On 21-12-13 13:20:01, Pawel Laszczak wrote: > From: Pawel Laszczak <pawell@xxxxxxxxxxx> > > Patch puts content of cdnsp_gadget_pullup function inside > spin_lock_irqsave and spin_lock_restore section. > This construction is required here to keep the data consistency, > otherwise some data can be changed e.g. from interrupt context. > > Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") > Reported-by: Ken (Jian) He <jianhe@xxxxxxxxxxxxx> > cc: <stable@xxxxxxxxxxxxxxx> > Signed-off-by: Pawel Laszczak <pawell@xxxxxxxxxxx> > --- > drivers/usb/cdns3/cdnsp-gadget.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/cdns3/cdnsp-gadget.c b/drivers/usb/cdns3/cdnsp-gadget.c > index f6d231760a6a..d0c040556984 100644 > --- a/drivers/usb/cdns3/cdnsp-gadget.c > +++ b/drivers/usb/cdns3/cdnsp-gadget.c > @@ -1544,8 +1544,10 @@ static int cdnsp_gadget_pullup(struct usb_gadget *gadget, int is_on) > { > struct cdnsp_device *pdev = gadget_to_cdnsp(gadget); > struct cdns *cdns = dev_get_drvdata(pdev->dev); > + unsigned long flags; > > trace_cdnsp_pullup(is_on); > + spin_lock_irqsave(&pdev->lock, flags); If the interrupt bottom half is pending, the consistent issue may still exist, you may let the bottom half has finished first, eg: calling disable_irq before spin_lock_irqsave. Peter > > if (!is_on) { > cdnsp_reset_device(pdev); > @@ -1553,6 +1555,9 @@ static int cdnsp_gadget_pullup(struct usb_gadget *gadget, int is_on) > } else { > cdns_set_vbus(cdns); > } > + > + spin_unlock_irqrestore(&pdev->lock, flags); > + > return 0; > } > > -- > 2.25.1 > -- Thanks, Peter Chen