On Mon, Dec 13, 2021 at 01:32:38PM +0300, Heikki Krogerus wrote: > Hi, > > I'm now using the helpers device_match_acpi_dev() and > device_match_fwnode() like Andy suggested. No other changes. FWIW, Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> > The original cover letter: > > This removes the need for the drivers to always separately evaluate > the _PLD. With the USB Type-C connector and USB port mapping this > allows us to start using the component framework and remove the custom > APIs. > > So far the only users of the _PLD information have been the USB > drivers, but it seems it will be used also at least in some camera > drivers later. These nevertheless touch mostly USB drivers. > > Rafael, is it still OK if Greg takes these? > > Prashant, can you test these? > > thanks, > > > Heikki Krogerus (5): > acpi: Store the Physical Location of Device (_PLD) information > usb: Use the cached ACPI _PLD entry > usb: Link the ports to the connectors they are attached to > usb: typec: port-mapper: Convert to the component framework > usb: Remove usb_for_each_port() > > Documentation/ABI/testing/sysfs-bus-usb | 9 + > drivers/acpi/scan.c | 79 +++++++ > drivers/usb/core/port.c | 32 +++ > drivers/usb/core/usb-acpi.c | 17 +- > drivers/usb/core/usb.c | 46 ---- > drivers/usb/typec/Makefile | 3 +- > drivers/usb/typec/class.c | 2 - > drivers/usb/typec/class.h | 10 +- > drivers/usb/typec/port-mapper.c | 280 +++--------------------- > include/acpi/acpi_bus.h | 14 ++ > include/linux/usb.h | 9 - > include/linux/usb/typec.h | 12 - > 12 files changed, 184 insertions(+), 329 deletions(-) > > -- > 2.33.0 > -- With Best Regards, Andy Shevchenko