[RFC 0/2] Add support for multiport controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Currently the DWC3 driver supports only single port controller which 
requires at most two PHYs ie HS and SS PHYs. There are SoCs that has
DWC3 controller with multiple ports that can operate in host mode. Some of
the port supports both SS+HS and other port supports only HS mode.

This change refactors the PHY logic to support multiport controller. The 
patches have gone through basic sanity only.

For any multiport controller we would define a new node "multiport" inside
dwc3 and then add subsequent "mport" nodes inside it for individual ports
that it supports. Now each individual "mport" defines the PHYs that it 
supports.

Looking for comments/feedback on the device tree bindings. Once the 
bindings are locked, we can further factor the code.

e.g.
Consider a Dual port controller where each port supports HS+SS 

multiport {
	mp_1: mport@1 {
		usb-phys = <usb2_phy0>, <usb3_phy0>;
	};	
	mp_2: mport@2 {
		usb-phys = <usb2_phy1>, <usb3_phy1>;
	};	
};

Harsh Agarwal (2):
  dt-bindings: usb: dwc3: Add support for multiport related properties
  usb: dwc3: Refactor PHY logic to support Multiport Controller

 .../devicetree/bindings/usb/snps,dwc3.yaml         |  55 +++++
 drivers/usb/dwc3/core.c                            | 259 ++++++++++++++++-----
 drivers/usb/dwc3/core.h                            |   8 +-
 drivers/usb/dwc3/drd.c                             |   8 +-
 drivers/usb/dwc3/gadget.c                          |   4 +-
 5 files changed, 264 insertions(+), 70 deletions(-)

-- 
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux