Re: [PATCH V4 4/6] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri 21 Jan 07:53 CST 2022, Souradeep Chowdhury wrote:

> Add the Embedded USB Debugger(EUD) device tree node. The
> node contains EUD base register region and EUD mode
> manager register regions along with the interrupt entry.
> Also add the typec connector node for EUD which is attached to
> EUD node via port. EUD is also attached to DWC3 node via port.
> Also add the role-switch property to dwc3 node.
> 
> Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 39 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 39 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> index 937c2e0..daac831 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> @@ -2583,6 +2583,14 @@
>  				phys = <&usb_2_hsphy>;
>  				phy-names = "usb2-phy";
>  				maximum-speed = "high-speed";
> +				usb-role-switch;
> +				ports {
> +					port@0 {
> +						usb2_role_switch: endpoint {
> +							remote-endpoint = <&eud_ep>;
> +						};
> +					};
> +				};
>  			};
>  		};
>  
> @@ -2624,6 +2632,37 @@
>  			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		eud: eud@88e0000 {
> +			compatible = "qcom,sc7280-eud","qcom,eud";
> +			reg = <0 0x88e0000 0 0x2000>,
> +			      <0 0x88e2000 0 0x1000>;
> +			interrupt-parent = <&pdc>;
> +			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;

I find "interrupts-extended = <&pdc 11 IRQ_TYPE_LEVEL_HIGH>;" cleaner
than having to specify both parent and interrupts.

> +			ports {
> +				port@0 {
> +					eud_ep: endpoint {
> +						remote-endpoint = <&usb2_role_switch>;
> +					};
> +				};
> +				port@1 {
> +					eud_con: endpoint {
> +						remote-endpoint = <&con_eud>;
> +					};
> +				};
> +			};
> +		};
> +
> +		eud_typec: connector {

The connector should be a child of the Type-C controller, which I know
differs between the various devices on this platform. So you should
leave &eud_con without a remote-endpoint and then fill that in for each
device, based on respective Type-C controller.


But beyond that, I think this design looks good now!

Regards,
Bjorn

> +			compatible = "usb-c-connector";
> +			ports {
> +				port@0 {
> +					con_eud: endpoint {
> +						remote-endpoint = <&eud_con>;
> +					};
> +				};
> +			};
> +		};
> +
>  		nsp_noc: interconnect@a0c0000 {
>  			reg = <0 0x0a0c0000 0 0x10000>;
>  			compatible = "qcom,sc7280-nsp-noc";
> -- 
> 2.7.4
> 



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux