Re: [PATCH] usb: gadget: f_fs: Clear ffs_eventfd in ffs_data_reset.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Dec 17, 2021 at 08:29:54PM +0900, Vincent Pelletier wrote:
> On Fri, Dec 17, 2021 at 6:51 PM Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> >
> > On Wed, Dec 15, 2021 at 12:32:49AM +0000, Vincent Pelletier wrote:
> > > ffs_data_reset is called from both ffs_fs_kill_sb and ffs_ep0_release, so
> > > it ends up being called twice when userland closes ep0 and then unmounts
> > > f_fs. If userland provided an eventfd along with function's USB
> > > descriptors, ffs_data_clear (via ffs_data_reset) ends up calling
> > > eventfd_ctx_put as many times, causing a refcount underflow warning
> > > (as of 5.15 at least). NULL-ify ffs_eventfd to prevent these extraneous
> > > eventfd_ctx_put calls.
> > >
> > > For completeness, ffs_data_clear actually ends up being called thrice, the
> > > last call being before the whole ffs structure gets freed, so when this
> > > specific sequence happens there is a second underflow happening (but not
> > > being reported):
> > >
> > > /sys/kernel/debug/tracing# modprobe usb_f_fs
> > > /sys/kernel/debug/tracing# echo ffs_data_clear > set_ftrace_filter
> > > /sys/kernel/debug/tracing# echo function > current_tracer
> > > /sys/kernel/debug/tracing# echo 1 > tracing_on
> > > (setup gadget, run and kill function userland process, teardown gadget)
> > > /sys/kernel/debug/tracing# echo 0 > tracing_on
> > > /sys/kernel/debug/tracing# cat trace
> > > # tracer: function
> > > #
> > > # entries-in-buffer/entries-written: 3/3   #P:1
> > > #
> > > #                                _-----=> irqs-off
> > > #                               / _----=> need-resched
> > > #                              | / _---=> hardirq/softirq
> > > #                              || / _--=> preempt-depth
> > > #                              ||| / _-=> migrate-disable
> > > #                              |||| /     delay
> > > #           TASK-PID     CPU#  |||||  TIMESTAMP  FUNCTION
> > > #              | |         |   |||||     |         |
> > >  smartcard-openp-436     [000] .....  1946.208786: ffs_data_clear <-ffs_data_closed
> > >  smartcard-openp-431     [000] .....  1946.279147: ffs_data_clear <-ffs_data_closed
> > >  smartcard-openp-431     [000] .n...  1946.905512: ffs_data_clear <-ffs_data_put
> > >
> > > Warning output corresponding to above trace:
> > > [ 1946.284139] WARNING: CPU: 0 PID: 431 at lib/refcount.c:28 refcount_warn_saturate+0x110/0x15c
> > > [ 1946.293094] refcount_t: underflow; use-after-free.
> > > [ 1946.298164] Modules linked in: usb_f_ncm(E) u_ether(E) usb_f_fs(E) hci_uart(E) btqca(E) btrtl(E) btbcm(E) btintel(E) bluetooth(E) nls_ascii(E) nls_cp437(E) vfat(E) fat(E) bcm2835_v4l2(CE) bcm2835_mmal_vchiq(CE) videobuf2_vmalloc(E) videobuf2_memops(E) sha512_generic(E) videobuf2_v4l2(E) sha512_arm(E) videobuf2_common(E) videodev(E) cpufreq_dt(E) snd_bcm2835(CE) brcmfmac(E) mc(E) vc4(E) ctr(E) brcmutil(E) snd_soc_core(E) snd_pcm_dmaengine(E) drbg(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) drm_kms_helper(E) cec(E) ansi_cprng(E) rc_core(E) syscopyarea(E) raspberrypi_cpufreq(E) sysfillrect(E) sysimgblt(E) cfg80211(E) max17040_battery(OE) raspberrypi_hwmon(E) fb_sys_fops(E) regmap_i2c(E) ecdh_generic(E) rfkill(E) ecc(E) bcm2835_rng(E) rng_core(E) vchiq(CE) leds_gpio(E) libcomposite(E) fuse(E) configfs(E) ip_tables(E) x_tables(E) autofs4(E) ext4(E) crc16(E) mbcache(E) jbd2(E) crc32c_generic(E) sdhci_iproc(E) sdhci_pltfm(E) sdhci(E)
> > > [ 1946.399633] CPU: 0 PID: 431 Comm: smartcard-openp Tainted: G         C OE     5.15.0-1-rpi #1  Debian 5.15.3-1
> > > [ 1946.417950] Hardware name: BCM2835
> > > [ 1946.425442] Backtrace:
> > > [ 1946.432048] [<c08d60a0>] (dump_backtrace) from [<c08d62ec>] (show_stack+0x20/0x24)
> > > [ 1946.448226]  r7:00000009 r6:0000001c r5:c04a948c r4:c0a64e2c
> > > [ 1946.458412] [<c08d62cc>] (show_stack) from [<c08d9ae0>] (dump_stack+0x28/0x30)
