RE: [PATCH 3/3] dt-bindings: usb: add documentation for aspeed udc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> Sent: Sunday, May 15, 2022 4:22 AM
> To: Neal Liu <neal_liu@xxxxxxxxxxxxxx>; Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Krzysztof
> Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Joel Stanley <joel@xxxxxxxxx>;
> Andrew Jeffery <andrew@xxxxxxxx>; Felipe Balbi <balbi@xxxxxxxxxx>; Sumit
> Semwal <sumit.semwal@xxxxxxxxxx>; Christian König
> <christian.koenig@xxxxxxx>; Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>;
> Li Yang <leoyang.li@xxxxxxx>
> Cc: linux-aspeed@xxxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx;
> dri-devel@xxxxxxxxxxxxxxxxxxxxx; linaro-mm-sig@xxxxxxxxxxxxxxxx; BMC-SW
> <BMC-SW@xxxxxxxxxxxxxx>
> Subject: Re: [PATCH 3/3] dt-bindings: usb: add documentation for aspeed udc
> 
> On 13/05/2022 17:39, Neal Liu wrote:
> >> -----Original Message-----
> >> From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> >> Sent: Friday, May 13, 2022 5:07 PM
> >> To: Neal Liu <neal_liu@xxxxxxxxxxxxxx>; Greg Kroah-Hartman
> >> <gregkh@xxxxxxxxxxxxxxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
> >> Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Joel Stanley
> >> <joel@xxxxxxxxx>; Andrew Jeffery <andrew@xxxxxxxx>; Felipe Balbi
> >> <balbi@xxxxxxxxxx>; Sumit Semwal <sumit.semwal@xxxxxxxxxx>; Christian
> >> König <christian.koenig@xxxxxxx>; Geert Uytterhoeven <geert@linux-
> >> m68k.org>; Li Yang <leoyang.li@xxxxxxx>
> >> Cc: linux-aspeed@xxxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx;
> >> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx;
> >> linux- kernel@xxxxxxxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx; dri-
> >> devel@xxxxxxxxxxxxxxxxxxxxx; linaro-mm-sig@xxxxxxxxxxxxxxxx; BMC-SW
> >> <BMC- SW@xxxxxxxxxxxxxx>
> >> Subject: Re: [PATCH 3/3] dt-bindings: usb: add documentation for
> >> aspeed udc
> >>
> >> On 13/05/2022 08:57, Neal Liu wrote:
> >>> Add device tree binding documentation for the Aspeed USB2.0 Device
> >>> Controller.
> >>>
> >>> Signed-off-by: Neal Liu <neal_liu@xxxxxxxxxxxxxx>
> >>> ---
> >>>  .../devicetree/bindings/usb/aspeed,udc.yaml   | 52
> >> +++++++++++++++++++
> >>>  1 file changed, 52 insertions(+)
> >>>  create mode 100644
> >>> Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> >>
> >> Please name the file as first compatible, so "aspeed,ast2600-udc.yaml"
> >
> > Okay, I could rename it for next patch if you preferred.
> > But there are lots of yaml files which are not named as first compatible.
> 
> Yes, I know, I quite likely I also produced such bindings, but a specific name is
> rather preferred. Otherwise you will have a difficult naming choice when your
> next Aspeed UDC requires new bindings file because of some differences (not
> yet known now).
> 
We can rename the bindings if next Aspeed UDC needs, don't you think?
Currently, Aspeed has no requirement.
> >
> >>
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> >>> b/Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> >>> new file mode 100644
> >>> index 000000000000..d1d2f77d1c54
> >>> --- /dev/null
> >>> +++ b/Documentation/devicetree/bindings/usb/aspeed,udc.yaml
> >>> @@ -0,0 +1,52 @@
> >>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) #
> >>> +Copyright
> >>> +(c) 2020 Facebook Inc.
> >>> +%YAML 1.2
> >>> +---
> >>> +$id: http://devicetree.org/schemas/usb/aspeed,udc.yaml#
> >>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >>> +
> >>> +title: ASPEED USB 2.0 Device Controller
> >>> +
> >>> +maintainers:
> >>> +  - Neal Liu <neal_liu@xxxxxxxxxxxxxx>
> >>> +
> >>> +description: |+
> >>> +  The ASPEED USB 2.0 Device Controller implements 1 control
> >>> +endpoint and
> >>> +  4 generic endpoints for AST260x.
> >>> +
> >>> +  Supports independent DMA channel for each generic endpoint.
> >>> +  Supports 32/256 stages descriptor mode for all generic endpoints.
> >>> +
> >>> +properties:
> >>> +  compatible:
> >>> +    enum:
> >>> +      - aspeed,ast2600-udc
> >>> +
> >>> +  reg:
> >>> +    maxItems: 1
> >>> +
> >>> +  clocks:
> >>> +    maxItems: 1
> >>> +
> >>> +  interrupts:
> >>> +    maxItems: 1
> >>
> >> No child properties? No ports or any other devices? No usb-hcd.yaml?
> >
> > Aspeed udc only has 1 port, no need extra properties for now.
> 
> OK
> 
> >
> >>> +
> >>> +required:
> >>> +  - compatible
> >>> +  - reg
> >>> +  - clocks
> >>> +  - interrupts
> >>> +
> >>> +additionalProperties: false
> >>> +
> >>> +examples:
> >>> +  - |
> >>> +    #include <dt-bindings/clock/aspeed-clock.h>
> >>> +    udc: udc@1e6a2000 {
> >>
> >> Node name: usb
> >
> > "udc" is more recognizable than "usb" I think. "usb" is too general, can be
> various like host or device.
> 
> It's still required by schema for most of USB host controllers. Existing USB
> device controllers use usb as well (except Atmel mentioning gadget) Generic
> name is also expected by Devicetree spec and "udc" is not on a list of
> examples of generic names (usb is).

Okay, I'll revise it for next patch.
Thanks

> 
> 
> Best regards,
> Krzysztof




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux