Some fixes related to the Xilinx ZynqMP DWC3 wrapper driver to allow
ZynqMP USB to work properly when the hardware is configured in USB
2.0-only mode.
Changes since v6:
-skip USB core resets and register settings which are not necessary
when USB3 PHY is not specified
-added patches to implement ULPI PHY reset in driver
Changes since v5:
-code formatting fixes, no functional change
Changes since v4:
-dropped DWC3 core patches as they are superseded by Sean Anderson's
patchset "usb: dwc3: Calculate REFCLKPER et. al. from reference clock",
ZynqMP-specific patches unchanged
Changes since v3:
-fixed DT schema dt-doc-validate error
Changes since v2:
-additional kerneldoc fixes
Changes since v1:
-added DT binding documentation for new attribute
-kerneldoc formatting and reworded comments
Robert Hancock (4):
usb: dwc3: xilinx: Skip resets and USB3 register settings for USB2.0
mode
usb: dwc3: xilinx: Fix error handling when getting USB3 PHY
dt-bindings: usb: dwc3-xilinx: Added reset-gpios
usb: dwc3: xilinx: Add ULPI PHY reset handling
.../devicetree/bindings/usb/dwc3-xilinx.yaml | 4 ++
drivers/usb/dwc3/dwc3-xilinx.c | 41 ++++++++++++++++---
2 files changed, 40 insertions(+), 5 deletions(-)
--
2.31.1
