On Mon, 16 May 2022 23:20:08 +0530, Krishna Kurapati wrote: > From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx> > > Add device tree bindings for SNPS phy tuning parameters. > > Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx> > Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx> > --- > .../bindings/phy/qcom,usb-snps-femto-v2.yaml | 105 +++++++++++++++++++++ > 1 file changed, 105 insertions(+) > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-rise-fall-time-bp: 'minimim' is not one of ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'dependentRequired', 'dependentSchemas', 'deprecated', 'description', 'else', 'enum', 'exclusiveMaximum', 'exclusiveMinimum', 'items', 'if', 'minItems', 'minimum', 'maxItems', 'maximum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'required', 'then', 'type', 'typeSize', 'unevaluatedProperties', 'uniqueItems'] from schema $id: http://devicetree.org/meta-schemas/keywords.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: properties:qcom,hs-crossover-voltage-microvolt: '$ref' should not be valid under {'const': '$ref'} hint: Standard unit suffix properties don't need a type $ref from schema $id: http://devicetree.org/meta-schemas/core.yaml# /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.yaml: ignoring, error in schema: properties: qcom,hs-rise-fall-time-bp Documentation/devicetree/bindings/phy/qcom,usb-snps-femto-v2.example.dtb:0:0: /example-0/phy@88e2000: failed to match any schema with compatible: ['qcom,sm8150-usb-hs-phy'] doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
