The first open of the usb serial HW has the termios initialized to the
default of 9600 baud, and this will override what ever was setup via
the original console initialization.
The solution is to save the console baud rate and re-use it later on
the first open, so as to allow the use of baud rates other than 9600
for the usb serial console.
Signed-off-by: Jason Wessel <jason.wessel@xxxxxxxxxxxxx>
Cc: Greg KH <gregkh@xxxxxxx>
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
---
drivers/usb/serial/console.c | 1 +
drivers/usb/serial/usb-serial.c | 4 +++-
include/linux/usb/serial.h | 1 +
3 files changed, 5 insertions(+), 1 deletions(-)
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 0e4f2e4..35ba616 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -175,6 +175,7 @@ static int usb_console_setup(struct console *co, char *options)
/* The console is special in terms of closing the device so
* indicate this port is now acting as a system console. */
port->console = 1;
+ port->console_init_baud = baud;
retval = 0;
out:
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 7ca4ced..7ec5e0c 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -245,7 +245,9 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
* first time the port is opened and it is not a
* console port where the HW has already been
* initialized */
- if (!port->console) {
+ if (port->console) {
+ tty_encode_baud_rate(tty, port->console_init_baud, port->console_init_baud);
+ } else {
retval = serial->type->open(tty, port, filp);
if (retval)
goto bailout_interface_put;
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 0ec50ba..d5e586f 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -107,6 +107,7 @@ struct usb_serial_port {
char throttled;
char throttle_req;
char console;
+ int console_init_baud;
unsigned long sysrq; /* sysrq timeout */
struct device dev;
enum port_dev_state dev_state;
--
1.6.3.1.9.g95405b
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
