Hi Thinh, On 2/15/2022 9:14 AM, Thinh Nguyen wrote: > Jung Daehwan wrote: >> Hi Thinh, >> >> On Mon, Feb 14, 2022 at 06:44:33PM +0000, Thinh Nguyen wrote: >>> Hi, >>> >>> Daehwan Jung wrote: >>>> It always sets DWC3_EP_END_TRANSFER_PENDING in dwc3_stop_active_transfer >>>> even if dwc3_send_gadget_ep_cmd fails. It can cause some problems like >>> >>> How does it fail? Timed out? >> >> Yes, timed out. >>> >>>> skipping clear stall commmand or giveback from dequeue. We fix to set it >>>> only when ep cmd success. Additionally, We clear DWC3_EP_TRANSFER_STARTED >>>> for next trb to start transfer not update transfer. >>> >>> We shouldn't do this. Things will be out of sync. It may work for 1 >>> scenario, but it won't work for others. >>> >>> Please help me understand a few things: >>> >>> 1) What is the scenario that triggers this? Is it random? >>> >> ep cmd timeout occurs on dequeue request from user side. End Transfer command >> would be sent in dwc3_stop_active transfer. > > At the high level, what's triggering the request dequeue? Is it from a > disconnect, change of interface, or simply function driver protocol that > changes it. > > What application was used to trigger this? > Sorry for jumping in here, but looks like Daehwan is running into a similar issue I am seeing as well. At least in my scenario, the dequeue is coming from a function driver which exposes a device to userspace. Once that device is closed, it will issue a dequeue on all pending/submitted requests. >> >>> 2) Are there other traffics pending while issuing the End Transfer >>> command? If so, what transfer type(s)? >>> >> I haven't checked it yet. > > Can you check? > For the cases where we've collected a crash log, we can see that during the END transfer timeouts there was always a pending EP0 transaction. We had reached out to our internal HW folks to get some inputs on what could be causing this kind of issue, and we were able to get some recommendations from their Synopsis POCs. It was mentioned that if there was an active EP0 transfer, an end transfer command on a non-control EP can fail w/ timed out. >> >>> 3) Have you tried increasing the timeout? >>> >> No, I haven't. > > Can you try up to 10 seconds (just for experiment) > I've tried this too, and it did not help. >>> BR, >>> Thinh >>> >> >> This issue occurs very rarely on customer. I only have restricted >> information. That's why I've been trying to reproduce it. > > How did you test your fix if you can't reproduce it? > >> >> Wesley may have run into same issue and you can see this issue in detail. >> https://urldefense.com/v3/__https://protect2.fireeye.com/v1/url?k=9d423b69-fc3fd32e-9d43b026-74fe485fff30-77a099b52659410d&q=1&e=20b4d9f5-2599-4f57-8b6a-7c4ec167d228&u=https*3A*2F*2Flore.kernel.org*2Flinux-usb*2F20220203080017.27339-1-quic_wcheng*40quicinc.com*2F__;JSUlJSUlJQ!!A4F2R9G_pg!JWPzNLoO3BFX_IZCVzmHPtxq6frr_VFbSNNaxSQylunt1Y4EauTOefth2LCIcVEuTx8E$ >> > > I can take a look, but please provide the tracepoints of the failure if > you can reproduce it. > Let me see if I have any previous traces I can share. If not, I have a pretty reliable repro set up I can collect a trace for you. For now, I will focus on just getting the endxfer timeout seen during ep dequeue. As mentioned on my patchset, this can happen during device-initiated disconnect as well. Thanks Wesley Cheng