> > > [ 1946.470380] [<c08d9ab8>] (dump_stack) from [<c0123500>] (__warn+0xe8/0x154)
> > > [ 1946.482067]  r5:c04a948c r4:c0a71dc8
> > > [ 1946.490184] [<c0123418>] (__warn) from [<c08d6948>] (warn_slowpath_fmt+0xa0/0xe4)
> > > [ 1946.506758]  r7:00000009 r6:0000001c r5:c0a71dc8 r4:c0a71e04
> > > [ 1946.517070] [<c08d68ac>] (warn_slowpath_fmt) from [<c04a948c>] (refcount_warn_saturate+0x110/0x15c)
> > > [ 1946.535309]  r8:c0100224 r7:c0dfcb84 r6:ffffffff r5:c3b84c00 r4:c24a17c0
> > > [ 1946.546708] [<c04a937c>] (refcount_warn_saturate) from [<c0380134>] (eventfd_ctx_put+0x48/0x74)
> > > [ 1946.564476] [<c03800ec>] (eventfd_ctx_put) from [<bf5464e8>] (ffs_data_clear+0xd0/0x118 [usb_f_fs])
> > > [ 1946.582664]  r5:c3b84c00 r4:c2695b00
> > > [ 1946.590668] [<bf546418>] (ffs_data_clear [usb_f_fs]) from [<bf547cc0>] (ffs_data_closed+0x9c/0x150 [usb_f_fs])
> > > [ 1946.609608]  r5:bf54d014 r4:c2695b00
> > > [ 1946.617522] [<bf547c24>] (ffs_data_closed [usb_f_fs]) from [<bf547da0>] (ffs_fs_kill_sb+0x2c/0x30 [usb_f_fs])
> > > [ 1946.636217]  r7:c0dfcb84 r6:c3a12260 r5:bf54d014 r4:c229f000
> > > [ 1946.646273] [<bf547d74>] (ffs_fs_kill_sb [usb_f_fs]) from [<c0326d50>] (deactivate_locked_super+0x54/0x9c)
> > > [ 1946.664893]  r5:bf54d014 r4:c229f000
> > > [ 1946.672921] [<c0326cfc>] (deactivate_locked_super) from [<c0326df8>] (deactivate_super+0x60/0x64)
> > > [ 1946.690722]  r5:c2a09000 r4:c229f000
> > > [ 1946.698706] [<c0326d98>] (deactivate_super) from [<c0349a28>] (cleanup_mnt+0xe4/0x14c)
> > > [ 1946.715553]  r5:c2a09000 r4:00000000
> > > [ 1946.723528] [<c0349944>] (cleanup_mnt) from [<c0349b08>] (__cleanup_mnt+0x1c/0x20)
> > > [ 1946.739922]  r7:c0dfcb84 r6:c3a12260 r5:c3a126fc r4:00000000
> > > [ 1946.750088] [<c0349aec>] (__cleanup_mnt) from [<c0143d10>] (task_work_run+0x84/0xb8)
> > > [ 1946.766602] [<c0143c8c>] (task_work_run) from [<c010bdc8>] (do_work_pending+0x470/0x56c)
> > > [ 1946.783540]  r7:5ac3c35a r6:c0d0424c r5:c200bfb0 r4:c200a000
> > > [ 1946.793614] [<c010b958>] (do_work_pending) from [<c01000c0>] (slow_work_pending+0xc/0x20)
> > > [ 1946.810553] Exception stack(0xc200bfb0 to 0xc200bff8)
> > > [ 1946.820129] bfa0:                                     00000000 00000000 000000aa b5e21430
> > > [ 1946.837104] bfc0: bef867a0 00000001 bef86840 00000034 bef86838 bef86790 bef86794 bef867a0
> > > [ 1946.854125] bfe0: 00000000 bef86798 b67b7a1c b6d626a4 60000010 b5a23760
> > > [ 1946.865335]  r10:00000000 r9:c200a000 r8:c0100224 r7:00000034 r6:bef86840 r5:00000001
> > > [ 1946.881914]  r4:bef867a0
> > > [ 1946.888793] ---[ end trace 7387f2a9725b28d0 ]---
> > >
> > > Signed-off-by: Vincent Pelletier <plr.vincent@xxxxxxxxx>
> > > ---
> > >  drivers/usb/gadget/function/f_fs.c | 1 +
> > >  1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/usb/gadget/function/f_fs.c b/drivers/usb/gadget/function/f_fs.c
> > > index e20c19a0f106..437141a11ec6 100644
> > > --- a/drivers/usb/gadget/function/f_fs.c
> > > +++ b/drivers/usb/gadget/function/f_fs.c
> > > @@ -1791,6 +1791,7 @@ static void ffs_data_reset(struct ffs_data *ffs)
> > >       ffs_data_clear(ffs);
> > >
> > >       ffs->epfiles = NULL;
> > > +     ffs->ffs_eventfd = NULL;
> >
> > Shouldn't this be happening in ffs_data_clear() instead?  After the call
> > to eventfd_ctx_put() as that is when the file descriptor is properly
> > dropped.
> 
> This was my initial intent while debugging, but when preparing this
> submission I realised epfiles is in the same boat, and
> ffs_data_reset is where it is getting set to NULL.
> So I followed the pattern.
> 
> If preferred, I can move both to ffs_data_clear, as I think it would
> make the code more obviously correct (...and it may have made
> this bug more obvious and maybe avoided it entirely).

Both should be moved there, that is the correct thing to do.

thanks,

greg k-h



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux