From: Bin Yang <yangbin@xxxxxxxxxxxxxx> In the 3.0 device core, if the core is programmed to operate in 2.0 only, then setting the GUCTL1.DEV_FORCE_20_CLK_FOR_30_CLK makes the internal 2.0(utmi/ulpi) clock to be routed as the 3.0 (pipe) clock. Enabling this feature allows the pipe3 clock to be not-running when forcibly operating in 2.0 device mode. Signed-off-by: Bin Yang <yangbin@xxxxxxxxxxxxxx> Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx> --- drivers/usb/dwc3/core.c | 5 +++++ drivers/usb/dwc3/core.h | 1 + 2 files changed, 6 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 18adddfba3da..416d83a055fe 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1167,6 +1167,11 @@ static int dwc3_core_init(struct dwc3 *dwc) if (dwc->parkmode_disable_ss_quirk) reg |= DWC3_GUCTL1_PARKMODE_DISABLE_SS; + if (DWC3_VER_IS_WITHIN(DWC3, 290A, ANY) && + (dwc->maximum_speed == USB_SPEED_HIGH || + dwc->maximum_speed == USB_SPEED_FULL)) + reg |= DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK; + dwc3_writel(dwc->regs, DWC3_GUCTL1, reg); } diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index eb9c1efced05..ea3ca04406bb 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -259,6 +259,7 @@ /* Global User Control 1 Register */ #define DWC3_GUCTL1_DEV_DECOUPLE_L1L2_EVT BIT(31) #define DWC3_GUCTL1_TX_IPGAP_LINECHECK_DIS BIT(28) +#define DWC3_GUCTL1_DEV_FORCE_20_CLK_FOR_30_CLK BIT(26) #define DWC3_GUCTL1_DEV_L1_EXIT_BY_HW BIT(24) #define DWC3_GUCTL1_PARKMODE_DISABLE_SS BIT(17) -- 2.25.1