Re: [PATCH V3 5/7] arm64: dts: qcom: sc7280: Add EUD dt node and dwc3 connector

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 1/7/2022 6:23 AM, Bjorn Andersson wrote:
On Tue 04 Jan 03:58 PST 2022, Souradeep Chowdhury wrote:

Add the Embedded USB Debugger(EUD) device tree node. The
node contains EUD base register region and EUD mode
manager register regions along with the interrupt entry.
Also add the connector to EUD which is mapped as the child
of dwc3. The connector is attached to EUD via port. Also add
the role-switch property to dwc3 node.

Signed-off-by: Souradeep Chowdhury <quic_schowdhu@xxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sc7280.dtsi | 25 +++++++++++++++++++++++++
  1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d0..2d14e5c 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1315,6 +1315,18 @@
  				phys = <&usb_2_hsphy>;
  				phy-names = "usb2-phy";
  				maximum-speed = "high-speed";
+				usb-role-switch;
+				usb_con: eud_usb_connector {
I think this is backwards.

Iiuc you have dwc3 <-> EUD <-> connector, where the connector typically
would be represented in relation to a Type-C controller.

So I think this graph should be looking something like:


dwc3 {
     ports {
         port {
             dwc3_eud: endpoint {
                 remote-endpoint = <&eud_ep>;
             };
         };
     };
};

eud {
     ports {
         port {
             eud_dwc3: endpoint {
                 remote-endpoint = <&dwc3_eud>;
             };
         };

         port {
             eud_con: endpoint {
                 remote-endpoint = <&con_eud>;
             };
         };
     };
};

connector {
     compatible = "usb-c-connector";

     ports {
         port {
             con_eud: endpoint {
                 remote-endpoint = <&eud_con>;
             };
         };
     };
};

With EUD "forwarding" the role switching requests from the connector, or
overriding them if the EUD is enabled.

Alternatively the dwc3 would be in a graph with both the eud and the
connector, but I don't know how to ensure that the EUD decision takes
precedence over the type-c controllers role request...


In the case of us having a type-c controller, such as the pmic_glink,
the connector node would then be a child of the controller.
Ack. Will align the device tree with this structure.

Regards,
Bjorn

+					compatible = "qcom,usb-connector-eud",
+						     "usb-c-connector";
+					ports {
+						port@0 {
+							usb2_role_switch: endpoint {
+								remote-endpoint = <&eud_ep>;
+							};
+						};
+					};
+				};
  			};
  		};
@@ -1339,6 +1351,19 @@
  			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
  		};
+ eud: eud@88e0000 {
+			compatible = "qcom,sc7280-eud","qcom,eud";
+			reg = <0 0x88e0000 0 0x2000>,
+			      <0 0x88e2000 0 0x1000>;
+			interrupt-parent = <&pdc>;
+			interrupts = <11 IRQ_TYPE_LEVEL_HIGH>;
+			port {
+				eud_ep: endpoint {
+					remote-endpoint = <&usb2_role_switch>;
+				};
+			};
+		};
+
  		nsp_noc: interconnect@a0c0000 {
  			reg = <0 0x0a0c0000 0 0x10000>;
  			compatible = "qcom,sc7280-nsp-noc";
--
2.7.4




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux