On Thu, May 19, 2022 at 02:34:43AM +0000, Carl Yin(殷张成) wrote: > The BG95 modem has 3 USB configurations that are configurable via the AT > command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem > enumerate with the following interfaces, respectively: > > "modem": Diag + GNSS + Modem + Modem > "ecm" : Diag + GNSS + Modem + ECM > "rmnet": Diag + GNSS + Modem + QMI > Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE) > > A detailed description of the USB configuration for each mode follows: > Signed-off-by: Carl Yin <carl.yin@xxxxxxxxxxx> > --- > > v3: > 1. use USB_DEVICE_INTERFACE_CLASS instead of USB_DEVICE_AND_INTERFACE_INFO > 2. introduce limitations of QMI in commit message > > v2: > add at+qcfgext="usbnet","rmnet" and RSVD(3) Thanks for the update. Now applied. Johan
