Add required voltage regulators for USB DWC3 block on Exynos5250 Arndale
board.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5250-arndale.dts | 5 +++++
arch/arm/boot/dts/exynos5250.dtsi | 2 +-
2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 3583095fbb2a..e639cf6d9b64 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -632,3 +632,8 @@ i2c_ddc: i2c-10 {
#size-cells = <0>;
};
};
+
+&usbdrd {
+ vdd10-supply = <&ldo15_reg>;
+ vdd33-supply = <&ldo12_reg>;
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
index 139778928b93..a6f48f31f618 100644
--- a/arch/arm/boot/dts/exynos5250.dtsi
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -637,7 +637,7 @@ i2s2: i2s@12d70000 {
#sound-dai-cells = <1>;
};
- usb_dwc3 {
+ usbdrd: usb3 {
compatible = "samsung,exynos5250-dwusb3";
clocks = <&clock CLK_USB3>;
clock-names = "usbdrd30";
--
2.32.0
