From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> Add device tree bindings for the Microchip fpga fabric based "core" PWM controller. Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx> --- .../bindings/pwm/microchip,corepwm.yaml | 75 +++++++++++++++++++ 1 file changed, 75 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml diff --git a/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml new file mode 100644 index 000000000000..26a77cde2465 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/microchip,corepwm.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) + +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/microchip,corepwm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip ip core PWM controller bindings + +maintainers: + - Conor Dooley <conor.dooley@xxxxxxxxxxxxx> + +description: | + corePWM is an 16 channel pulse width modulator FPGA IP + + https://www.microsemi.com/existing-parts/parts/152118 + +properties: + compatible: + items: + - const: microchip,corepwm-rtl-v4 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#pwm-cells": + const: 2 + + microchip,sync-update: + description: | + In synchronous mode, all channels are updated at the beginning of the PWM period. + Asynchronous mode is relevant to applications such as LED control, where + synchronous updates are not required. Asynchronous mode lowers the area size, + reducing shadow register requirements. This can be set at run time, provided + SHADOW_REG_EN is asserted. SHADOW_REG_EN is set by the FPGA bitstream programmed + to the device. + Each bit corresponds to a PWM channel & represents whether synchronous mode is + possible for the PWM channel. + + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0 + + microchip,dac-mode: + description: | + Optional, per-channel Low Ripple DAC mode is possible on this IP core. It creates + a minimum period pulse train whose High/Low average is that of the chosen duty + cycle. This "DAC" will have far better bandwidth and ripple performance than the + standard PWM algorithm can achieve. + Each bit corresponds to a PWM channel & represents whether dac mode is enabled + that PWM channel. + + $ref: /schemas/types.yaml#/definitions/uint16 + default: 0 + +required: + - compatible + - reg + - clocks + - "#pwm-cells" + +additionalProperties: false + +examples: + - | + #include "dt-bindings/clock/microchip,mpfs-clock.h" + pwm@41000000 { + compatible = "microchip,corepwm-rtl-v4"; + microchip,sync-update = /bits/ 16 <0>; + clocks = <&clkcfg CLK_FIC3>; + reg = <0x41000000 0xF0>; + #pwm-cells = <2>; + }; -- 2.32.0