Absolute paths in $ref should always begin with '/schemas'. The tools
mostly work with it omitted, but for correctness the path should be
everything except the hostname as that is taken from the schema's $id
value. This scheme is defined in the json-schema spec.
Cc: Hector Martin <marcan@xxxxxxxxx>
Cc: Sven Peter <sven@xxxxxxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Vivien Didelot <vivien.didelot@xxxxxxxxx>
Cc: Florian Fainelli <f.fainelli@xxxxxxxxx>
Cc: Vladimir Oltean <olteanv@xxxxxxxxx>
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Paolo Abeni <pabeni@xxxxxxxxxx>
Cc: Mark Brown <broonie@xxxxxxxxxx>
Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: Mukesh Savaliya <msavaliy@xxxxxxxxxxxxxx>
Cc: Akash Asthana <akashast@xxxxxxxxxxxxxx>
Cc: Bayi Cheng <bayi.cheng@xxxxxxxxxxxx>
Cc: Chuanhong Guo <gch981213@xxxxxxxxx>
Cc: Min Guo <min.guo@xxxxxxxxxxxx>
Cc: netdev@xxxxxxxxxxxxxxx
Cc: linux-spi@xxxxxxxxxxxxxxx
Cc: linux-usb@xxxxxxxxxxxxxxx
Signed-off-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml | 2 +-
Documentation/devicetree/bindings/net/dsa/dsa-port.yaml | 2 +-
Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml | 2 +-
.../devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml | 2 +-
Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml | 2 +-
Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml | 2 +-
Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml | 4 ++--
Documentation/devicetree/bindings/usb/mediatek,musb.yaml | 2 +-
8 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
index b6b5d3a912b3..0dc957a56d35 100644
--- a/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
+++ b/Documentation/devicetree/bindings/arm/apple/apple,pmgr.yaml
@@ -42,7 +42,7 @@ patternProperties:
description:
The individual power management domains within this controller
type: object
- $ref: /power/apple,pmgr-pwrstate.yaml#
+ $ref: /schemas/power/apple,pmgr-pwrstate.yaml#
required:
- compatible
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
index e60867c7c571..07a85f7b17e0 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/dsa-port.yaml
@@ -15,7 +15,7 @@ description:
Ethernet switch port Description
allOf:
- - $ref: "http://devicetree.org/schemas/net/ethernet-controller.yaml#";
+ - $ref: /schemas/net/ethernet-controller.yaml#
properties:
reg:
diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
index a776cd37c297..95fcb43675d6 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
@@ -103,7 +103,7 @@ patternProperties:
supports up to 50MHz, up to four chip selects, programmable
data path from 4 bits to 32 bits and numerous protocol
variants.
- $ref: /spi/spi-controller.yaml#
+ $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
index be3cc7faed53..41e60fe4b09f 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-nor.yaml
@@ -18,7 +18,7 @@ description: |
capability of this controller.
allOf:
- - $ref: /spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
index 055524fe8327..5a60fba14bba 100644
--- a/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml
@@ -16,7 +16,7 @@ description: The QSPI controller allows SPI protocol communication in single,
as NOR flash.
allOf:
- - $ref: /spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
index fe014020da69..a3ab1a1f1eb4 100644
--- a/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
+++ b/Documentation/devicetree/bindings/spi/sprd,spi-adi.yaml
@@ -44,7 +44,7 @@ description: |
compatibility.
allOf:
- - $ref: /spi/spi-controller.yaml#
+ - $ref: /schemas/spi/spi-controller.yaml#
properties:
compatible:
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 77db1233516e..df766f8de872 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -132,7 +132,7 @@ properties:
default: host
connector:
- $ref: /connector/usb-connector.yaml#
+ $ref: /schemas/connector/usb-connector.yaml#
description:
Connector for dual role switch, especially for "gpio-usb-b-connector"
type: object
@@ -191,7 +191,7 @@ properties:
patternProperties:
"^usb@[0-9a-f]+$":
type: object
- $ref: /usb/mediatek,mtk-xhci.yaml#
+ $ref: /schemas/usb/mediatek,mtk-xhci.yaml#
description:
The xhci should be added as subnode to mtu3 as shown in the following
example if the host mode is enabled.
diff --git a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
index 03d62d60ce5f..11a33f9b1f17 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,musb.yaml
@@ -63,7 +63,7 @@ properties:
maxItems: 1
connector:
- $ref: /connector/usb-connector.yaml#
+ $ref: /schemas/connector/usb-connector.yaml#
description: Connector for dual role switch
type: object
--
2.32.0
