From: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> [ Upstream commit ace17b6ee4f92ab0375d12a1b42494f8590a96b6 ] The driver shouldn't be able to issue End Transfer to the control endpoint at anytime. Typically we should only do so in error cases such as invalid/unexpected direction of Data Phase as described in the control transfer flow of the programming guide. It _may_ end started data phase during controller deinitialization from soft disconnect or driver removal. However, that should not happen because the driver should be maintained in EP0_SETUP_PHASE during driver tear-down. On soft-connect, the controller should be reset from a soft-reset and there should be no issue starting the control endpoint. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> Link: https://lore.kernel.org/r/3c6643678863a26702e4115e9e19d7d94a30d49c.1650593829.git.Thinh.Nguyen@xxxxxxxxxxxx Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/usb/dwc3/gadget.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 0b9c2493844a..05856bcaf2f7 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3673,6 +3673,17 @@ static void dwc3_reset_gadget(struct dwc3 *dwc) void dwc3_stop_active_transfer(struct dwc3_ep *dep, bool force, bool interrupt) { + struct dwc3 *dwc = dep->dwc; + + /* + * Only issue End Transfer command to the control endpoint of a started + * Data Phase. Typically we should only do so in error cases such as + * invalid/unexpected direction as described in the control transfer + * flow of the programming guide. + */ + if (dep->number <= 1 && dwc->ep0state != EP0_DATA_PHASE) + return; + if (!(dep->flags & DWC3_EP_TRANSFER_STARTED) || (dep->flags & DWC3_EP_DELAY_STOP) || (dep->flags & DWC3_EP_END_TRANSFER_PENDING)) -- 2.35.1
