From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Factoring out parts of xhci_gen_setup() has two motivations:
- When adding functionaliy to omit shared hcd if not needed in a
subsequent patch, we'll have to call xhci_hcd_init_usb3_data()
from two places.
- It reduces size of xhci_gen_setup() and makes it better readable.
Signed-off-by: Heiner Kallweit <hkallweit1@xxxxxxxxx>
Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
---
drivers/usb/host/xhci.c | 104 +++++++++++++++++++++-------------------
1 file changed, 54 insertions(+), 50 deletions(-)
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 25b87e99b4dd..92ae4ec531ff 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5207,6 +5207,57 @@ static int xhci_get_frame(struct usb_hcd *hcd)
return readl(&xhci->run_regs->microframe_index) >> 3;
}
+static void xhci_hcd_init_usb2_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
+{
+ xhci->usb2_rhub.hcd = hcd;
+ hcd->speed = HCD_USB2;
+ hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ /*
+ * USB 2.0 roothub under xHCI has an integrated TT,
+ * (rate matching hub) as opposed to having an OHCI/UHCI
+ * companion controller.
+ */
+ hcd->has_tt = 1;
+}
+
+static void xhci_hcd_init_usb3_data(struct xhci_hcd *xhci, struct usb_hcd *hcd)
+{
+ unsigned int minor_rev;
+
+ /*
+ * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+ * should return 0x31 for sbrn, or that the minor revision
+ * is a two digit BCD containig minor and sub-minor numbers.
+ * This was later clarified in xHCI 1.2.
+ *
+ * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+ * minor revision set to 0x1 instead of 0x10.
+ */
+ if (xhci->usb3_rhub.min_rev == 0x1)
+ minor_rev = 1;
+ else
+ minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+
+ switch (minor_rev) {
+ case 2:
+ hcd->speed = HCD_USB32;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+ hcd->self.root_hub->rx_lanes = 2;
+ hcd->self.root_hub->tx_lanes = 2;
+ hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x2;
+ break;
+ case 1:
+ hcd->speed = HCD_USB31;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
+ hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1;
+ break;
+ }
+ xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
+ minor_rev, minor_rev ? "Enhanced " : "");
+
+ xhci->usb3_rhub.hcd = hcd;
+}
+
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
{
struct xhci_hcd *xhci;
@@ -5215,7 +5266,6 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
* quirks
*/
struct device *dev = hcd->self.sysdev;
- unsigned int minor_rev;
int retval;
/* Accept arbitrarily long scatter-gather lists */
@@ -5230,60 +5280,14 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
xhci = hcd_to_xhci(hcd);
if (usb_hcd_is_primary_hcd(hcd)) {
- xhci->main_hcd = hcd;
- xhci->usb2_rhub.hcd = hcd;
- /* Mark the first roothub as being USB 2.0.
- * The xHCI driver will register the USB 3.0 roothub.
- */
- hcd->speed = HCD_USB2;
- hcd->self.root_hub->speed = USB_SPEED_HIGH;
- /*
- * USB 2.0 roothub under xHCI has an integrated TT,
- * (rate matching hub) as opposed to having an OHCI/UHCI
- * companion controller.
- */
- hcd->has_tt = 1;
+ xhci_hcd_init_usb2_data(xhci, hcd);
} else {
- /*
- * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
- * should return 0x31 for sbrn, or that the minor revision
- * is a two digit BCD containig minor and sub-minor numbers.
- * This was later clarified in xHCI 1.2.
- *
- * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
- * minor revision set to 0x1 instead of 0x10.
- */
- if (xhci->usb3_rhub.min_rev == 0x1)
- minor_rev = 1;
- else
- minor_rev = xhci->usb3_rhub.min_rev / 0x10;
-
- switch (minor_rev) {
- case 2:
- hcd->speed = HCD_USB32;
- hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
- hcd->self.root_hub->rx_lanes = 2;
- hcd->self.root_hub->tx_lanes = 2;
- hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x2;
- break;
- case 1:
- hcd->speed = HCD_USB31;
- hcd->self.root_hub->speed = USB_SPEED_SUPER_PLUS;
- hcd->self.root_hub->ssp_rate = USB_SSP_GEN_2x1;
- break;
- }
- xhci_info(xhci, "Host supports USB 3.%x %sSuperSpeed\n",
- minor_rev,
- minor_rev ? "Enhanced " : "");
-
- xhci->usb3_rhub.hcd = hcd;
- /* xHCI private pointer was set in xhci_pci_probe for the second
- * registered roothub.
- */
+ xhci_hcd_init_usb3_data(xhci, hcd);
return 0;
}
mutex_init(&xhci->mutex);
+ xhci->main_hcd = hcd;
xhci->cap_regs = hcd->regs;
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
--
2.25.1
