These clocks are not used by the dwc3-xilinx driver except to
enable/disable them. Move them to the dwc3 node so its driver can use
them to configure the reference clock period.
Signed-off-by: Sean Anderson <sean.anderson@xxxxxxxx>
---
arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi | 4 ++--
arch/arm64/boot/dts/xilinx/zynqmp.dtsi | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
index 1e0b1bca7c94..8493dd7d5f1f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi
@@ -223,11 +223,11 @@ &uart1 {
clocks = <&zynqmp_clk UART1_REF>, <&zynqmp_clk LPD_LSBUS>;
};
-&usb0 {
+&dwc3_0 {
clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
};
-&usb1 {
+&dwc3_1 {
clocks = <&zynqmp_clk USB1_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index 74e66443e4ce..ba68fb8529ee 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -811,7 +811,6 @@ usb0: usb@ff9d0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9d0000 0x0 0x100>;
- clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_0>;
resets = <&zynqmp_reset ZYNQMP_RESET_USB0_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB0_HIBERRESET>,
@@ -825,6 +824,7 @@ dwc3_0: usb@fe200000 {
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg";
interrupts = <0 65 4>, <0 69 4>;
+ clock-names = "bus_early", "ref";
#stream-id-cells = <1>;
iommus = <&smmu 0x860>;
snps,quirk-frame-length-adjustment = <0x20>;
@@ -838,7 +838,6 @@ usb1: usb@ff9e0000 {
status = "disabled";
compatible = "xlnx,zynqmp-dwc3";
reg = <0x0 0xff9e0000 0x0 0x100>;
- clock-names = "bus_clk", "ref_clk";
power-domains = <&zynqmp_firmware PD_USB_1>;
resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
<&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
@@ -852,6 +851,7 @@ dwc3_1: usb@fe300000 {
interrupt-parent = <&gic>;
interrupt-names = "dwc_usb3", "otg";
interrupts = <0 70 4>, <0 74 4>;
+ clock-names = "bus_early", "ref";
#stream-id-cells = <1>;
iommus = <&smmu 0x861>;
snps,quirk-frame-length-adjustment = <0x20>;
--
2.25.1
