Hi Steev,
On 1/20/2022 10:52 AM, Sandeep Maheswaram wrote:
Hi Pavan,
On 1/18/2022 3:22 PM, Pavan Kondeti wrote:
On Tue, Jan 18, 2022 at 12:12:30AM -0600, Steev Klimaszewski wrote:
On 1/16/22 11:44 PM, Sandeep Maheswaram wrote:
Enable the interrupts during probe and remove the disable interrupts
function.
Signed-off-by: Sandeep Maheswaram <quic_c_sanm@xxxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-qcom.c | 28 ++++------------------------
1 file changed, 4 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c
b/drivers/usb/dwc3/dwc3-qcom.c
index 54dc3d3..7c5e636 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -306,25 +306,7 @@ static void dwc3_qcom_enable_wakeup_irq(int irq)
enable_irq_wake(irq);
}
-static void dwc3_qcom_disable_wakeup_irq(int irq)
-{
- if (!irq)
- return;
-
- disable_irq_wake(irq);
- disable_irq_nosync(irq);
-}
-static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
-{
- dwc3_qcom_disable_wakeup_irq(qcom->hs_phy_irq);
-
- dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
-
- dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
-
- dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
-}
static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
{
@@ -356,9 +338,6 @@ static int dwc3_qcom_suspend(struct dwc3_qcom
*qcom)
if (ret)
dev_warn(qcom->dev, "failed to disable interconnect:
%d\n", ret);
- if (device_may_wakeup(qcom->dev))
- dwc3_qcom_enable_interrupts(qcom);
-
qcom->is_suspended = true;
return 0;
@@ -372,9 +351,6 @@ static int dwc3_qcom_resume(struct dwc3_qcom
*qcom)
if (!qcom->is_suspended)
return 0;
- if (device_may_wakeup(qcom->dev))
- dwc3_qcom_disable_interrupts(qcom);
-
for (i = 0; i < qcom->num_clocks; i++) {
ret = clk_prepare_enable(qcom->clks[i]);
if (ret < 0) {
@@ -832,6 +808,10 @@ static int dwc3_qcom_probe(struct
platform_device *pdev)
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
device_init_wakeup(&pdev->dev, 1);
+
+ if (device_may_wakeup(qcom->dev))
+ dwc3_qcom_enable_interrupts(qcom);
+
qcom->is_suspended = false;
pm_runtime_set_active(dev);
pm_runtime_enable(dev);
Hi Sandeep,
I was testing this series on my Lenovo Yoga C630, and with this
patch in
particular applied, my system will no longer boot. Unfortunately I
don't get
any sort of good output at all, I just get hung tasks when trying to
probe
things it would seem.
With the other 5 patches in the series applied, the system still
boots and
works correctly.
Sandeep,
Enable DP/DM interrupts all the time might be creating a storm of
interrupts.
calling enable_irq_wake() during probe is okay, but not the
enable_irq().
Did you verify your change with a Highspeed/Fullspeed device connected?
Thanks,
Pavan
I didn't face any such issue with devices connected.
I think this is because I used IRQ_TYPE_EDGE_BOTH in device tree and
Steev has IRQ_TYPE_LEVEL_HIGH in his device tree.
When i changed to IRQ_TYPE_LEVEL_HIGH I also observed a storm of
interrupts in my device though it booted .
Regards
Sandeep
Can you try with IRQ_TYPE_EDGE_BOTH in your device tree and see if you
are getting the issue.
Regards
Sandeep
