On 07/05/2022 11:29, Cixi Geng wrote: > From: Cixi Geng <cixi.geng1@xxxxxxxxxx> > > The Spreadtrum PMIC SC27xx integrated typec port controller. > add the bindings to describe sc27xx typec controller. > > Signed-off-by: Cixi Geng <cixi.geng1@xxxxxxxxxx> > --- > .../bindings/usb/sprd,sc27xx-typec.yaml | 72 +++++++++++++++++++ > 1 file changed, 72 insertions(+) > create mode 100644 Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml > > diff --git a/Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml b/Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml > new file mode 100644 > index 000000000000..6e49198c88da > --- /dev/null > +++ b/Documentation/devicetree/bindings/usb/sprd,sc27xx-typec.yaml > @@ -0,0 +1,72 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2022 Unisoc Inc. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/usb/sprd,sc27xx-typec.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SC27XX Type-C port controller > + > +description: > + The UNISOC, also know as Spreadtrum, SC27XX is a USB Type-C port controller which > + supports role and plug orientation detection using the CC pins. It is > + compatible with the USB Type-C Cable and Connector Specification v1.2. > + > +maintainers: > + - Cixi Geng <gengcixi@xxxxxxxxx> > + > +properties: > + compatible: > + enum: > + - sprd,sc2730-typec > + - sprd,sc2721-typec Order alphabetically, please. > + - sprd,ump96xx-typec > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + sprd,mode: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + The Type-C port mode type This does not look appropriate. You need to use usb-connector.yaml and its power-role property. Check existing examples. Even without usb-connector.yaml schema, you should not hard-code some magical 32-bit unknown numbers without any documented meaning (bindings)... > + > + nvmem-cells: > + maxItems: 2 > + description: > + Reference to an nvmem node for the calibration data. > + > + nvmem-cell-names: > + items: > + - const: typec_cc1_cal > + - const: typec_cc2_cal > + > +required: > + - compatible > + - reg > + - sprd,mode > + - nvmem-cells > + - nvmem-cell-names > + > +additionalProperties: false > + > +examples: > + - | > + pmic { > + #address-cells = <1>; > + #size-cells = <0>; > + > + pmic_typec: typec@380 { > + compatible = "sprd,sc2730-typec"; > + interrupt-parent = <&sc2730_pmic>; > + interrupts = <8>; > + reg = <0x380>; Put reg just after compatible. > + sprd,mode = <2>; > + nvmem-cells = <&typec_cc1_cal>, <&typec_cc2_cal>; > + nvmem-cell-names = "typec_cc1_cal", "typec_cc2_cal"; > + status = "okay"; Examples do not have status. No point. > + }; > + }; > +... Best regards, Krzysztof