On 17.1.2022 7.39, Puma Hsu wrote:
> When HCE(Host Controller Error) is set, it means an internal
> error condition has been detected. Software needs to re-initialize
> the HC, so add this check in xhci resume.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Puma Hsu <pumahsu@xxxxxxxxxx>
> ---
> v2: Follow Sergey Shtylyov <s.shtylyov@xxxxxx>'s comment.
> v3: Add stable@xxxxxxxxxxxxxxx for stable release.
> v4: Refine the commit message.
>
> drivers/usb/host/xhci.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index dc357cabb265..ab440ce8420f 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -1146,8 +1146,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
> temp = readl(&xhci->op_regs->status);
> }
>
> - /* If restore operation fails, re-initialize the HC during resume */
> - if ((temp & STS_SRE) || hibernated) {
> + /* If restore operation fails or HC error is detected, re-initialize the HC during resume */
> + if ((temp & (STS_SRE | STS_HCE)) || hibernated) {
Add a debug message in case we reset due to HCE
-Mathias
