Hi, On a imx8mm-iotgateway board running kernel 5.17-rc6 I am getting the following smsc95xx errors after a 'reboot' command: ci_hdrc ci_hdrc.1: remove, state 1 usb usb2: USB disconnect, device number 1 usb 2-1: USB disconnect, device number 2 usb 2-1.1: USB disconnect, device number 3 smsc95xx 2-1.1:1.0 eth1: unregister 'smsc95xx' usb-ci_hdrc.1-1.1, smsc95xx USB 2.0 Ethernet smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: Failed to read reg index 0x00000114: -19 smsc95xx 2-1.1:1.0 eth1: Error reading MII_ACCESS smsc95xx 2-1.1:1.0 eth1: __smsc95xx_mdio_read: MII is busy smsc95xx 2-1.1:1.0 eth1: hardware isn't capable of remote wakeup usb 2-1.4: USB disconnect, device number 4 ci_hdrc ci_hdrc.1: USB bus 2 deregistered ci_hdrc ci_hdrc.0: remove, state 4 usb usb1: USB disconnect, device number 1 ci_hdrc ci_hdrc.0: USB bus 1 deregistered imx2-wdt 30280000.watchdog: Device shutdown: Expect reboot! reboot: Restarting system smsc95xx register accesses are happening after the device is unregistered. What would be the correct way to prevent such smsc95xx register accesses to happen? Hi Frieder, I see that imx8mm-kontron-n801x-s.dts also uses an SMSC9514 device. Do you also see such errors after running "reboot"? Thanks, Fabio Estevam
