[PATCH net-next 6/7] net: phy: smsc: Cache interrupt mask

[Lukas Wunner <lukas@xxxxxxxxx>]

Cache the interrupt mask to avoid re-reading it from the PHY upon every
interrupt.  The PHY may be located on a USB device, so the additional
read may unnecessarily increase interrupt overhead and latency.

Signed-off-by: Lukas Wunner <lukas@xxxxxxxxx>
---
 drivers/net/phy/smsc.c | 24 +++++++++++-------------
 1 file changed, 11 insertions(+), 13 deletions(-)

diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c
index d8cac02a79b9..a521d48b22a7 100644
--- a/drivers/net/phy/smsc.c
+++ b/drivers/net/phy/smsc.c
@@ -44,6 +44,7 @@ static struct smsc_hw_stat smsc_hw_stats[] = {
 };
 
 struct smsc_phy_priv {
+	u16 intmask;
 	bool energy_enable;
 	struct clk *refclk;
 };
@@ -58,7 +59,6 @@ static int smsc_phy_ack_interrupt(struct phy_device *phydev)
 static int smsc_phy_config_intr(struct phy_device *phydev)
 {
 	struct smsc_phy_priv *priv = phydev->priv;
-	u16 intmask = 0;
 	int rc;
 
 	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
@@ -66,12 +66,15 @@ static int smsc_phy_config_intr(struct phy_device *phydev)
 		if (rc)
 			return rc;
 
-		intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6;
+		priv->intmask = MII_LAN83C185_ISF_INT4 | MII_LAN83C185_ISF_INT6;
 		if (priv->energy_enable)
-			intmask |= MII_LAN83C185_ISF_INT7;
-		rc = phy_write(phydev, MII_LAN83C185_IM, intmask);
+			priv->intmask |= MII_LAN83C185_ISF_INT7;
+
+		rc = phy_write(phydev, MII_LAN83C185_IM, priv->intmask);
 	} else {
-		rc = phy_write(phydev, MII_LAN83C185_IM, intmask);
+		priv->intmask = 0;
+
+		rc = phy_write(phydev, MII_LAN83C185_IM, 0);
 		if (rc)
 			return rc;
 
@@ -83,13 +86,8 @@ static int smsc_phy_config_intr(struct phy_device *phydev)
 
 static irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev)
 {
-	int irq_status, irq_enabled;
-
-	irq_enabled = phy_read(phydev, MII_LAN83C185_IM);
-	if (irq_enabled < 0) {
-		phy_error(phydev);
-		return IRQ_NONE;
-	}
+	struct smsc_phy_priv *priv = phydev->priv;
+	int irq_status;
 
 	irq_status = phy_read(phydev, MII_LAN83C185_ISF);
 	if (irq_status < 0) {
@@ -97,7 +95,7 @@ static irqreturn_t smsc_phy_handle_interrupt(struct phy_device *phydev)
 		return IRQ_NONE;
 	}
 
-	if (!(irq_status & irq_enabled))
+	if (!(irq_status & priv->intmask))
 		return IRQ_NONE;
 
 	phy_trigger_machine(phydev);
-- 
2.35.2