Alan Stern wrote: > On Wed, 16 Sep 2009, Jason Wessel wrote: > > >> The first open of the usb serial HW has the termios initialized to the >> default of 9600 baud, and this will override what ever was setup via >> the original console initialization. >> > > I don't understand. The first open of the console hardware occurs in > console.c as part of usb_console_setup(), and it uses the baud rate > passed in via the console options. Why does anything need to get > saved? > The initialization in console.c is done with a dummy tty structure that is thrown away. It is thrown away because it was not connected to any device handle. Any new tty that is opened defaults to 9600 baud, for the mct_u232 driver as an example, if you boot the system with console=ttyUSB0,115200, when mingetty starts it will inherit 9600 from the first tty that is opened, vs reading the value from the HW. Even if you have a pl2303 and boot with the 115200 baud, you can run "stty -a < /dev/ttyUSB0" and you will see it reports it is running at 9600. The pl2303 driver just happens to work because it handles the baud differently. I elected to save the baud because: 1) There was no uniform interface to read the current baud from the usb hardware 2) There was no documented API for getting tty to attach when you create the initial console. If there is a better way to fix this, it would be good to continue the discussion. Thanks, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
