The commit was temporary for testing purposes only. The next commit will include proper Kconfig and Makefile changes. Signed-off-by: Michal Nazarewicz <m.nazarewicz@xxxxxxxxxxx> --- drivers/usb/gadget/Kconfig | 18 ------------------ drivers/usb/gadget/Makefile | 2 -- 2 files changed, 0 insertions(+), 20 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index e36a71e..cb0bb84 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -668,24 +668,6 @@ config USB_FILE_STORAGE_TEST behavior of USB Mass Storage hosts. Not needed for normal operation. -config USB_MASS_STORAGE - tristate "Mass Storage Gadget" - depends on BLOCK - help - The Mass Storage Gadget acts as a USB Mass Storage disk drive. - As its storage repository it can use a regular file or a block - device (in much the same way as the "loop" device driver), - specified as a module parameter or sysfs option. - - This is heavily based on File-backed Storage Gadget and in most - cases you will want to use FSG instead. This gadget is mostly - here to test the functionality of the Mass Storage Function - which may be used with composite framework. - - Say "y" to link the driver statically, or "m" to build - a dynamically linked module called "g_file_storage". If unsure, - consider File-backed Storage Gadget. - config USB_G_SERIAL tristate "Serial Gadget (with CDC ACM and CDC OBEX support)" help diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile index 8a4996e..b653183 100644 --- a/drivers/usb/gadget/Makefile +++ b/drivers/usb/gadget/Makefile @@ -32,7 +32,6 @@ g_serial-objs := serial.o g_midi-objs := gmidi.o gadgetfs-objs := inode.o g_file_storage-objs := file_storage.o -g_mass_storage-objs := f_mass_storage.o g_printer-objs := printer.o g_cdc-objs := cdc2.o @@ -40,7 +39,6 @@ obj-$(CONFIG_USB_ZERO) += g_zero.o obj-$(CONFIG_USB_ETH) += g_ether.o obj-$(CONFIG_USB_GADGETFS) += gadgetfs.o obj-$(CONFIG_USB_FILE_STORAGE) += g_file_storage.o -obj-$(CONFIG_USB_MASS_STORAGE) += g_mass_storage.o obj-$(CONFIG_USB_G_SERIAL) += g_serial.o obj-$(CONFIG_USB_G_PRINTER) += g_printer.o obj-$(CONFIG_USB_MIDI_GADGET) += g_midi.o -- 1.6.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
