type-C and power delivery interface. It can be programmed with a firmware to handle UCSI protocol over I2C interface. A GPIO is used as an interrupt line. It may be used as a wakeup source, so use optional "wakeup-source" and "power-domains" properties to support wakeup. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx> --- .../bindings/usb/st,typec-stm32g0.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml diff --git a/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml new file mode 100644 index 0000000000000..b2729bd015a1a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/st,typec-stm32g0.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/usb/st,typec-stm32g0.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32G0 Type-C controller bindings + +description: | + The STM32G0 MCU can be programmed to control Type-C connector(s) through I2C + typically using the UCSI protocol over I2C, with a dedicated alert + (interrupt) pin. + +maintainers: + - Fabrice Gasnier <fabrice.gasnier@xxxxxxxxxxx> + +properties: + compatible: + const: st,stm32g0-typec + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + connector: + type: object + allOf: + - $ref: ../connector/usb-connector.yaml# + + firmware-name: + description: | + Should contain the name of the default firmware image + file located on the firmware search path + + wakeup-source: true + power-domains: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c5 { + #address-cells = <1>; + #size-cells = <0>; + + stm32g0@53 { + compatible = "st,stm32g0-typec"; + reg = <0x53>; + /* Alert pin on GPIO PE12 */ + interrupts = <12 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpioe>; + + /* Example with one type-C connector */ + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + + port { + con_usb_c_ep: endpoint { + remote-endpoint = <&usbotg_hs_ep>; + }; + }; + }; + }; + }; + + usbotg_hs { + usb-role-switch; + port { + usbotg_hs_ep: endpoint { + remote-endpoint = <&con_usb_c_ep>; + }; + }; + }; +... -- 2.25.1