On Tue, May 31, 2022 at 12:23:01PM +0200, Carlo Lobrano wrote: > Add support for the following Telit LE910Cx composition: > > 0x1250: rmnet, tty, tty, tty, tty > > Signed-off-by: Carlo Lobrano <c.lobrano@xxxxxxxxx> > --- > v3: - fix subject prefix and modem name (s/LN910Cx/LE910Cx) > - more descriptive e-mail content > v2: use RSVD in place of NCTRL for interface 0 (rmnet) Thanks for the update (and thanks for reviewing, Daniele). You forgot to include the lsusb output in v2 and v3 but I found it here: https://lore.kernel.org/r/20220528073445.50066-1-c.lobrano@xxxxxxxxx > drivers/usb/serial/option.c | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c > index 152ad882657d..cd9aa61ec801 100644 > --- a/drivers/usb/serial/option.c > +++ b/drivers/usb/serial/option.c > @@ -1275,6 +1275,8 @@ static const struct usb_device_id option_ids[] = { > .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, > { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1231, 0xff), /* Telit LE910Cx (RNDIS) */ > .driver_info = NCTRL(2) | RSVD(3) }, > + { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1250, 0xff), /* Telit LE910Cx (rmnet) */ > + .driver_info = RSVD(0) }, Looks you can match on the interface SubClass and Protocol using USB_DEVICE_INFO() and avoid using RSVD() here which is preferred when possible. > { USB_DEVICE(TELIT_VENDOR_ID, 0x1260), > .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, > { USB_DEVICE(TELIT_VENDOR_ID, 0x1261), Care to respin a v4? You can keep Daniele's reviewed-by tag when resending (i.e. include it before your SoB). Johan