[v15 5/6] usb: dwc3: qcom: Configure wakeup interrupts during suspend

[Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>]

From: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>

Configure DP/DM interrupts to detect line state changes based on
hs_phy_mode. Enable the triggers opposite of what the current
DP, DM levels. For HS/FS mode enable DM interrupt and for LS enable DP
interrupt.

Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
---
 drivers/usb/dwc3/dwc3-qcom.c | 26 ++++++++++++++++++++------
 1 file changed, 20 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 7352124..9804a19 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -316,22 +316,36 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
 
 static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
 
-	dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS) {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+	} else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS) {
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	} else {
+		dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
+	}
 
 	dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
 }
 
 static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
 {
-	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
+	struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3);
 
-	dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+	dwc3_qcom_enable_wakeup_irq(qcom->hs_phy_irq);
 
-	dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_LS) {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+	} else if (dwc->hs_phy_mode & PHY_MODE_USB_HOST_HS) {
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	} else {
+		dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq);
+		dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq);
+	}
 
 	dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq);
 }
-- 
2.7.4