Re: [PATCH 1/2] dt-bindings: usb: tps6598x: Make the interrupts property optional

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 18/04/2022 08:19, Aswath Govindraju wrote:
> Hi Roger,
> 
> On 14/04/22 23:40, Roger Quadros wrote:
>> Hi,
>>
>> On 14/04/2022 11:31, Aswath Govindraju wrote:
>>> Support for polling has been added in the driver, which will be used by
>>> default if interrupts property is not populated. Therefore, remove
>>> interrupts and interrupt-names from the required properties and add a note
>>> under interrupts property describing the above support in driver.
>>>
>>> Suggested-by: Roger Quadros <rogerq@xxxxxxxxxx>
>>
>> I did not suggest to make interrupts optional by default.
>>
>> What I suggested was that if a DT property exists to explicitly
>> indicate polling mode then interrupts are not required.
>>
> 
> ohh okay, got it. However, may I know if adding a dt property to
> indicate polling for aiding the driver, is the correct approach to model it?
> 
> In terms of modelling hardware, as interrupts are not connected we are
> not populating the interrupts property. Shouldn't that be all. If we are
> adding a property explicitly to indicate polling that can be used by
> driver, wouldn't that be a software aid being added in the device tree?

The hardware (tps6598x chip) has an interrupt pin and is expected to be used
in normal case.

Some buggy boards might have forgot to connect it. We are adding polling mode only for these buggy boards. ;)
So polling mode is an exception.

cheers,
-roger

> 
> Thanks,
> Aswath
> 
>>> Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
>>> ---
>>>  Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 4 ++--
>>>  1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
>>> index a4c53b1f1af3..1c4b8c6233e5 100644
>>> --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
>>> +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml
>>> @@ -25,6 +25,8 @@ properties:
>>>  
>>>    interrupts:
>>>      maxItems: 1
>>> +    description:
>>> +      If interrupts are not populated then by default polling will be used.
>>>  
>>>    interrupt-names:
>>>      items:
>>> @@ -33,8 +35,6 @@ properties:
>>>  required:
>>>    - compatible
>>>    - reg
>>> -  - interrupts
>>> -  - interrupt-names
>>>  
>>>  additionalProperties: true
>>>  
>>
>> cheers,
>> -roger



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux