On 21/6/2022 6:09 pm, Oliver Neukum wrote:
On 21.06.22 02:38, michael.lee@xxxxxxxxx wrote:
Dear Chris,
The below is the reply from Japan.
Dose they do the below commnad after connect B5L to USB?
sudo modprobe usbserial vendor=0x0590 product=0x00ca
sudo chmod o+wr /dev/ttyUSB0
For linux environment ,this commnad is needed to connect B5L to USB.
We preapre the below sh file with c++ sample codes.
connect_tof.sh
https://github.com/omron-devhub/b5l_TOFsensor_Sample_cpp
Hi,
this is not nice. But in any case this thing is not an ACM
device. This patch should remove it from the driver it is
abusing to where it belongs. Could you please test it?
Regards
Oliver
Hi Oliver,
thanks for that patch, I can confirm it works for me. I have the ToF up
and running at B921600 8N1.
But I would wait, not apply to the kernel, because I noticed that the team from
OMRON is working
on the CDC implantation.
So this patch is only a workaround for the moment.
Thank you for your help!
Chris
--
GTSYS Limited RFID Technology
9/F, Unit E, R07, Kwai Shing Industrial Building Phase 2,
42-46 Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong
Tel (852) 9079 9521
Disclaimer: https://www.gtsys.com.hk/email/classified.html
