Re: [PATCH 2/4] dt-bindings: usb: add TS5USBA224 USB/Audio switch mux

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Mar 01, 2022 at 02:20:06PM +0100, Alvin Šipraga wrote:
> From: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
> 
> The TS5USBA224 is a USB High Speed/Audio switch mux IC controlled via
> GPIO. It is typically composed with a Type-C port controller with Audio
> Accessory mode detection.
> 
> Signed-off-by: Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
> ---
>  .../bindings/usb/ti,ts5usba224.yaml           | 56 +++++++++++++++++++
>  1 file changed, 56 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/ti,ts5usba224.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/ti,ts5usba224.yaml b/Documentation/devicetree/bindings/usb/ti,ts5usba224.yaml
> new file mode 100644
> index 000000000000..0a488b961906
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/ti,ts5usba224.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/ti,ts5usba224.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: TS5USBA224 USB 2.0 High Speed and Audio mux DT bindings
> +
> +description:
> +  The Texas Instruments TS5USBA224 is a double-pole, double throw
> +  (DPDT) multiplexer that includes a low-distortion audio switch and a
> +  USB 2.0 High Speed switch in the same package.
> +
> +maintainers:
> +  - Alvin Šipraga <alsi@xxxxxxxxxxxxxxx>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - ti,ts5usba224
> +
> +  asel-gpio:
> +    description: Output GPIO for A_SEL signal
> +    maxItems: 1
> +
> +  accessory:
> +    type: boolean
> +    description:
> +      Indicates that this is an Accessory Mode mux.
> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description:
> +      OF graph bindings modelling a Type-C port controller.

What does that mean?

There's a couple of Type-C bindings on the list ATM. Without block 
diagrams of all the relevant components and the corresponding graph, I 
can't say whether any of this graph usage makes sense.

> +
> +required:
> +  - compatible
> +  - asel-gpio
> +  - accessory
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    usbaudiomux@0 {
> +      compatible = "ti,ts5usba224";
> +      asel-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
> +      accessory;
> +
> +      port {
> +        usb_audio_mux1: endpoint {
> +          remote-endpoint = <&typec1_mux>;
> +        };
> +      };
> +    };
> -- 
> 2.35.1
> 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux