Hi Krzysztof, Thank you for the valuable suggestion. Sorry for sending the same email again. I forgot to reply to everyone in my last email.. Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 於 2022年6月1日 週三 上午4:15寫道： > > On 31/05/2022 12:42, ChiaEn Wu wrote: > > From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> > > > > Subject - remove "binding documentation". It's already implied by prefix. > > > Add Mediatek MT6370 Charger binding documentation. > > > > Signed-off-by: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> > > --- > > .../power/supply/mediatek,mt6370-charger.yaml | 60 +++++++++++++++++++ > > 1 file changed, 60 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > > > > diff --git a/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > > new file mode 100644 > > index 000000000000..9d5c4487ca9c > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/power/supply/mediatek,mt6370-charger.yaml > > @@ -0,0 +1,60 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/power/supply/mediatek,mt6370-charger.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Mediatek MT6370 Battery Charger > > + > > +maintainers: > > + - ChiaEn Wu <chiaen_wu@xxxxxxxxxxx> > > + > > +description: | > > + This module is part of the MT6370 MFD device. > > + Provides Battery Charger, Boost for OTG devices and BC1.2 detection. > > + > > +properties: > > + compatible: > > + const: mediatek,mt6370-charger > > + > > + interrupts: > > + description: | > > + Specify what irqs are needed to be handled by MT6370 Charger driver. IRQ > > + "MT6370_IRQ_CHG_MIVR", "MT6370_IRQ_ATTACH" and "MT6370_IRQ_OVPCTRL_UVP_D" > > + are required. > > + items: > > + - description: BC1.2 done irq for mt6370 charger > > + - description: usb plug in irq for mt6370 charger > > + - description: mivr irq for mt6370 charger > > s/for mt6370 charger// > in each item I got it, this will be refined in the next version. Thanks! > > > + > > + interrupt-names: > > + items: > > + - const: attach_i > > + - const: uvp_d_evt > > + - const: mivr > > + > > + io-channels: > > + description: | > > + Use ADC channel to read vbus, ibus, ibat, etc., info. Ibus ADC channel > > + is required. > > Constraints (e.g. maxItems) are needed. OK, I will add them in the new version! > > > + > > + usb-otg-vbus: > > Let's keep the same name as in MT6360: > > usb-otg-vbus-regulator I'll change the name to correspond with MT6360 in the next patch, thanks! > > + type: object > > + description: OTG boost regulator. > > + $ref: /schemas/regulator/regulator.yaml# > > + > > + properties: > > + enable-gpio: > > + maxItems: 1 > > + description: | > > + Specify a valid 'enable' gpio for the regulator and it's optional > > This description is pointless - does not bring any more information. You > repeat the schema. Please, avoid such descriptions. I got it, I will remove them in the next patch. > > > + > > +required: > > + - compatible > > + - interrupts > > + - interrupt-names > > + - io-channels > > + > > +additionalProperties: false > > > How about example? Or is it going to be in MFD schema? All of MT6370 binding documentation examples are in the MFD schema! Thanks. > > > Best regards, > Krzysztof Best regards, ChiaEn Wu
