Commit e0082698b689 ("usb: dwc3: ulpi: conditionally resume ULPI PHY") fixed an issue where ULPI transfers would timeout if any requests where send to the phy sometime after init, giving it enough time to auto-suspend. Commit e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") changed the behavior to instead of clearing the DWC3_GUSB2PHYCFG_SUSPHY bit, add an extra sleep when it is set. But on Bay Trail devices, when phy_set_mode() gets called during init, this leads to errors like these: [ 28.451522] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a [ 28.464089] tusb1210 dwc3.ulpi: error -110 writing val 0x01 to reg 0x0a Add "snps,dis_u2_susphy_quirk" to the settings for Bay Trail devices to fix this. This restores the old behavior for Bay Trail devices, since previously the DWC3_GUSB2PHYCFG_SUSPHY bit would get cleared on the first ulpi_read/_write() and then was never set again. Fixes: e5f4ca3fce90 ("usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression") Cc: Serge Semin <Sergey.Semin@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> --- drivers/usb/dwc3/dwc3-pci.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 7ff8fc8f79a9..022341aef400 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -119,6 +119,13 @@ static const struct property_entry dwc3_pci_intel_properties[] = { {} }; +static const struct property_entry dwc3_pci_intel_byt_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "peripheral"), + PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), + {} +}; + static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), @@ -161,6 +168,10 @@ static const struct software_node dwc3_pci_intel_swnode = { .properties = dwc3_pci_intel_properties, }; +static const struct software_node dwc3_pci_intel_byt_swnode = { + .properties = dwc3_pci_intel_byt_properties, +}; + static const struct software_node dwc3_pci_intel_mrfld_swnode = { .properties = dwc3_pci_mrfld_properties, }; @@ -344,7 +355,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { (kernel_ulong_t) &dwc3_pci_intel_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT), - (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, }, -- 2.33.1