On Wed, Feb 2, 2022 at 6:54 PM Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx> wrote:
>
> Andrey Smirnov wrote:
> > It is necessary that:
> >
> > ROLE_SWITCH && device_property_read_bool(dwc->dev, "usb-role-switch")
> >
> > is true in order for dwc3_get_dr_mode() to _not_ force us from OTG to
> > PERIPHERAL mode here:
> >
> > if (mode == USB_DR_MODE_OTG &&
> > (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
> > !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> > !DWC3_VER_IS_PRIOR(DWC3, 330A))
> > mode = USB_DR_MODE_PERIPHERAL;
> >
> > and dwc3_drd_init() to be called later in dwc3_core_init_mode(). So,
> > to avoid always ignoring extcon device returned by dwc3_get_extcon()
> > change dwc3_drd_init() to check and use it first, before checking if
> > dwc3_setup_role_switch() should be called.
> >
> > Cc: Felipe Balbi <balbi@xxxxxxxxxx>
> > Cc: Thinh Nguyen <thinhn@xxxxxxxxxxxx>
> > Cc: linux-usb@xxxxxxxxxxxxxxx
> > Cc: linux-kernel@xxxxxxxxxxxxxxx
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx>
> > ---
> >
> > Hopefully I didn't miss something important making this patch
> > unnecessary. Don't know if this is a good solution or not, part of me
> > thinks than maybe changing the aforementioned code in
> > dwc3_get_dr_mode() to account for extcon wopuld be
> > simpler/better. Happy to rework this.
>
> The driver either use extcon or usb-role-switch. It doesn't make sense to
> enable usb-role-switch for extcon just so the driver doesn't default
> the dr_mode to peripheral.
>
> Perhaps, this is what you're looking for? (code is not tested)
>
Yeah that kind of what I meant by "maybe changing the aforementioned code in
dwc3_get_dr_mode() to account for extcon wopuld be
simpler/better." OK let me rework the patch to do that.
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index bffd719b8b52..a52331ea7a0d 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -86,7 +86,7 @@ static int dwc3_get_dr_mode(struct dwc3 *dwc)
> * mode. If the controller supports DRD but the dr_mode is not
> * specified or set to OTG, then set the mode to peripheral.
> */
> - if (mode == USB_DR_MODE_OTG &&
> + if (mode == USB_DR_MODE_OTG && !dwc->edev &&
> (!IS_ENABLED(CONFIG_USB_ROLE_SWITCH) ||
> !device_property_read_bool(dwc->dev, "usb-role-switch")) &&
> !DWC3_VER_IS_PRIOR(DWC3, 330A))
> @@ -1715,6 +1715,13 @@ static int dwc3_probe(struct platform_device *pdev)
> goto err2;
> }
>
> + dwc->edev = dwc3_get_extcon(dwc);
> + if (IS_ERR(dwc->edev)) {
> + ret = PTR_ERR(dwc->edev);
> + dev_err(dwc->dev, "failed to get extcon %d\n", ret);
> + goto err3;
> + }
> +
> ret = dwc3_get_dr_mode(dwc);
> if (ret)
> goto err3;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 63089c7fb530..d02fcfdc74db 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -585,16 +585,7 @@ int dwc3_drd_init(struct dwc3 *dwc)
> {
> int ret, irq;
>
> - dwc->edev = dwc3_get_extcon(dwc);
> - if (IS_ERR(dwc->edev))
> - return PTR_ERR(dwc->edev);
> -
> - if (ROLE_SWITCH &&
> - device_property_read_bool(dwc->dev, "usb-role-switch")) {
> - ret = dwc3_setup_role_switch(dwc);
> - if (ret < 0)
> - return ret;
> - } else if (dwc->edev) {
We probably don't even need to move this around. If "usb-role-switch"
isn't going to be set then that "if" could go first and not interfere.
> + if (dwc->edev) {
> dwc->edev_nb.notifier_call = dwc3_drd_notifier;
> ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
> &dwc->edev_nb);
> @@ -604,6 +595,11 @@ int dwc3_drd_init(struct dwc3 *dwc)
> }
>
> dwc3_drd_update(dwc);
> + } else if (ROLE_SWITCH &&
> + device_property_read_bool(dwc->dev, "usb-role-switch")) {
> + ret = dwc3_setup_role_switch(dwc);
> + if (ret < 0)
> + return ret;
> } else {
> dwc3_set_prtcap(dwc, DWC3_GCTL_PRTCAP_OTG);
>
>
