Add efuse node and cells used by t-phy to fix the bit shift issue Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- v2: use hw auto load for u2phy which has no this issue Note: depend on the reviewing patch: [v9,3/3] arm64: dts: Add mediatek SoC mt8195 and evaluation board https://patchwork.kernel.org/patch/12711296 --- arch/arm64/boot/dts/mediatek/mt8195.dtsi | 55 ++++++++++++++++++++++++ 1 file changed, 55 insertions(+) diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi index a363e82f6988..240a21708806 100644 --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi @@ -695,6 +695,53 @@ status = "disabled"; }; + efuse: efuse@11c10000 { + compatible = "mediatek,mt8195-efuse", "mediatek,efuse"; + reg = <0 0x11c10000 0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + u3_tx_imp_p0: usb3-tx-imp@184 { + reg = <0x184 0x1>; + bits = <0 5>; + }; + u3_rx_imp_p0: usb3-rx-imp@184 { + reg = <0x184 0x2>; + bits = <5 5>; + }; + u3_intr_p0: usb3-intr@185 { + reg = <0x185 0x1>; + bits = <2 6>; + }; + comb_tx_imp_p1: usb3-tx-imp@186 { + reg = <0x186 0x1>; + bits = <0 5>; + }; + comb_rx_imp_p1: usb3-rx-imp@186 { + reg = <0x186 0x2>; + bits = <5 5>; + }; + comb_intr_p1: usb3-intr@187 { + reg = <0x187 0x1>; + bits = <2 6>; + }; + u2_intr_p0: usb2-intr-p0@188 { + reg = <0x188 0x1>; + bits = <0 5>; + }; + u2_intr_p1: usb2-intr-p1@188 { + reg = <0x188 0x2>; + bits = <5 5>; + }; + u2_intr_p2: usb2-intr-p2@189 { + reg = <0x189 0x1>; + bits = <2 5>; + }; + u2_intr_p3: usb2-intr-p3@189 { + reg = <0x189 0x2>; + bits = <7 5>; + }; + }; + u3phy2: t-phy@11c40000 { compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3"; #address-cells = <1>; @@ -877,6 +924,10 @@ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, <&topckgen CLK_TOP_SSUSB_PHY_P1_REF>; clock-names = "ref", "da_ref"; + nvmem-cells = <&comb_intr_p1>, + <&comb_rx_imp_p1>, + <&comb_tx_imp_p1>; + nvmem-cell-names = "intr", "rx_imp", "tx_imp"; #phy-cells = <1>; }; }; @@ -901,6 +952,10 @@ clocks = <&apmixedsys CLK_APMIXED_PLL_SSUSB26M>, <&topckgen CLK_TOP_SSUSB_PHY_REF>; clock-names = "ref", "da_ref"; + nvmem-cells = <&u3_intr_p0>, + <&u3_rx_imp_p0>, + <&u3_tx_imp_p0>; + nvmem-cell-names = "intr", "rx_imp", "tx_imp"; #phy-cells = <1>; }; }; -- 2.18.0
