On 12/13/21 10:13 AM, Dinh Nguyen wrote:
Hi Minas,
Thanks for replying!
On 12/13/21 3:47 AM, Minas Harutyunyan wrote:
Hi Dinh,
On 12/9/2021 1:44 AM, Dinh Nguyen wrote:
Hi Arthur,
The usb driver is getting this error:
[ 1.539856] Hardware name: SoCFPGA Agilex SoCDK (DT)
[ 1.544799] Call trace:
[ 1.547233] dump_backtrace+0x0/0x1c0
[ 1.550897] show_stack+0x18/0x68
[ 1.554202] dump_stack+0xd8/0x134
[ 1.557597] __report_bad_irq+0x38/0xf0
[ 1.561423] note_interrupt+0x31c/0x3e8
[ 1.565244] handle_irq_event_percpu+0x60/0x90
[ 1.569671] handle_irq_event+0x48/0xe0
[ 1.573491] handle_fasteoi_irq+0xb0/0x138
[ 1.577574] generic_handle_irq+0x30/0x48
[ 1.581567] __handle_domain_irq+0x60/0xb8
[ 1.585646] gic_handle_irq+0xb4/0xd0
[ 1.589300] el1_irq+0xb8/0x150
[ 1.592428] arch_cpu_idle+0x18/0x28
[ 1.595992] default_idle_call+0x24/0x5c
[ 1.599899] do_idle+0x1f4/0x290
[ 1.603118] cpu_startup_entry+0x28/0x68
[ 1.607026] rest_init+0xd8/0xe8
[ 1.610242] arch_call_rest_init+0x10/0x1c
[ 1.614329] start_kernel+0x50c/0x544
[ 1.617980] handlers:
[ 1.620241] [<00000000ae601aac>] dwc2_handle_common_intr
[ 1.625541] [<00000000255d793a>] dwc2_hsotg_irq
[ 1.630056] [<000000000bc68ab4>] usb_hcd_irq
[ 1.634312] Disabling IRQ #33
After a git-bisect, the result is this commit:
commit 50fb0c128b6e8df62200ba85c05ecd6b1396476d
Author: Artur Petrosyan<Arthur.Petrosyan@xxxxxxxxxxxx>
Date: Tue Apr 13 11:37:15 2021 +0400
usb: dwc2: Add clock gating entering flow by system suspend
If not hibernation nor partial power down are supported,
clock gating is used to save power.
Adds a new flow of entering clock gating when PC is
suspended.
Signed-off-by: Artur Petrosyan<Arthur.Petrosyan@xxxxxxxxxxxx>
Link:https://lore.kernel.org/r/20210413073716.30C13A0094@xxxxxxxxxxxxxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman<gregkh@xxxxxxxxxxxxxxxxxxx>
The DWC2 USB version on the Agilex platform is
0x4F54330A
Could you please provide HW configuration registers values (GHWCFG1-4).
[ 0.987779] dwc2 ffb00000.usb: GHWCFG1 @0xFFFF800012940044 :
0x00000000
[ 0.994644] dwc2 ffb00000.usb: GHWCFG2 @0xFFFF800012940048 :
0x238FFC90
[ 1.001498] dwc2 ffb00000.usb: GHWCFG3 @0xFFFF80001294004C :
0x1F8002E8
[ 1.008350] dwc2 ffb00000.usb: GHWCFG4 @0xFFFF800012940050 :
0xFE0F0020
I did a little debugging, and noticed that the GINTSTS_PRTINT is firing,
so the dwc2_handle_common_intr() is getting called continuously. There's
doesn't seem to be way to handle the GINTSTS_PRTINT bit, because there's
a check for device_mode().
It looks like the LPMMode bit is disabled in the GHWCFG3. Could that be
the reason why?
Dinh
