Make sure not to set run_stop bit or link state change request while
initiating soft-reset. Register read-modify-write operation may
unintentionally start the controller before the initialization completes
with its previous DCTL value, which can cause initialization failure.
Fixes: f59dcab17629 ("usb: dwc3: core: improve reset sequence")
Cc: <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>
---
drivers/usb/dwc3/core.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 1ca9dae57855..d28cd1a6709b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -274,7 +274,8 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
reg |= DWC3_DCTL_CSFTRST;
- dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ reg &= ~DWC3_DCTL_RUN_STOP;
+ dwc3_gadget_dctl_write_safe(dwc, reg);
/*
* For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
base-commit: bf95c4d4630c7a2c16e7b424fdea5177d9ce0864
--
2.28.0
