Cache the interrupt mask to avoid re-reading it from the PHY upon every interrupt. This will simplify a subsequent commit which detects hot-removal in the interrupt handler and bails out. Analyzing and debugging PHY transactions also becomes simpler if such redundant reads are avoided. Last not least, interrupt overhead and latency is slightly improved. Tested-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx> # LAN9514/9512/9500 Tested-by: Ferry Toth <fntoth@xxxxxxxxx> # LAN9514 Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx> --- drivers/net/phy/smsc.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index 92225d0fc246..e0eadea4b4b5 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -44,6 +44,7 @@ static struct smsc_hw_stat smsc_hw_stats[] = { }; struct smsc_phy_priv { + u16 intmask; bool energy_enable; struct clk *refclk; }; @@ -58,7 +59,6 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev) static int smsc_phy_config_intr(struct phy_device *phydev) { struct smsc_phy_priv *priv = phydev->priv; - u16 intmask = 0; int rc; if (phydev->interrupts == PHY_INTERRUPT_ENABLED) { @@ -66,12 +66,15 @@ static int smsc_phy_config_intr(struct phy_device *phydev) if (rc) return rc; - intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6; + priv->intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6; if (priv->energy_enable) - intmask |= MII_LAN83C185_ISF_INT7; - rc = phy_write(phydev, MII_LAN83C185_IM, intmask); + priv->intmask |= MII_LAN83C185_ISF_INT7; + + rc = phy_write(phydev, MII_LAN83C185_IM, priv->intmask); } else { - rc = phy_write(phydev, MII_LAN83C185_IM, intmask); + priv->intmask = 0; + + rc = phy_write(phydev, MII_LAN83C185_IM, 0); if (rc) return rc; @@ -83,13 +86,8 @@ static int smsc_phy_config_intr(struct phy_device *phydev) static irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev) { - int irq_status, irq_enabled; - - irq_enabled = phy_read(phydev, MII_LAN83C185_IM); - if (irq_enabled < 0) { - phy_error(phydev); - return IRQ_NONE; - } + struct smsc_phy_priv *priv = phydev->priv; + int irq_status; irq_status = phy_read(phydev, MII_LAN83C185_ISF); if (irq_status < 0) { @@ -97,7 +95,7 @@ static irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev) return IRQ_NONE; } - if (!(irq_status & irq_enabled)) + if (!(irq_status & priv->intmask)) return IRQ_NONE; phy_trigger_machine(phydev); -- 2.35.2